Dne 25.11.2014 v 19:51 Antti Palosaari napsal(a):
Moikka!
RegMap does not belong to media (v4l) but driver core. Maybe kernel 3.8
is too old and does not have that functionality.
no, it is in kernel core itself (not as module).
Update your kernel. Why you don't use it9135 driver shipped with 3.8
kernel?
while did not tune (tzap do not lock and shows snr=00000 and lines on
output comes out very slow and irregularly). It is not normal.
There is no reason on my side, why it should not work:
I had use yet 3 months ago with 3.2.0 kernel with compiled V4L new
AF9035 module, but unfortunately now (in 9/2014 ?) this driver has
changed and requires now kernel >=3.4.
And I did not find out, how to get older git tree from +- 8/2014 to use
it with my 3.2 kernel. That's why I have install newer 3.8 kernel.
--kapetr
regards
Antti
On 11/25/2014 08:45 PM, kap...@mizera.cz wrote:
Hello,
# modinfo regmap-i2c
ERROR: modinfo: could not find module regmap-i2c
I'm using standard Ubuntu kernel.
-> don't know, how to get regmap-i2c module.
It is a part of V4L ?
THX --kapetr
Dne 25.11.2014 v 17:18 Antti Palosaari napsal(a):
On 11/25/2014 05:32 PM, kap...@mizera.cz wrote:
Hello.
U12.04 with newly installed 3.8 kernel:
3.8.0-44-generic #66~precise1-Ubuntu SMP Tue Jul 15 04:01:04 UTC 2014
x86_64 x86_64 x86_64 GNU/Linux
USB dvb-t tuner:
Bus 001 Device 005: ID 048d:9135 Integrated Technology Express, Inc.
Zolid Mini DVB-T Stick
Newest V4L drivers installed. But there is an error in log by inserting
of the USB tuner:
-------------------
Nov 25 16:24:38 zly-hugo kernel: [ 315.927923] usb 1-1.3: new
high-speed USB device number 5 using ehci-pci
Nov 25 16:24:38 zly-hugo kernel: [ 316.021755] usb 1-1.3: New USB
device found, idVendor=048d, idProduct=9135
Nov 25 16:24:38 zly-hugo kernel: [ 316.021760] usb 1-1.3: New USB
device strings: Mfr=0, Product=0, SerialNumber=0
Nov 25 16:24:38 zly-hugo kernel: [ 316.023071] usb 1-1.3:
dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
Nov 25 16:24:38 zly-hugo kernel: [ 316.023443] usb 1-1.3: dvb_usb_v2:
found a 'ITE 9135 Generic' in cold state
Nov 25 16:24:38 zly-hugo kernel: [ 316.023519] usb 1-1.3: dvb_usb_v2:
downloading firmware from file 'dvb-usb-it9135-02.fw'
Nov 25 16:24:38 zly-hugo mtp-probe: checking bus 1, device 5:
"/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3"
Nov 25 16:24:38 zly-hugo kernel: [ 316.119961] usb 1-1.3:
dvb_usb_af9035: firmware version=3.40.1.0
Nov 25 16:24:38 zly-hugo kernel: [ 316.119974] usb 1-1.3: dvb_usb_v2:
found a 'ITE 9135 Generic' in warm state
Nov 25 16:24:38 zly-hugo kernel: [ 316.120972] usb 1-1.3: dvb_usb_v2:
will pass the complete MPEG2 transport stream to the software demuxer
Nov 25 16:24:38 zly-hugo kernel: [ 316.120996] DVB: registering new
adapter (ITE 9135 Generic)
Nov 25 16:24:38 zly-hugo mtp-probe: bus: 1, device: 5 was not an MTP
device
Nov 25 16:24:38 zly-hugo kernel: [ 316.123808] af9033 8-0038: firmware
version: LINK 3.40.1.0 - OFDM 3.40.1.0
Nov 25 16:24:38 zly-hugo kernel: [ 316.123812] af9033 8-0038: Afatech
AF9033 successfully attached
Nov 25 16:24:38 zly-hugo kernel: [ 316.123822] usb 1-1.3: DVB:
registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
Nov 25 16:24:38 zly-hugo kernel: [ 316.125115] it913x: probe of 8-001c
failed with error -22
---------------------
What is wrong ?
it913x_probe() fails with error -EINVAL. There is only 2 ways it could
fail, kzalloc() and regmap_init_i2c(). It must be later one.
Do you have regmap module installed?
What says: "modinfo regmap-i2c" command?
Antti
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
