The patch titled
sdio: add MMC_QUIRK_LENIENT_FN0
has been added to the -mm tree. Its filename is
sdio-add-mmc_quirk_lenient_fn0.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: sdio: add MMC_QUIRK_LENIENT_FN0
From: Ohad Ben-Cohen <[email protected]>
Normally writes to SDIO function 0 outside the vendor specific CCCR
registers are prohibited.
To support embedded devices that require writes to SDIO function 0 outside
this range (e.g. TI WL127x embedded sdio wifi device),
MMC_QUIRK_LENIENT_FN0 is introduced.
A card quirks field is added to `struct mmc_card' to support non-standard
devices (e.g. embedded sdio devices).
Signed-off-by: Ohad Ben-Cohen <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/mmc/core/sdio_io.c | 2 +-
include/linux/mmc/card.h | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff -puN drivers/mmc/core/sdio_io.c~sdio-add-mmc_quirk_lenient_fn0
drivers/mmc/core/sdio_io.c
--- a/drivers/mmc/core/sdio_io.c~sdio-add-mmc_quirk_lenient_fn0
+++ a/drivers/mmc/core/sdio_io.c
@@ -624,7 +624,7 @@ void sdio_f0_writeb(struct sdio_func *fu
BUG_ON(!func);
- if (addr < 0xF0 || addr > 0xFF) {
+ if ((addr < 0xF0 || addr > 0xFF) &&
(!mmc_card_lenient_fn0(func->card))) {
if (err_ret)
*err_ret = -EINVAL;
return;
diff -puN include/linux/mmc/card.h~sdio-add-mmc_quirk_lenient_fn0
include/linux/mmc/card.h
--- a/include/linux/mmc/card.h~sdio-add-mmc_quirk_lenient_fn0
+++ a/include/linux/mmc/card.h
@@ -97,6 +97,8 @@ struct mmc_card {
#define MMC_STATE_READONLY (1<<1) /* card is read-only */
#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
+ unsigned int quirks; /* card quirks */
+#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes
outside of the VS CCCR range */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
@@ -132,6 +134,8 @@ struct mmc_card {
#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
+#define mmc_card_lenient_fn0(c) ((c)->quirks & MMC_QUIRK_LENIENT_FN0)
+
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
_
Patches currently in -mm which might be from [email protected] are
sdio-add-cd-disable-support.patch
sdio-add-cd-disable-support-cleanup.patch
sdio-add-mmc_quirk_lenient_fn0.patch
sdio-add-mmc_quirk_lenient_fn0-fix.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
