Add the document for ov2640 dt.
Cc: devicet...@vger.kernel.org
Signed-off-by: Josh Wu <josh...@atmel.com>
---
v3 -> v4:
1. remove aggsigned-clocks as it's general.
2. refine the explation.
v2 -> v3:
1. fix incorrect description.
2. Add assigned-clocks & assigned-clock-rates.
3. resetb pin should be ACTIVE_LOW.
v1 -> v2:
1. change the compatible string to be consistent with verdor file.
2. change the clock and pins' name.
3. add missed pinctrl in example.
.../devicetree/bindings/media/i2c/ov2640.txt | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2640.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
new file mode 100644
index 0000000..de11ebb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
@@ -0,0 +1,46 @@
+* Omnivision ov2640 CMOS sensor
+
+The Omnivision OV2640 sensor support multiple resolutions output, such as
+CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
+output format.
+
+Required Properties:
+- compatible: Must be "ovti,ov2640"
+- clocks: reference to the xvclk input clock.
+- clock-names: Must be "xvclk".
+
+Optional Properties:
+- resetb-gpios: reference to the GPIO connected to the resetb pin, if any.
+- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+ i2c1: i2c@f0018000 {
+ ov2640: camera@0x30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn
&pinctrl_ov2640_resetb>;
+
+ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+
+ clocks = <&pck1>;
+ clock-names = "xvclk";
+
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <25000000>;
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
