From: Hans Verkuil <hans.verk...@cisco.com>

The s_mbus_fmt video op is a duplicate of the pad op. Replace all uses
in sub-devices by the set_fmt() pad op.

Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
 drivers/media/i2c/adv7170.c              | 16 +++++++++++-----
 drivers/media/i2c/adv7175.c              | 16 +++++++++++-----
 drivers/media/i2c/cx25840/cx25840-core.c | 15 ++++++++++++---
 drivers/media/i2c/saa7115.c              | 16 +++++++++++++---
 drivers/media/i2c/saa717x.c              | 16 +++++++++++++---
 drivers/media/pci/cx18/cx18-av-core.c    | 16 +++++++++++++---
 drivers/media/usb/go7007/s2250-board.c   | 18 +++++++++++++++---
 7 files changed, 88 insertions(+), 25 deletions(-)

diff --git a/drivers/media/i2c/adv7170.c b/drivers/media/i2c/adv7170.c
index 58d0a3c..f0d3f5a 100644
--- a/drivers/media/i2c/adv7170.c
+++ b/drivers/media/i2c/adv7170.c
@@ -296,11 +296,16 @@ static int adv7170_get_fmt(struct v4l2_subdev *sd,
        return 0;
 }
 
-static int adv7170_s_fmt(struct v4l2_subdev *sd,
-                               struct v4l2_mbus_framefmt *mf)
+static int adv7170_set_fmt(struct v4l2_subdev *sd,
+               struct v4l2_subdev_pad_config *cfg,
+               struct v4l2_subdev_format *format)
 {
+       struct v4l2_mbus_framefmt *mf = &format->format;
        u8 val = adv7170_read(sd, 0x7);
-       int ret;
+       int ret = 0;
+
+       if (format->pad)
+               return -EINVAL;
 
        switch (mf->code) {
        case MEDIA_BUS_FMT_UYVY8_2X8:
@@ -317,7 +322,8 @@ static int adv7170_s_fmt(struct v4l2_subdev *sd,
                return -EINVAL;
        }
 
-       ret = adv7170_write(sd, 0x7, val);
+       if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+               ret = adv7170_write(sd, 0x7, val);
 
        return ret;
 }
@@ -327,12 +333,12 @@ static int adv7170_s_fmt(struct v4l2_subdev *sd,
 static const struct v4l2_subdev_video_ops adv7170_video_ops = {
        .s_std_output = adv7170_s_std_output,
        .s_routing = adv7170_s_routing,
-       .s_mbus_fmt = adv7170_s_fmt,
 };
 
 static const struct v4l2_subdev_pad_ops adv7170_pad_ops = {
        .enum_mbus_code = adv7170_enum_mbus_code,
        .get_fmt = adv7170_get_fmt,
+       .set_fmt = adv7170_set_fmt,
 };
 
 static const struct v4l2_subdev_ops adv7170_ops = {
diff --git a/drivers/media/i2c/adv7175.c b/drivers/media/i2c/adv7175.c
index f744345..321834b 100644
--- a/drivers/media/i2c/adv7175.c
+++ b/drivers/media/i2c/adv7175.c
@@ -334,11 +334,16 @@ static int adv7175_get_fmt(struct v4l2_subdev *sd,
        return 0;
 }
 
-static int adv7175_s_fmt(struct v4l2_subdev *sd,
-                               struct v4l2_mbus_framefmt *mf)
+static int adv7175_set_fmt(struct v4l2_subdev *sd,
+               struct v4l2_subdev_pad_config *cfg,
+               struct v4l2_subdev_format *format)
 {
+       struct v4l2_mbus_framefmt *mf = &format->format;
        u8 val = adv7175_read(sd, 0x7);
-       int ret;
+       int ret = 0;
+
+       if (format->pad)
+               return -EINVAL;
 
        switch (mf->code) {
        case MEDIA_BUS_FMT_UYVY8_2X8:
@@ -355,7 +360,8 @@ static int adv7175_s_fmt(struct v4l2_subdev *sd,
                return -EINVAL;
        }
 
