Hi Hayama-san,
Thank you for the patch.
On Thursday 27 November 2014 10:25:02 Takanari Hayama wrote:
> Regardless of a number of inputs, we should always enable virtual RPF
> when BRU is used. This allows the case when there's only one input to
> BRU, and a size of the input is smaller than a size of an output of BRU.
>
> Signed-off-by: Takanari Hayama <t...@igel.co.jp>
Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
I've applied the patch to my tree. I'll wait for your reply regarding my
comments to the first patch and will then send a pull request for both.
> ---
> drivers/media/platform/vsp1/vsp1_wpf.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c
> b/drivers/media/platform/vsp1/vsp1_wpf.c index 6e05776..cb17c4d 100644
> --- a/drivers/media/platform/vsp1/vsp1_wpf.c
> +++ b/drivers/media/platform/vsp1/vsp1_wpf.c
> @@ -92,19 +92,20 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int
> enable) return 0;
> }
>
> - /* Sources. If the pipeline has a single input configure it as the
> - * master layer. Otherwise configure all inputs as sub-layers and
> - * select the virtual RPF as the master layer.
> + /* Sources. If the pipeline has a single input and BRU is not used,
> + * configure it as the master layer. Otherwise configure all
> + * inputs as sub-layers and select the virtual RPF as the master
> + * layer.
> */
> for (i = 0; i < pipe->num_inputs; ++i) {
> struct vsp1_rwpf *input = pipe->inputs[i];
>
> - srcrpf |= pipe->num_inputs == 1
> + srcrpf |= (!pipe->bru && pipe->num_inputs == 1)
> ? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
>
> : VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
>
> }
>
> - if (pipe->num_inputs > 1)
> + if (pipe->bru || pipe->num_inputs > 1)
> srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST;
>
> vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, srcrpf);
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
