The preview path only can convert UYVY format to RGB data.
To make preview path work correctly, we need to set up YCC_SWAP
according to sensor output and convert them to UYVY.
Signed-off-by: Josh Wu <josh...@atmel.com>
---
Changes in v2:
- remove cfg2_yuv_swap for rgb format
- correct the comment style
drivers/media/platform/soc_camera/atmel-isi.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
b/drivers/media/platform/soc_camera/atmel-isi.c
index ae82068..826d04e 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -117,6 +117,20 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi,
case MEDIA_BUS_FMT_YVYU8_2X8:
return ISI_CFG2_YCC_SWAP_MODE_1;
}
+ } else if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_RGB565) {
+ /*
+ * Preview path is enabled, it will convert UYVY to RGB format.
+ * But if sensor output format is not UYVY, we need to set
+ * YCC_SWAP_MODE to convert it as UYVY.
+ */
+ switch (xlate->code) {
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ return ISI_CFG2_YCC_SWAP_MODE_1;
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ return ISI_CFG2_YCC_SWAP_MODE_2;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ return ISI_CFG2_YCC_SWAP_MODE_3;
+ }
}
/*
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