-       ret = adv7175_write(sd, 0x7, val);
+       if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+               ret = adv7175_write(sd, 0x7, val);
 
        return ret;
 }
@@ -380,12 +386,12 @@ static const struct v4l2_subdev_core_ops adv7175_core_ops 
= {
 static const struct v4l2_subdev_video_ops adv7175_video_ops = {
        .s_std_output = adv7175_s_std_output,
        .s_routing = adv7175_s_routing,
-       .s_mbus_fmt = adv7175_s_fmt,
 };
 
 static const struct v4l2_subdev_pad_ops adv7175_pad_ops = {
        .enum_mbus_code = adv7175_enum_mbus_code,
        .get_fmt = adv7175_get_fmt,
+       .set_fmt = adv7175_set_fmt,
 };
 
 static const struct v4l2_subdev_ops adv7175_ops = {
diff --git a/drivers/media/i2c/cx25840/cx25840-core.c 
b/drivers/media/i2c/cx25840/cx25840-core.c
index bd49644..166ae31 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -1366,14 +1366,17 @@ static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
 
 /* ----------------------------------------------------------------------- */
 
-static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct 
v4l2_mbus_framefmt *fmt)
+static int cx25840_set_fmt(struct v4l2_subdev *sd,
+               struct v4l2_subdev_pad_config *cfg,
+               struct v4l2_subdev_format *format)
 {
+       struct v4l2_mbus_framefmt *fmt = &format->format;
        struct cx25840_state *state = to_state(sd);
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
        int is_50Hz = !(state->std & V4L2_STD_525_60);
 
-       if (fmt->code != MEDIA_BUS_FMT_FIXED)
+       if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED)
                return -EINVAL;
 
        fmt->field = V4L2_FIELD_INTERLACED;
@@ -1403,6 +1406,8 @@ static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, 
struct v4l2_mbus_framefmt
                                fmt->width, fmt->height);
                return -ERANGE;
        }
+       if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+               return 0;
 
        HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
        VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
@@ -5068,7 +5073,6 @@ static const struct v4l2_subdev_video_ops 
cx25840_video_ops = {
        .s_std = cx25840_s_std,
        .g_std = cx25840_g_std,
        .s_routing = cx25840_s_video_routing,
-       .s_mbus_fmt = cx25840_s_mbus_fmt,
        .s_stream = cx25840_s_stream,
        .g_input_status = cx25840_g_input_status,
 };
@@ -5080,12 +5084,17 @@ static const struct v4l2_subdev_vbi_ops cx25840_vbi_ops 
= {
        .g_sliced_fmt = cx25840_g_sliced_fmt,
 };
 
+static const struct v4l2_subdev_pad_ops cx25840_pad_ops = {
+       .set_fmt = cx25840_set_fmt,
+};
+
 static const struct v4l2_subdev_ops cx25840_ops = {
        .core = &cx25840_core_ops,
        .tuner = &cx25840_tuner_ops,
        .audio = &cx25840_audio_ops,
        .video = &cx25840_video_ops,
        .vbi = &cx25840_vbi_ops,
+       .pad = &cx25840_pad_ops,
        .ir = &cx25840_ir_ops,
 };
 
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index 7147c8b..0eae5f4 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -1170,12 +1170,18 @@ static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, 
struct v4l2_sliced_vbi_f
        return 0;
 }
 
-static int saa711x_s_mbus_fmt(struct v4l2_subdev *sd, struct 
v4l2_mbus_framefmt *fmt)
+static int saa711x_set_fmt(struct v4l2_subdev *sd,
+               struct v4l2_subdev_pad_config *cfg,
+               struct v4l2_subdev_format *format)
 {
-       if (fmt->code != MEDIA_BUS_FMT_FIXED)
+       struct v4l2_mbus_framefmt *fmt = &format->format;
+
+       if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED)
                return -EINVAL;
        fmt->field = V4L2_FIELD_INTERLACED;
        fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+       if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+               return 0;
        return saa711x_set_size(sd, fmt->width, fmt->height);
 }
 
