From: Philipp Zabel <p.za...@pengutronix.de>
To allow optional interrupt support, we want to configure the pin settings
dynamically. Move those register accesses out of the static initialization
tables.
Signed-off-by: Philipp Zabel <p.za...@pengutronix.de>
Signed-off-by: Lucas Stach <l.st...@pengutronix.de>
---
drivers/media/i2c/tvp5150.c | 19 +++++++------------
drivers/media/i2c/tvp5150_reg.h | 1 +
2 files changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index d0b5e148dcd8..e0f5bc219ced 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -323,9 +323,6 @@ static const struct i2c_reg_value tvp5150_init_default[] = {
{ /* 0x0e */
TVP5150_LUMA_PROC_CTL_3,0x00
},
- { /* 0x0f */
- TVP5150_CONF_SHARED_PIN,0x08
- },
{ /* 0x11 */
TVP5150_ACT_VD_CROP_ST_MSB,0x00
},
@@ -362,9 +359,6 @@ static const struct i2c_reg_value tvp5150_init_default[] = {
{ /* 0x1d */
TVP5150_INT_ENABLE_REG_B,0x00
},
- { /* 0x1e */
- TVP5150_INTT_CONFIG_REG_B,0x00
- },
{ /* 0x28 */
TVP5150_VIDEO_STD,0x00
},
@@ -383,9 +377,6 @@ static const struct i2c_reg_value tvp5150_init_default[] = {
{ /* 0xc1 */
TVP5150_INT_ENABLE_REG_A,0x00
},
- { /* 0xc2 */
- TVP5150_INT_CONF,0x04
- },
{ /* 0xc8 */
TVP5150_FIFO_INT_THRESHOLD,0x80
},
@@ -420,9 +411,7 @@ static const struct i2c_reg_value tvp5150_init_default[] = {
/* Default values as sugested at TVP5150AM1 datasheet */
static const struct i2c_reg_value tvp5150_init_enable[] = {
- {
- TVP5150_CONF_SHARED_PIN, 2
- },{ /* Automatic offset and AGC enabled */
+ { /* Automatic offset and AGC enabled */
TVP5150_ANAL_CHL_CTL, 0x15
},{ /* Activate YCrCb output 0x9 or 0xd ? */
TVP5150_MISC_CTL, 0x6f
@@ -772,6 +761,12 @@ static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
/* Initializes TVP5150 to its default values */
tvp5150_write_inittab(sd, tvp5150_init_default);
+ /* Configure pins: FID, VSYNC, GPCL/VBLK, SCLK */
+ regmap_write(map, TVP5150_CONF_SHARED_PIN, 0x2);
+ /* Keep interrupt polarity active low */
+ regmap_write(map, TVP5150_INT_CONF, TVP5150_VDPOE);
+ regmap_write(map, TVP5150_INTT_CONFIG_REG_B, 0x0);
+
/* Initializes VDP registers */
tvp5150_vdp_init(sd, vbi_ram_default);
diff --git a/drivers/media/i2c/tvp5150_reg.h b/drivers/media/i2c/tvp5150_reg.h
index 25a994944918..fc3bcb26413a 100644
--- a/drivers/media/i2c/tvp5150_reg.h
+++ b/drivers/media/i2c/tvp5150_reg.h
@@ -117,6 +117,7 @@
#define TVP5150_INT_STATUS_REG_A 0xc0 /* Interrupt status register A */
#define TVP5150_INT_ENABLE_REG_A 0xc1 /* Interrupt enable register A */
#define TVP5150_INT_CONF 0xc2 /* Interrupt configuration */
+#define TVP5150_VDPOE BIT(2)
#define TVP5150_VDP_CONF_RAM_DATA 0xc3 /* VDP configuration RAM data */
#define TVP5150_CONF_RAM_ADDR_LOW 0xc4 /* Configuration RAM address low byte
*/
#define TVP5150_CONF_RAM_ADDR_HIGH 0xc5 /* Configuration RAM address high
byte */
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
