Dear DVB-experts, since recently I own a DVBSky S960CI incorporating a m88ds3103. I am on 3.18.2 with two patches from 3.19 in (the S960 CI support + the "dvb-usb-dvbsky: fix i2c adapter for sp2 device" commit), using firmware 3.B for the m88ds3103.
My card is connected to a Quad LNB, to which also two set-top-box receivers and a TV with internal receiver are wired. No extra multiswitch. The card locks fine and has good reception (szap-s2 output): status 1f | signal c4e9 | snr 009a | ber 00000000 | unc fffffffe | FE_HAS_LOCK but whenever one of the three other devices connected to the same Quad LNB is turned on / off, the LOCK is lost and not regained unless I explicitly retune, e.g. by restarting szap-s2. Following an intuitive feeling, I removed FE_CAN_RECOVER from the "static struct dvb_frontend_ops m88ds3103_ops.info.caps", thus activating the swzigzag-recover method in dvb-frontend.c which seems to be disabled by the CAN_RECOVER capability of a device. After rebuilding my kernel, the card now reacquires the lock "by itself" following the swzigzag procedure. Below the mail, you can find some debug output I captured with my kernel after removing FE_CAN_RECOVER. Is FE_CAN_RECOVER really true for this device? Is something broken in my setup (the LNB is only a few days old)? Is there a better solution, maybe it would be a good idea to have a generic fallback to swzigzag in any case even for (supposedly) FE_CAN_RECOVER-capable frontends if they do not recover on their own? I would be grateful for any advice on finally getting into a stable situation - I already own one Terratec S7 (for which the driver, or firmware, can not tune to S2 channels, but works fine with the Windows-driver) and an aparently broken TT3650CI which creates broken packages out of nowhere every few seconds (both Windows and Linux) and I am slowly running out of functional DVB-USB (with CI) hardware. Cheers and thanks for any help, Oliver -------------------------- $ ./szap-s2 -h -V -c ~/.mpv/channelsS2VDR.conf -r "Das Erste HD;ARD" -S1 reading channels from file '/home/olifre/.mpv/channelsS2VDR.conf' zapping to 209 'Das Erste HD;ARD': delivery DVB-S2, modulation 8PSK sat 0, frequency 11493 MHz H, symbolrate 22000000, coderate 2/3, rolloff 0.35 stream_id -1 vpid 0x13ed, apid 0x13ee, sid 0x283d using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' Filtering for PID= 0x13ed Filtering for PID= 0x13ee status 00 | signal ffff | snr 005a | ber 00000000 | unc fffffffe | status 1f | signal c4e9 | snr 009c | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 009c | ber 00000000 | unc fffffffe | FE_HAS_LOCK ... putting one of the other receivers in standby ... status 1f | signal c4e9 | snr 009a | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 009a | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 00 | signal c4e9 | snr 0075 | ber 00000000 | unc fffffffe | status 00 | signal c4e9 | snr 0068 | ber 00007e5f | unc fffffffe | status 00 | signal c4e9 | snr 0068 | ber 00007e5f | unc fffffffe | status 00 | signal c4e9 | snr 0068 | ber 00007e5f | unc fffffffe | status 1f | signal c4e9 | snr 008b | ber 00007e5f | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 0096 | ber 00007e5f | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 0099 | ber 00007e5f | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 009a | ber 00000001 | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 009b | ber 00000001 | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 0099 | ber 00000001 | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 0099 | ber 00000001 | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 009a | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 