@@ -1603,7 +1609,6 @@ static const struct v4l2_subdev_video_ops 
saa711x_video_ops = {
        .s_std = saa711x_s_std,
        .s_routing = saa711x_s_routing,
        .s_crystal_freq = saa711x_s_crystal_freq,
-       .s_mbus_fmt = saa711x_s_mbus_fmt,
        .s_stream = saa711x_s_stream,
        .querystd = saa711x_querystd,
        .g_input_status = saa711x_g_input_status,
@@ -1617,12 +1622,17 @@ static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops 
= {
        .s_raw_fmt = saa711x_s_raw_fmt,
 };
 
+static const struct v4l2_subdev_pad_ops saa711x_pad_ops = {
+       .set_fmt = saa711x_set_fmt,
+};
+
 static const struct v4l2_subdev_ops saa711x_ops = {
        .core = &saa711x_core_ops,
        .tuner = &saa711x_tuner_ops,
        .audio = &saa711x_audio_ops,
        .video = &saa711x_video_ops,
        .vbi = &saa711x_vbi_ops,
+       .pad = &saa711x_pad_ops,
 };
 
 #define CHIP_VER_SIZE  16
diff --git a/drivers/media/i2c/saa717x.c b/drivers/media/i2c/saa717x.c
index 0d0f9a9..3b2e240 100644
--- a/drivers/media/i2c/saa717x.c
+++ b/drivers/media/i2c/saa717x.c
@@ -992,13 +992,16 @@ static int saa717x_s_register(struct v4l2_subdev *sd, 
const struct v4l2_dbg_regi
 }
 #endif
 
-static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct 
v4l2_mbus_framefmt *fmt)
+static int saa717x_set_fmt(struct v4l2_subdev *sd,
+               struct v4l2_subdev_pad_config *cfg,
+               struct v4l2_subdev_format *format)
 {
+       struct v4l2_mbus_framefmt *fmt = &format->format;
        int prescale, h_scale, v_scale;
 
        v4l2_dbg(1, debug, sd, "decoder set size\n");
 
-       if (fmt->code != MEDIA_BUS_FMT_FIXED)
+       if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED)
                return -EINVAL;
 
        /* FIXME need better bounds checking here */
@@ -1010,6 +1013,9 @@ static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, 
struct v4l2_mbus_framefmt
        fmt->field = V4L2_FIELD_INTERLACED;
        fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
 
+       if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+               return 0;
+
        /* scaling setting */
        /* NTSC and interlace only */
        prescale = SAA717X_NTSC_WIDTH / fmt->width;
@@ -1217,7 +1223,6 @@ static const struct v4l2_subdev_tuner_ops 
saa717x_tuner_ops = {
 static const struct v4l2_subdev_video_ops saa717x_video_ops = {
        .s_std = saa717x_s_std,
        .s_routing = saa717x_s_video_routing,
-       .s_mbus_fmt = saa717x_s_mbus_fmt,
        .s_stream = saa717x_s_stream,
 };
 
@@ -1225,11 +1230,16 @@ static const struct v4l2_subdev_audio_ops 
saa717x_audio_ops = {
        .s_routing = saa717x_s_audio_routing,
 };
 
+static const struct v4l2_subdev_pad_ops saa717x_pad_ops = {
+       .set_fmt = saa717x_set_fmt,
+};
+
 static const struct v4l2_subdev_ops saa717x_ops = {
        .core = &saa717x_core_ops,
        .tuner = &saa717x_tuner_ops,
        .audio = &saa717x_audio_ops,
        .video = &saa717x_video_ops,
+       .pad = &saa717x_pad_ops,
 };
 
 /* ----------------------------------------------------------------------- */
diff --git a/drivers/media/pci/cx18/cx18-av-core.c 
b/drivers/media/pci/cx18/cx18-av-core.c
index 5a55630..30bbe8d 100644
--- a/drivers/media/pci/cx18/cx18-av-core.c
+++ b/drivers/media/pci/cx18/cx18-av-core.c
@@ -945,14 +945,17 @@ static int cx18_av_s_ctrl(struct v4l2_ctrl *ctrl)
        return 0;
 }
 
