On 09/04/2015 01:14 AM, Sergei Shtylyov wrote:
> Commit cccb83f7a184 ([media] adv7180: add more subdev video ops) forgot to add
> the g_std() video method. Its implementation seems identical to the querystd()
> method, so we can just point at adv7180_querystd()...
>
> Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
>
> ---
> drivers/media/i2c/adv7180.c | 1 +
> 1 file changed, 1 insertion(+)
>
> Index: media_tree/drivers/media/i2c/adv7180.c
> ===================================================================
> --- media_tree.orig/drivers/media/i2c/adv7180.c
> +++ media_tree/drivers/media/i2c/adv7180.c
> @@ -717,6 +717,7 @@ static int adv7180_g_mbus_config(struct
> }
>
> static const struct v4l2_subdev_video_ops adv7180_video_ops = {
> + .g_std = adv7180_querystd,
No, this isn't right. Not your fault, the adv7180 driver is badly coded.
The adv7180 driver implements this 'autodetect' mode which is enabled
when s_std is called with V4L2_STD_ALL. This is illegal according to the
spec. Digging deeper shows that only the sta2x11_vip.c driver uses this
'feature':
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id std)
{
struct sta2x11_vip *vip = video_drvdata(file);
v4l2_std_id oldstd = vip->std, newstd;
int status;
if (V4L2_STD_ALL == std) {
v4l2_subdev_call(vip->decoder, video, s_std, std);
ssleep(2);
v4l2_subdev_call(vip->decoder, video, querystd, &newstd);
v4l2_subdev_call(vip->decoder, video, g_input_status, &status);
if (status & V4L2_IN_ST_NO_SIGNAL)
return -EIO;
std = vip->std = newstd;
if (oldstd != std) {
if (V4L2_STD_525_60 & std)
vip->format = formats_60[0];
else
vip->format = formats_50[0];
}
return 0;
}
if (oldstd != std) {
if (V4L2_STD_525_60 & std)
vip->format = formats_60[0];
else
vip->format = formats_50[0];
}
return v4l2_subdev_call(vip->decoder, video, s_std, std);
}
So it enables the autodetect, queries the standard and uses the resulting
standard.
It leaves the autodetect feature on as well which can be very dangerous
if it switches from NTSC to PAL since the buffer size increases in that
case, potentially leading to buffer overruns.
What you should do is to completely remove the autodetect feature from the
adv7180 driver, then change the code in sta2x11_vip.c to:
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id std)
{
struct sta2x11_vip *vip = video_drvdata(file);
int status;
int err;
if (V4L2_STD_ALL == std) {
/*
* Note: this behavior is out-of-spec! It's kept to preserve
* backwards compatibility.
*/
v4l2_subdev_call(vip->decoder, video, querystd, &std);
v4l2_subdev_call(vip->decoder, video, g_input_status, &status);
if (status & V4L2_IN_ST_NO_SIGNAL)
return -EIO;
}
if (vip->std == std)
return 0;
err = v4l2_subdev_call(vip->decoder, video, s_std, std);
if (err)
return err;
vip->std = std;
if (V4L2_STD_525_60 & std)
vip->format = formats_60[0];
else
vip->format = formats_50[0];
return 0;
}
For this code:
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
Note: I haven't compiled this code, and I can't test it either (no hardware).
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
