Em Sun, 12 Oct 2014 13:03:09 +0300
Olli Salonen <olli.salo...@iki.fi> escreveu:
> Added debug logging using dev_dgb.
>
> Signed-off-by: Olli Salonen <olli.salo...@iki.fi>
> ---
> drivers/media/usb/dvb-usb-v2/dvbsky.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/usb/dvb-usb-v2/dvbsky.c
> b/drivers/media/usb/dvb-usb-v2/dvbsky.c
> index 502b52c..fabe3f5 100644
> --- a/drivers/media/usb/dvb-usb-v2/dvbsky.c
> +++ b/drivers/media/usb/dvb-usb-v2/dvbsky.c
> @@ -68,6 +68,9 @@ static int dvbsky_stream_ctrl(struct dvb_usb_device *d, u8
> onoff)
> u8 obuf_pre[3] = { 0x37, 0, 0 };
> u8 obuf_post[3] = { 0x36, 3, 0 };
>
> + dev_dbg(&d->udev->dev, "state: %s\n", (onoff == 1)
> + ? "on" : "off");
> +
> mutex_lock(&state->stream_mutex);
> ret = dvbsky_usb_generic_rw(d, obuf_pre, 3, NULL, 0);
> if (!ret && onoff) {
> @@ -91,6 +94,8 @@ static int dvbsky_gpio_ctrl(struct dvb_usb_device *d, u8
> gport, u8 value)
> int ret;
> u8 obuf[3], ibuf[2];
>
> + dev_dbg(&d->udev->dev, "gport: %d, value: %d\n", gport, value);
> +
> obuf[0] = 0x0e;
> obuf[1] = gport;
> obuf[2] = value;
> @@ -234,6 +239,9 @@ static int dvbsky_usb_set_voltage(struct dvb_frontend *fe,
> struct dvbsky_state *state = d_to_priv(d);
> u8 value;
>
> + dev_dbg(&d->udev->dev, "voltage: %s\n",
> + (voltage == SEC_VOLTAGE_OFF) ? "off" : "on");
> +
> if (voltage == SEC_VOLTAGE_OFF)
> value = 0;
> else
> @@ -262,8 +270,10 @@ static int dvbsky_read_mac_addr(struct dvb_usb_adapter
> *adap, u8 mac[6])
> }
> };
>
> - if (i2c_transfer(&d->i2c_adap, msg, 2) == 2)
> + if (i2c_transfer(&d->i2c_adap, msg, 2) == 2) {
> memcpy(mac, ibuf, 6);
> + dev_dbg(&d->udev->dev, "MAC: %pM\n", ibuf);
> + }
>
> return 0;
> }
> @@ -274,6 +284,8 @@ static int dvbsky_usb_read_status(struct dvb_frontend
> *fe, fe_status_t *status)
> struct dvbsky_state *state = d_to_priv(d);
> int ret;
>
> + dev_dbg(&d->udev->dev, "\n");
> +
> ret = state->fe_read_status(fe, status);
>
> /* it need resync slave fifo when signal change from unlock to lock.*/
> @@ -309,6 +321,9 @@ static int dvbsky_s960_attach(struct dvb_usb_adapter
> *adap)
> struct m88ts2022_config m88ts2022_config = {
> .clock = 27000000,
> };
> +
> + dev_dbg(&d->udev->dev, "\n");
> +
> memset(&info, 0, sizeof(struct i2c_board_info));
>
> /* attach demod */
> @@ -362,6 +377,8 @@ fail_attach:
>
> static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name)
> {
> + dev_dbg(&d->udev->dev, "\n");
> +
> dvbsky_gpio_ctrl(d, 0x04, 1);
> msleep(20);
> dvbsky_gpio_ctrl(d, 0x83, 0);
> @@ -378,6 +395,8 @@ static int dvbsky_init(struct dvb_usb_device *d)
> {
> struct dvbsky_state *state = d_to_priv(d);
>
> + dev_dbg(&d->udev->dev, "\n");
> +
> /* use default interface */
> /*
> ret = usb_set_interface(d->udev, 0, 0);
> @@ -396,6 +415,8 @@ static void dvbsky_exit(struct dvb_usb_device *d)
> struct dvbsky_state *state = d_to_priv(d);
> struct i2c_client *client;
>
> + dev_dbg(&d->udev->dev, "\n");
> +
No need to add new debug macros that only prints the called functions,
as you could get it too with Kernel tracing.
> client = state->i2c_client_tuner;
> /* remove I2C tuner */
> if (client) {
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