-static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct 
v4l2_mbus_framefmt *fmt)
+static int cx18_av_set_fmt(struct v4l2_subdev *sd,
+               struct v4l2_subdev_pad_config *cfg,
+               struct v4l2_subdev_format *format)
 {
+       struct v4l2_mbus_framefmt *fmt = &format->format;
        struct cx18_av_state *state = to_cx18_av_state(sd);
        struct cx18 *cx = v4l2_get_subdevdata(sd);
        int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
        int is_50Hz = !(state->std & V4L2_STD_525_60);
 
-       if (fmt->code != MEDIA_BUS_FMT_FIXED)
+       if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED)
                return -EINVAL;
 
        fmt->field = V4L2_FIELD_INTERLACED;
@@ -987,6 +990,9 @@ static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, 
struct v4l2_mbus_framefmt
                return -ERANGE;
        }
 
+       if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+               return 0;
+
        HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
        VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
        VSC &= 0x1fff;
@@ -1285,7 +1291,6 @@ static const struct v4l2_subdev_video_ops 
cx18_av_video_ops = {
        .s_std = cx18_av_s_std,
        .s_routing = cx18_av_s_video_routing,
        .s_stream = cx18_av_s_stream,
-       .s_mbus_fmt = cx18_av_s_mbus_fmt,
 };
 
 static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = {
@@ -1295,12 +1300,17 @@ static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops 
= {
        .s_raw_fmt = cx18_av_s_raw_fmt,
 };
 
+static const struct v4l2_subdev_pad_ops cx18_av_pad_ops = {
+       .set_fmt = cx18_av_set_fmt,
+};
+
 static const struct v4l2_subdev_ops cx18_av_ops = {
        .core = &cx18_av_general_ops,
        .tuner = &cx18_av_tuner_ops,
        .audio = &cx18_av_audio_ops,
        .video = &cx18_av_video_ops,
        .vbi = &cx18_av_vbi_ops,
+       .pad = &cx18_av_pad_ops,
 };
 
 int cx18_av_probe(struct cx18 *cx)
diff --git a/drivers/media/usb/go7007/s2250-board.c 
b/drivers/media/usb/go7007/s2250-board.c
index bb84668..5c2a495 100644
--- a/drivers/media/usb/go7007/s2250-board.c
+++ b/drivers/media/usb/go7007/s2250-board.c
@@ -405,12 +405,20 @@ static int s2250_s_ctrl(struct v4l2_ctrl *ctrl)
        return 0;
 }
 
-static int s2250_s_mbus_fmt(struct v4l2_subdev *sd,
-                       struct v4l2_mbus_framefmt *fmt)
+static int s2250_set_fmt(struct v4l2_subdev *sd,
+               struct v4l2_subdev_pad_config *cfg,
+               struct v4l2_subdev_format *format)
 {
+       struct v4l2_mbus_framefmt *fmt = &format->format;
        struct s2250 *state = to_state(sd);
        struct i2c_client *client = v4l2_get_subdevdata(sd);
 
+       if (format->pad)
+               return -EINVAL;
+
+       if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+               return 0;
+
        if (fmt->height < 640) {
                write_reg_fp(client, 0x12b, state->reg12b_val | 0x400);
                write_reg_fp(client, 0x140, 0x060);
@@ -479,13 +487,17 @@ static const struct v4l2_subdev_audio_ops s2250_audio_ops 
= {
 static const struct v4l2_subdev_video_ops s2250_video_ops = {
        .s_std = s2250_s_std,
        .s_routing = s2250_s_video_routing,
-       .s_mbus_fmt = s2250_s_mbus_fmt,
+};
+
+static const struct v4l2_subdev_pad_ops s2250_pad_ops = {
+       .set_fmt = s2250_set_fmt,
 };
 
 static const struct v4l2_subdev_ops s2250_ops = {
        .core = &s2250_core_ops,
        .audio = &s2250_audio_ops,
        .video = &s2250_video_ops,
+       .pad = &s2250_pad_ops,
 };
 
 /* --------------------------------------------------------------------------*/
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to