Moikka
According to logs, everything seems to be fine. You could not compare
statistics numbers between two drivers. SNR 0096 is 150DEC, which means
15dB, IIRC it was max chip could return for DVB-S.
No idea about sync etc. problems, are you sure about those? I am pretty
sure it works rather well as I haven't got bug reports from PCTV 461e
users which has that same demod + tuner.
regards
Antti
On 11/19/2014 09:28 PM, Christopher Scheuring wrote:
Hello Antti,
the guys from t...@dvbsky.net told me to contact you because of my
problems with the drivers for my DVBSKY S952.
I attached the whole conversation. Currently the main problem is if i
use the current drivers via
git(http://git.linuxtv.org/cgit.cgi/media_build.git/about/) my single
TT-Budget card works fine. But the signal from the DVDBSky S952 is very
worse: Sync problems, bad SNR, drops on video and audio... If I use the
driver dvbsky.net provides (media_build-bst-14-141106), the signal on
booth tuners is fine - but then my TT-Budget doesn't works anymore (see
end of this mail aka starting the conversation with t...@dvbsky.net).
Do you have any ideas, how I could fix this problem? Before I updated my
system (from Debian Wheezy with Kernel 3.2.0-4-amd64 everything was fine
with both cards.
If you need more detailed information, please let me know, so I could
provide them as soon as possible,
Thanks a lot and best wishes
Chris
-------- Weitergeleitete Nachricht --------
Betreff: Re: Re: Problems with Linux drivers (Debian Jessie kernel
3.16.0-4)
Datum: Wed, 19 Nov 2014 10:28:06 +0800
Von: tech <t...@dvbsky.net>
An: Christopher Scheuring <ch...@anke-und-chris.de>
Hello,
Could you report this problem to Antti Palosaari cr...@iki.fi
<mailto:cr...@iki.fi> and cc to linux-media@vger.kernel.org ?
Antti is the author/maintainer of M88DS3103 driver.
Please list the compare result of the driver from DVBSky site and
Linuxtv.org.
Max from DVBSky also register linux-media mail list.
He will get your report and co-work with Antti to fix this issue of
M88DS3103 driver from Linuxtv.org.
BR,
tech
------------------------------------------------------------------------
*From:* Christopher Scheuring<ch...@anke-und-chris.de
<mailto:ch...@anke-und-chris.de>>
*Date:* 2014-11-19 04:42:10
*To:* tech<t...@dvbsky.net <mailto:t...@dvbsky.net>>
*Cc:* <>
*Subject:* Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4)
Hello,
with the drivers from linuxtv.org and the firmware provided by your
site, both cards work.
But the DVBSky card (Montage M88DS3103) do now have a really bad
SNR!TT-Budget C-1501 works as expected. See the output of femon - the
signal of the DVBSky card was excellent with the drivers from you
site... Any idea, what could cause the problem? TV signal provided by
the DVBSky sometimes drops :-(
xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a1
*using '/dev/dvb/adapter1/frontend0'**
**FE: Montage M88DS3103 (SAT)*
status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a2
*using '/dev/dvb/adapter2/frontend0'**
**FE: Montage M88DS3103 (SAT)*
status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a0
*using '/dev/dvb/adapter0/frontend0'**
**FE: STV090x Multistandard (SAT)*
status 1f | signal a3d6 | *snr bccb* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal a3d6 | *snr bd2e* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
Here the dmesg output of the loaded drivers and firmware of the DVBSky Card:
dmesg | egrep "cx23885|i2c|m88ds3103"
c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add
DVBSky T982(Dual DVB-T2/T/C) support
9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x
device name i2c_devs array
c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add
DVBSky T982(Dual DVB-T2/T/C) support
9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x
device name i2c_devs array
c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add
DVBSky T982(Dual DVB-T2/T/C) support
9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x
device name i2c_devs array
[ 16.396426] cx23885 driver version 0.0.4 loaded
[ 16.396558] CORE cx23885[0]: subsystem: 4254:0952, board: DVBSky S952
[card=50,autodetected]
[ 16.838409] cx25840 4-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 16.909538] cx25840 4-0044: firmware: direct-loading firmware
v4l-cx23885-avcore-01.fw
[ 17.518086] cx25840 4-0044: loaded v4l-cx23885-avcore-01.fw firmware
(16382 bytes)
[ 17.533358] cx23885_dvb_register() allocating 1 frontend(s)
[ 17.533362] cx23885[0]: cx23885 based dvb card
[ 17.670143] i2c i2c-3: m88ds3103_attach: chip_id=70
[ 17.672970] i2c i2c-3: Added multiplexed i2c bus 5
[ 17.780353] DVB: registering new adapter (cx23885[0])
[ 17.780357] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend
0 (Montage M88DS3103)...
[ 17.807503] cx23885_dvb_register() allocating 1 frontend(s)
[ 17.807505] cx23885[0]: cx23885 based dvb card
[ 17.807987] i2c i2c-2: m88ds3103_attach: chip_id=70
[ 17.810783] i2c i2c-2: Added multiplexed i2c bus 6
[ 17.866021] DVB: registering new adapter (cx23885[0])
[ 17.866025] cx23885 0000:04:00.0: DVB: registering adapter 2 frontend
0 (Montage M88DS3103)...
