Hi Mauro,
You said the following to Budi Rachmanto:
> No, you should not add your credits here. You're just adding some new board
> definitions, not rewriting a significant amount of the driver. The credits
> of your work will be preserved via the git log. A gold rule we use in
> Kernel when adding credits info is when the changes touch more than 30% of
> the driver's code.
I did not know the above rule to add a credit.
I also added my credits to the below patch I sent about one month ago
though I should have not added them because I did not change much enough to 30%.
To remove my credits, do I need just to re-post another patch without my credits
or to revert my previous patch and re-post the new one?
Please advise.
Thanks,
Satoshi
On 2016/03/08 23:19, Satoshi Nagahama wrote:
> Hi Mauro, Akihiro,
>
> I added em28xx_dvb to support for PLEX PX-BCUD (ISDB-S usb dongle).
> Please move forward with this patch if there is no problem.
> Or something wrong, please advise me what I should do.
>
> PX-BCUD has the following components:
> USB interface: Empia EM28178
> Demodulator: Toshiba TC90532 (works by code for TC90522)
> Tuner: Next version of Sharp QM1D1C0042
>
> em28xx_dvb_init(), add init code for PLEX PX-BCUD with calling
> px_bcud_init() that does things like pin configuration.
>
> qm1d1c0042_init(), support the next version of QM1D1C0042, change to
> choose an appropriate array of initial registers by reading chip id.
>
>
> Signed-off-by: Satoshi Nagahama <satt...@aim.com>
> ---
> drivers/media/tuners/qm1d1c0042.c | 35 +++++++---
> drivers/media/usb/em28xx/Kconfig | 2 +
> drivers/media/usb/em28xx/em28xx-cards.c | 27 ++++++++
> drivers/media/usb/em28xx/em28xx-dvb.c | 117
> ++++++++++++++++++++++++++++++++
> drivers/media/usb/em28xx/em28xx.h | 1 +
> 5 files changed, 171 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/tuners/qm1d1c0042.c
> b/drivers/media/tuners/qm1d1c0042.c
> index 18bc745..8fd91a2 100644
> --- a/drivers/media/tuners/qm1d1c0042.c
> +++ b/drivers/media/tuners/qm1d1c0042.c
> @@ -2,6 +2,7 @@
> * Sharp QM1D1C0042 8PSK tuner driver
> *
> * Copyright (C) 2014 Akihiro Tsukada <tsk...@gmail.com>
> + * Copyright (C) 2016 Satoshi Nagahama <satt...@aim.com>
> *
> * This program is free software; you can redistribute it and/or
> * modify it under the terms of the GNU General Public License as
> @@ -32,14 +33,23 @@
> #include "qm1d1c0042.h"
>
> #define QM1D1C0042_NUM_REGS 0x20
> -
> -static const u8 reg_initval[QM1D1C0042_NUM_REGS] = {
> - 0x48, 0x1c, 0xa0, 0x10, 0xbc, 0xc5, 0x20, 0x33,
> - 0x06, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
> - 0x00, 0xff, 0xf3, 0x00, 0x2a, 0x64, 0xa6, 0x86,
> - 0x8c, 0xcf, 0xb8, 0xf1, 0xa8, 0xf2, 0x89, 0x00
> +#define QM1D1C0042_NUM_REG_ROWS 2
> +
> +static const u8 reg_initval[QM1D1C0042_NUM_REG_ROWS][QM1D1C0042_NUM_REGS] =
> { {
> + 0x48, 0x1c, 0xa0, 0x10, 0xbc, 0xc5, 0x20, 0x33,
> + 0x06, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
> + 0x00, 0xff, 0xf3, 0x00, 0x2a, 0x64, 0xa6, 0x86,
> + 0x8c, 0xcf, 0xb8, 0xf1, 0xa8, 0xf2, 0x89, 0x00
