Hello, This is a second version of an RFC patch series that adds MC input connector support to the tvp5150 driver. The first RFC version was [0].
The patches are RFC because a previous version was merged and later reverted since the approach was found to be inadequate. So I preferred to post this approach as RFC to discuss it first. The main difference with v1 is that a single sink pad is used for the tvp5150 (instead of using a pad per each input pin) as suggested by Mauro and Hans. The mc_nextgen_test dot output after applying the series can be found at [1] and the graph png generated using the dot tool is at [2]. I tested these patches on an IGEPv2 by capturing using both Composite inputs. [0]: https://www.mail-archive.com/linux-media@vger.kernel.org/msg95389.html [1]: http://hastebin.com/yiduhonome.tex [2]: http://i.imgur.com/EyFtVtJ.png?1 Best regards, Javier Changes in v2: - Remove from the changelog a mention of devices that multiplex the physical RCA connectors to be used for the S-Video Y and C signals since it's a special case and it doesn't really work on the IGEPv2. - Use a single sink pad for the demod and map the connectors as entities so the mux is made via links. Suggested by Mauro and Hans. Javier Martinez Canillas (2): [media] tvp5150: Add input connectors DT bindings [media] tvp5150: Replace connector support according to DT binding .../devicetree/bindings/media/i2c/tvp5150.txt | 59 ++++++++ drivers/media/i2c/tvp5150.c | 155 +++++++++++++++------ 2 files changed, 170 insertions(+), 44 deletions(-) -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