0097 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal c4e9 | snr 0093 | ber 00000000 | unc fffffffe | FE_HAS_LOCK In kernel log with dyndebug on, from when lock was lost: ... Jan 12 19:55:19 alien17 kernel: [ 510.022420] i2c i2c-9: m88ds3103_read_status: lock=8f status=1f Jan 12 19:55:19 alien17 kernel: [ 510.022424] usb 1-1: dvb_frontend_swzigzag_update_delay: Jan 12 19:55:19 alien17 kernel: [ 510.545510] dvb_dmx_swfilter_packet: 46431 callbacks suppressed Jan 12 19:55:19 alien17 kernel: [ 510.545513] TEI detected. PID=0x13f7 data1=0x93 Jan 12 19:55:19 alien17 kernel: [ 510.545514] TEI detected. PID=0x12fb data1=0x92 Jan 12 19:55:19 alien17 kernel: [ 510.545515] TEI detected. PID=0x1c39 data1=0x9c Jan 12 19:55:19 alien17 kernel: [ 510.545516] TEI detected. PID=0xf6f data1=0xcf Jan 12 19:55:19 alien17 kernel: [ 510.545517] TEI detected. PID=0x14 data1=0xc0 Jan 12 19:55:19 alien17 kernel: [ 510.545518] TEI detected. PID=0x1a09 data1=0xba Jan 12 19:55:19 alien17 kernel: [ 510.545519] TEI detected. PID=0xc82 data1=0xec Jan 12 19:55:19 alien17 kernel: [ 510.545520] TEI detected. PID=0x1b5 data1=0xa1 Jan 12 19:55:19 alien17 kernel: [ 510.545521] TEI detected. PID=0xad7 data1=0xca Jan 12 19:55:19 alien17 kernel: [ 510.545521] TEI detected. PID=0x40 data1=0x80 Jan 12 19:55:19 alien17 kernel: [ 510.663708] usb 1-1: dvb_frontend_ioctl: (69) Jan 12 19:55:19 alien17 kernel: [ 510.664266] i2c i2c-9: m88ds3103_read_status: lock=0f status=00 Jan 12 19:55:19 alien17 kernel: [ 510.664271] usb 1-1: dvb_frontend_ioctl: (71) Jan 12 19:55:19 alien17 kernel: [ 510.667450] usb 1-1: dvb_frontend_ioctl: (72) Jan 12 19:55:19 alien17 kernel: [ 510.667453] i2c i2c-9: m88ds3103_read_snr: Jan 12 19:55:19 alien17 kernel: [ 510.669906] usb 1-1: dvb_frontend_ioctl: (70) Jan 12 19:55:19 alien17 kernel: [ 510.669909] i2c i2c-9: m88ds3103_read_ber: Jan 12 19:55:19 alien17 kernel: [ 510.670704] usb 1-1: dvb_frontend_ioctl: (73) Jan 12 19:55:20 alien17 kernel: [ 511.671042] usb 1-1: dvb_frontend_ioctl: (69) Jan 12 19:55:20 alien17 kernel: [ 511.671615] i2c i2c-9: m88ds3103_read_status: lock=0f status=00 Jan 12 19:55:20 alien17 kernel: [ 511.671619] usb 1-1: dvb_frontend_ioctl: (71) Jan 12 19:55:20 alien17 kernel: [ 511.674769] usb 1-1: dvb_frontend_ioctl: (72) Jan 12 19:55:20 alien17 kernel: [ 511.674772] i2c i2c-9: m88ds3103_read_snr: Jan 12 19:55:20 alien17 kernel: [ 511.677226] usb 1-1: dvb_frontend_ioctl: (70) Jan 12 19:55:20 alien17 kernel: [ 511.677229] i2c i2c-9: m88ds3103_read_ber: ... Jan 12 19:55:22 alien17 kernel: [ 513.695184] usb 1-1: dvb_frontend_ioctl: (73) Jan 12 19:55:23 alien17 kernel: [ 513.916342] i2c i2c-9: m88ds3103_read_status: lock=0f status=00 Jan 12 19:55:23 alien17 kernel: [ 513.916346] usb 1-1: dvb_frontend_add_event: Jan 12 19:55:23 alien17 kernel: [ 513.916349] usb 1-1: dvb_frontend_swzigzag_update_delay: Jan 12 19:55:23 alien17 kernel: [ 513.916351] usb 1-1: dvb_frontend_swzigzag_autotune: drift:0 inversion:0 auto_step:2 auto_sub_step:0 started_auto_step:1 Jan 12 19:55:23 alien17 kernel: [ 513.916354] i2c i2c-9: m88ds3103_set_frontend: delivery_system=6 modulation=9 frequency=1743000 symbol_rate=22000488 inversion=0 pilot=0 rolloff=0 Jan 12 19:55:23 alien17 kernel: [ 514.251859] i2c i2c-9: m88ds3103_set_frontend: target_mclk=144000 ts_clk=10000 divide_ratio=15 Jan 12 19:55:23 alien17 kernel: [ 514.260257] i2c i2c-9: m88ds3103_set_frontend: carrier offset=428 Jan 12 19:55:23 alien17 kernel: [ 514.695551] usb 1-1: dvb_frontend_ioctl: (69) Jan 12 19:55:23 alien17 kernel: [ 514.696144] i2c i2c-9: m88ds3103_read_status: lock=8f status=1f ... -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