> + }, {
> + 0x68, 0x1c, 0xc0, 0x10, 0xbc, 0xc1, 0x11, 0x33,
> + 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
> + 0x00, 0xff, 0xf3, 0x00, 0x3f, 0x25, 0x5c, 0xd6,
> + 0x55, 0xcf, 0x95, 0xf6, 0x36, 0xf2, 0x09, 0x00
> + }
> };
>
> +static int reg_index;
> +
> static const struct qm1d1c0042_config default_cfg = {
> .xtal_freq = 16000,
> .lpf = 1,
> @@ -320,7 +330,6 @@ static int qm1d1c0042_init(struct dvb_frontend *fe)
> int i, ret;
>
> state = fe->tuner_priv;
> - memcpy(state->regs, reg_initval, sizeof(reg_initval));
>
> reg_write(state, 0x01, 0x0c);
> reg_write(state, 0x01, 0x0c);
> @@ -330,15 +339,19 @@ static int qm1d1c0042_init(struct dvb_frontend *fe)
> goto failed;
> usleep_range(2000, 3000);
>
> - val = state->regs[0x01] | 0x10;
> - ret = reg_write(state, 0x01, val); /* soft reset off */
> + ret = reg_write(state, 0x01, 0x1c); /* soft reset off */
> if (ret < 0)
> goto failed;
>
> - /* check ID */
> + /* check ID and choose initial registers corresponding ID */
> ret = reg_read(state, 0x00, &val);
> - if (ret < 0 || val != 0x48)
> + if (ret < 0)
> + goto failed;
> + for (reg_index = 0; reg_index < QM1D1C0042_NUM_REG_ROWS; reg_index++)
> + if (val == reg_initval[reg_index][0x00]) break;
> + if (reg_index >= QM1D1C0042_NUM_REG_ROWS)
> goto failed;
> + memcpy(state->regs, reg_initval[reg_index], QM1D1C0042_NUM_REGS);
> usleep_range(2000, 3000);
>
> state->regs[0x0c] |= 0x40;
> diff --git a/drivers/media/usb/em28xx/Kconfig
> b/drivers/media/usb/em28xx/Kconfig
> index e382210..d917b0a 100644
> --- a/drivers/media/usb/em28xx/Kconfig
> +++ b/drivers/media/usb/em28xx/Kconfig
> @@ -59,6 +59,8 @@ config VIDEO_EM28XX_DVB
> select DVB_DRX39XYJ if MEDIA_SUBDRV_AUTOSELECT
> select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
> + select DVB_TC90522 if MEDIA_SUBDRV_AUTOSELECT
> + select MEDIA_TUNER_QM1D1C0042 if MEDIA_SUBDRV_AUTOSELECT
> ---help---
> This adds support for DVB cards based on the
> Empiatech em28xx chips.
> diff --git a/drivers/media/usb/em28xx/em28xx-cards.c
> b/drivers/media/usb/em28xx/em28xx-cards.c
> index 930e3e3..772a8f8 100644
> --- a/drivers/media/usb/em28xx/em28xx-cards.c
> +++ b/drivers/media/usb/em28xx/em28xx-cards.c
> @@ -492,6 +492,20 @@ static struct em28xx_reg_seq terratec_t2_stick_hd[] = {
> {-1, -1, -1, -1},
> };
>
> +static struct em28xx_reg_seq plex_px_bcud[] = {
> + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
> + {0x0d, 0xff, 0xff, 0},
> + {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
> + {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0},
> + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100},
> + {EM28XX_R12_VINENABLE, 0x20, 0x20, 0},
> + {0x0d, 0x42, 0xff, 1000},
> + {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
> + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
> + {0x73, 0xfd, 0xff, 100},
> + {-1, -1, -1, -1},
> +};
> +
> /*
> * Button definitions
> */
> @@ -2306,6 +2320,17 @@ struct em28xx_board em28xx_boards[] = {
> .has_dvb = 1,
> .ir_codes = RC_MAP_TERRATEC_SLIM_2,
> },
> + /* 3275:0085 PLEX PX-BCUD.
> + * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 */
> + [EM28178_BOARD_PLEX_PX_BCUD] = {
> + .name = "PLEX PX-BCUD",
> + .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ,
> + .def_i2c_bus = 1,
> + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
> + .tuner_type = TUNER_ABSENT,
> + .tuner_gpio = plex_px_bcud,
> + .has_dvb = 1,
> + },
> };
> EXPORT_SYMBOL_GPL(em28xx_boards);
>
> @@ -2495,6 +2520,8 @@ struct usb_device_id em28xx_id_table[] = {
> .driver_info = EM2861_BOARD_LEADTEK_VC100 },
> { USB_DEVICE(0xeb1a, 0x8179),
> .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
> + { USB_DEVICE(0x3275, 0x0085),
> + .driver_info = EM28178_BOARD_PLEX_PX_BCUD },
> { },
> };
> MODULE_DEVICE_TABLE(usb, em28xx_id_table);
> diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c
> b/drivers/media/usb/em28xx/em28xx-dvb.c
> index 5d209c7..5fa25bf 100644
> --- a/drivers/media/usb/em28xx/em28xx-dvb.c
> +++ b/drivers/media/usb/em28xx/em28xx-dvb.c
> @@ -12,6 +12,8 @@
>
> (c) 2012 Frank Schafer <fschaefer....@googlemail.com>
>
> + (c) 2016 Satoshi Nagahama <satt...@aim.com>
> +
> Based on cx88-dvb, saa7134-dvb and videobuf-dvb originally written by:
> (c) 2004, 2005 Chris Pascoe <c.pas...@itee.uq.edu.au>
> (c) 2004 Gerd Knorr <kra...@bytesex.org> [SuSE Labs]
> @@ -58,6 +60,8 @@
> #include "ts2020.h"
> #include "si2168.h"
> #include "si2157.h"
> +#include "tc90522.h"
> +#include "qm1d1c0042.h"
>
> MODULE_AUTHOR("Mauro Carvalho Chehab <mche...@infradead.org>");
> MODULE_LICENSE("GPL");
> @@ -787,6 +791,65 @@ static int em28xx_mt352_terratec_xs_init(struct
> dvb_frontend *fe)
> return 0;
> }
>
> +static void px_bcud_init(struct em28xx *dev)
> +{
> + int i;
> + struct {
> + unsigned char r[4];
> + int len;
> + } regs1[] = {
> + {{ 0x0e, 0x77 }, 2},
> + {{ 0x0f, 0x77 }, 2},
> + {{ 0x03, 0x90 }, 2},
> + }, regs2[] = {
> + {{ 0x07, 0x01 }, 2},
> + {{ 0x08, 0x10 }, 2},
> + {{ 0x13, 0x00 }, 2},
> + {{ 0x17, 0x00 }, 2},
> + {{ 0x03, 0x01 }, 2},
> + {{ 0x10, 0xb1 }, 2},
> + {{ 0x11, 0x40 }, 2},
> + {{ 0x85, 0x7a }, 2},
> + {{ 0x87, 0x04 }, 2},
> + };
> + static struct em28xx_reg_seq gpio[] = {
> + {EM28XX_R06_I2C_CLK, 0x40, 0xff, 300},
> + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 60},
> + {EM28XX_R15_RGAIN, 0x20, 0xff, 0},
> + {EM28XX_R16_GGAIN, 0x20, 0xff, 0},
> + {EM28XX_R17_BGAIN, 0x20, 0xff, 0},
> + {EM28XX_R18_ROFFSET, 0x00, 0xff, 0},
> + {EM28XX_R19_GOFFSET, 0x00, 0xff, 0},
> + {EM28XX_R1A_BOFFSET, 0x00, 0xff, 0},
> + {EM28XX_R23_UOFFSET, 0x00, 0xff, 0},
> + {EM28XX_R24_VOFFSET, 0x00, 0xff, 0},
> + {EM28XX_R26_COMPR, 0x00, 0xff, 0},
> + {0x13, 0x08, 0xff, 0},
> + {EM28XX_R12_VINENABLE, 0x27, 0xff, 0},
> + {EM28XX_R0C_USBSUSP, 0x10, 0xff, 0},
> + {EM28XX_R27_OUTFMT, 0x00, 0xff, 0},
> + {EM28XX_R10_VINMODE, 0x00, 0xff, 0},
> + {EM28XX_R11_VINCTRL, 0x11, 0xff, 0},
> + {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
> + {EM2874_R5F_TS_ENABLE, 0x80, 0xff, 0},
> + {EM28XX_R06_I2C_CLK, 0x46, 0xff, 0},
> + };
> + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x46);
> + /* sleeping ISDB-T */
> + dev->dvb->i2c_client_demod->addr = 0x14;
> + for (i = 0; i < ARRAY_SIZE(regs1); i++)