[ 17.893182] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 17.893187] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 19,
latency: 0, mmio: 0xfda00000
[ 51.512292] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in cold
state
[ 51.818948] cx23885 0000:04:00.0: firmware: direct-loading firmware
dvb-demod-m88ds3103.fw
[ 51.818958] i2c i2c-3: m88ds3103: downloading firmware from file
'dvb-demod-m88ds3103.fw'
[ 52.720270] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in warm
state
[ 52.720276] i2c i2c-3: m88ds3103: firmware version 3.B
[ 52.734588] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in cold
state
[ 52.734618] cx23885 0000:04:00.0: firmware: direct-loading firmware
dvb-demod-m88ds3103.fw
[ 52.734621] i2c i2c-2: m88ds3103: downloading firmware from file
'dvb-demod-m88ds3103.fw'
[ 53.636110] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in warm
state
[ 53.636115] i2c i2c-2: m88ds3103: firmware version 3.B
Thanks a lot for your help.
Regards,
Chris
Am 18.11.2014 um 03:27 schrieb tech:
Hello,
Could you get the media code from linuxtv.org?
and build this driver and install.
http://git.linuxtv.org/cgit.cgi/media_build.git/about/
BR,
tech
------------------------------------------------------------------------
*From:* Christopher Scheuring<ch...@anke-und-chris.de
<mailto:ch...@anke-und-chris.de>>
*Date:* 2014-11-18 06:07:27
*To:* tech<t...@dvbsky.net <mailto:t...@dvbsky.net>>
*Cc:* <>
*Subject:* Problems with Linux drivers (Debian Jessie kernel 3.16.0-4)
Hi,
I reinstalled after updating my system with the Linux drivers for the
dvbsky cards provided by your site (media_build-bst-14-141106).
Compiling with the build_x64.sh script was successfully and I could
install the needed drivers via make install. After that the Conexant
Systems CX23885 (DVBSKY S952) card works perfectly.
Unfortunately after installing the drivers my Philips Semiconductors
SAA7146 (TT-Budget C-1501) card doesn't runs anymore - the card worked
perfectly before installing the provided drivers from your page!
If got following error message in the kernel-log:
[ 14.916814] budget_core: disagrees about version of symbol
dvb_dmxdev_init
[ 14.916819] budget_core: Unknown symbol dvb_dmxdev_init (err -22)
[ 14.916827] budget_core: disagrees about version of symbol
saa7146_wait_for_debi_done
[ 14.916829] budget_core: Unknown symbol saa7146_wait_for_debi_done
(err -22)
[ 14.916832] budget_core: disagrees about version of symbol
saa7146_i2c_adapter_prepare
[ 14.916833] budget_core: Unknown symbol saa7146_i2c_adapter_prepare
(err -22)
[ 14.916840] budget_core: disagrees about version of symbol
dvb_register_adapter
[ 14.916841] budget_core: Unknown symbol dvb_register_adapter (err -22)
[ 14.916846] budget_core: disagrees about version of symbol
dvb_dmx_swfilter_packets
[ 14.916848] budget_core: Unknown symbol dvb_dmx_swfilter_packets
(err -22)
[ 14.916862] budget_core: disagrees about version of symbol
dvb_dmx_release
[ 14.916864] budget_core: Unknown symbol dvb_dmx_release (err -22)
[ 14.916869] budget_core: disagrees about version of symbol dvb_net_init
[ 14.916871] budget_core: Unknown symbol dvb_net_init (err -22)
[ 14.916875] budget_core: disagrees about version of symbol
dvb_dmxdev_release
[ 14.916877] budget_core: Unknown symbol dvb_dmxdev_release (err -22)
[ 14.916890] budget_core: disagrees about version of symbol
dvb_net_release
[ 14.916892] budget_core: Unknown symbol dvb_net_release (err -22)
[ 14.916896] budget_core: disagrees about version of symbol
saa7146_setgpio
[ 14.916897] budget_core: Unknown symbol saa7146_setgpio (err -22)
[ 14.916902] budget_core: disagrees about version of symbol
dvb_unregister_adapter
[ 14.916904] budget_core: Unknown symbol dvb_unregister_adapter (err
-22)
[ 14.916907] budget_core: disagrees about version of symbol dvb_dmx_init
[ 14.916908] budget_core: Unknown symbol dvb_dmx_init (err -22)
I think something went wrong with the provided driver packes or some
drivers where overwritten, and some necessary not... I couldn't found
any solution in the internet.
Here my relevant system-infos:
Linux XXX 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64
GNU/Linux
The needed kernel header files 3.16.0-4-amd64 are installed.
lsmod | grep dvb
rc_dvbsky 12399 0
dvbsky_m88ds3103 25614 2
videobuf_dvb 12762 1 cx23885
videobuf_core 21832 3 videobuf_dma_sg,cx23885,videobuf_dvb
dvb_core 102010 3 cx23885,altera_ci,videobuf_dvb
i2c_core 46012 11
drm,i2c_i801,cx23885,cx25840,dvbsky_m88ds3103,nvidia,v4l2_common,tveeprom,ttpci_eeprom,tda18271,videodev
rc_core 22404 13
ir_sharp_decoder,lirc_dev,cx23885,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,rc_dvbsky,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder
Could you provide me any help for a solution getting the SAA7146
(TT-Budget C-1501) card working again with the kernel 3.16.0-4? With
the kernel 3.2.0-4-amd64 (with Debian wheezy) and the drivers
media_build-bst-13-140526 I didn't had the problems... everything
worked fine. Downgrading is no solution :-)
Attached the complete dmesg protocol.
Thanks a lot!
Regards,
Chris
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
