Hi, Laurent
On 4/12/2015 9:08 PM, Laurent Pinchart wrote:
Hi Josh,
Thank you for the patch.
On Thursday 09 April 2015 17:01:48 Josh Wu wrote:
The master clock should handled by sensor itself.
Signed-off-by: Josh Wu <josh...@atmel.com>
---
Changes in v2:
- totally remove clock_start()/clock_stop() as they are optional.
drivers/media/platform/soc_camera/atmel-isi.c | 45 ------------------------
1 file changed, 45 deletions(-)
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
b/drivers/media/platform/soc_camera/atmel-isi.c index 2b05f89..7bba7d9
100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -83,8 +83,6 @@ struct atmel_isi {
struct completion complete;
/* ISI peripherial clock */
struct clk *pclk;
- /* ISI_MCK, feed to camera sensor to generate pixel clock */
- struct clk *mck;
unsigned int irq;
struct isi_platform_data pdata;
@@ -727,31 +725,6 @@ static void isi_camera_remove_device(struct
soc_camera_device *icd) icd->devnum);
}
-/* Called with .host_lock held */
-static int isi_camera_clock_start(struct soc_camera_host *ici)
-{
- struct atmel_isi *isi = ici->priv;
- int ret;
-
- if (!IS_ERR(isi->mck)) {
- ret = clk_prepare_enable(isi->mck);
- if (ret) {
- return ret;
- }
- }
-
- return 0;
-}
-
-/* Called with .host_lock held */
-static void isi_camera_clock_stop(struct soc_camera_host *ici)
-{
- struct atmel_isi *isi = ici->priv;
-
- if (!IS_ERR(isi->mck))
- clk_disable_unprepare(isi->mck);
-}
-
static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
{
struct soc_camera_device *icd = file->private_data;
@@ -865,8 +838,6 @@ static struct soc_camera_host_ops
isi_soc_camera_host_ops = { .owner = THIS_MODULE,
.add = isi_camera_add_device,
.remove = isi_camera_remove_device,
- .clock_start = isi_camera_clock_start,
- .clock_stop = isi_camera_clock_stop,
.set_fmt = isi_camera_set_fmt,
.try_fmt = isi_camera_try_fmt,
.get_formats = isi_camera_get_formats,
@@ -904,7 +875,6 @@ static int atmel_isi_probe_dt(struct atmel_isi *isi,
/* Default settings for ISI */
isi->pdata.full_mode = 1;
- isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;
You can also remove the #define ISI_DEFAULT_MCLK_FREQ at the beginning of this
file.
I'll remove the useless definition.
With this fixed,
Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Thanks.
Best Regards,
Josh Wu
isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
np = of_graph_get_next_endpoint(np, NULL);
@@ -980,21 +950,6 @@ static int atmel_isi_probe(struct platform_device
*pdev) INIT_LIST_HEAD(&isi->video_buffer_list);
INIT_LIST_HEAD(&isi->dma_desc_head);
- /* ISI_MCK is the sensor master clock. It should be handled by the
- * sensor driver directly, as the ISI has no use for that clock. Make
- * the clock optional here while platforms transition to the correct
- * model.
- */
- isi->mck = devm_clk_get(dev, "isi_mck");
- if (!IS_ERR(isi->mck)) {
- /* Set ISI_MCK's frequency, it should be faster than pixel
- * clock.
- */
- ret = clk_set_rate(isi->mck, isi->pdata.mck_hz);
- if (ret < 0)
- return ret;
- }
-
isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
sizeof(struct fbd) * MAX_BUFFER_NUM,
&isi->fb_descriptors_phys,
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