> + i2c_master_send(dev->dvb->i2c_client_demod, regs1[i].r,
> regs1[i].len);
> + /* sleeping ISDB-S */
> + dev->dvb->i2c_client_demod->addr = 0x15;
> + for (i = 0; i < ARRAY_SIZE(regs2); i++)
> + i2c_master_send(dev->dvb->i2c_client_demod, regs2[i].r,
> regs2[i].len);
> + for (i = 0; i < ARRAY_SIZE(gpio); i++) {
> + em28xx_write_reg_bits(dev, gpio[i].reg, gpio[i].val,
> gpio[i].mask);
> + if (gpio[i].sleep > 0)
> + msleep(gpio[i].sleep);
> + }
> +};
> +
> static struct mt352_config terratec_xs_mt352_cfg = {
> .demod_address = (0x1e >> 1),
> .no_tuner = 1,
> @@ -1762,6 +1825,60 @@ static int em28xx_dvb_init(struct em28xx *dev)
> dvb->i2c_client_tuner = client;
> }
> break;
> + case EM28178_BOARD_PLEX_PX_BCUD:
> + {
> + struct i2c_client *client;
> + struct i2c_board_info info;
> + struct tc90522_config tc90522_config;
> + struct qm1d1c0042_config qm1d1c0042_config;
> +
> + /* attach demod */
> + memset(&tc90522_config, 0 ,sizeof(tc90522_config));
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "tc90522sat", I2C_NAME_SIZE);
> + info.addr = 0x15;
> + info.platform_data = &tc90522_config;
> + request_module("tc90522");
> + client =
> i2c_new_device(&dev->i2c_adap[dev->def_i2c_bus], &info);
> + if (client == NULL || client->dev.driver == NULL) {
> + result = -ENODEV;
> + goto out_free;
> + }
> + dvb->i2c_client_demod = client;
> + if (!try_module_get(client->dev.driver->owner)) {
> + i2c_unregister_device(client);
> + result = -ENODEV;
> + goto out_free;
> + }
> +
> + /* attach tuner */
> + memset(&qm1d1c0042_config, 0
> ,sizeof(qm1d1c0042_config));
> + qm1d1c0042_config.fe = tc90522_config.fe;
> + qm1d1c0042_config.lpf = 1;
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "qm1d1c0042", I2C_NAME_SIZE);
> + info.addr = 0x61;
> + info.platform_data = &qm1d1c0042_config;
> + request_module(info.type);
> + client =
> i2c_new_device(tc90522_config.tuner_i2c, &info);
> + if (client == NULL || client->dev.driver == NULL) {
> +
> module_put(dvb->i2c_client_demod->dev.driver->owner);
> + i2c_unregister_device(dvb->i2c_client_demod);
> + result = -ENODEV;
> + goto out_free;
> + }
> + dvb->i2c_client_tuner = client;
> + if (!try_module_get(client->dev.driver->owner)) {
> + i2c_unregister_device(client);
> +
> module_put(dvb->i2c_client_demod->dev.driver->owner);
> + i2c_unregister_device(dvb->i2c_client_demod);
> + result = -ENODEV;
> + goto out_free;
> + }
> + dvb->fe[0] = tc90522_config.fe;
> + px_bcud_init(dev);
> + }
> + break;
> default:
> em28xx_errdev("/2: The frontend of your DVB/ATSC card"
> " isn't supported yet\n");
> diff --git a/drivers/media/usb/em28xx/em28xx.h
> b/drivers/media/usb/em28xx/em28xx.h
> index 2674449..9ad1240 100644
> --- a/drivers/media/usb/em28xx/em28xx.h
> +++ b/drivers/media/usb/em28xx/em28xx.h
> @@ -145,6 +145,7 @@
> #define EM2861_BOARD_LEADTEK_VC100 95
> #define EM28178_BOARD_TERRATEC_T2_STICK_HD 96
> #define EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 97
> +#define EM28178_BOARD_PLEX_PX_BCUD 98
>
> /* Limits minimum and default number of buffers */
> #define EM28XX_MIN_BUF 4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
