The omap4iss driver uses an interface that used to be provided
by OMAP4 but has now been removed and replaced with a WARN_ON(1)
statement, which likely broke the iss_csiphy code at runtime.
It also broke compiling the driver when CONFIG_ARCH_OMAP2PLUS
is set, which is implied by OMAP4:
drivers/staging/media/omap4iss/iss_csiphy.c: In function
'omap4iss_csiphy_config':
drivers/staging/media/omap4iss/iss_csiphy.c:167:2: error: implicit declaration
of function 'omap4_ctrl_pad_writel' [-Werror=implicit-function-declaration]
omap4_ctrl_pad_writel(cam_rx_ctrl,
In turn, this broke ARM allyesconfig builds. Replacing the
omap4_ctrl_pad_writel call with WARN_ON(1) won't make the
situation any worse than it already is, but fixes the build
problem.
Signed-off-by: Arnd Bergmann <a...@arndb.de>
Fixes: efde234674d9 ("ARM: OMAP4+: control: remove support for legacy pad
read/write")
---
diff --git a/drivers/staging/media/omap4iss/iss_csiphy.c
b/drivers/staging/media/omap4iss/iss_csiphy.c
index 7c3d55d811ef..24f56ed90ac3 100644
--- a/drivers/staging/media/omap4iss/iss_csiphy.c
+++ b/drivers/staging/media/omap4iss/iss_csiphy.c
@@ -140,9 +140,7 @@ int omap4iss_csiphy_config(struct iss_device *iss,
* - bit [18] : CSIPHY1 CTRLCLK enable
* - bit [17:16] : CSIPHY1 config: 00 d-phy, 01/10 ccp2
*/
- cam_rx_ctrl = omap4_ctrl_pad_readl(
- OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX);
-
+ cam_rx_ctrl = WARN_ON(1);
if (subdevs->interface == ISS_INTERFACE_CSI2A_PHY1) {
cam_rx_ctrl &= ~(OMAP4_CAMERARX_CSI21_LANEENABLE_MASK |
@@ -166,8 +164,7 @@ int omap4iss_csiphy_config(struct iss_device *iss,
cam_rx_ctrl |= OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK;
}
- omap4_ctrl_pad_writel(cam_rx_ctrl,
- OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX);
+ WARN_ON(1);
/* Reset used lane count */
csi2->phy->used_data_lanes = 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
