The patch titled
mmc_spi: fail gracefully if host or card do not support the switch command
has been added to the -mm tree. Its filename is
mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: mmc_spi: fail gracefully if host or card do not support the switch
command
From: Wolfgang Muees <[email protected]>
Some time ago, I have send a patch to the mmc_spi subsystem changing the
error codes. This was after a discussion with Pierre about using EINVAL
only for non-recoverable errors. This patch was accepted as
http://git.kernel.org/linus/fdd858db7113ca64132de390188d7ca00701013d
Unfortunately, several weeks later, I realized that this patch has opened
a little can of worms because there are SD cards on the market which
a) claim that they support the switch command
AND
b) refuse to execute this command if operating in SPI mode.
So, such a card would get unusuable in an embedded linux system in SPI
mode, because the init sequence terminates with an error.
This patch adds the missing error codes to the caller of the switch
command and restores the old behaviour to fail gracefully if these
commands can not execute.
Signed-off-by: Wolfgang Muees <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]> [2.6.31.x]
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/mmc/core/mmc.c | 10 +++++-----
drivers/mmc/core/sd.c | 10 +++++-----
2 files changed, 10 insertions(+), 10 deletions(-)
diff -puN
drivers/mmc/core/mmc.c~mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command
drivers/mmc/core/mmc.c
---
a/drivers/mmc/core/mmc.c~mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command
+++ a/drivers/mmc/core/mmc.c
@@ -179,11 +179,11 @@ static int mmc_read_ext_csd(struct mmc_c
err = mmc_send_ext_csd(card, ext_csd);
if (err) {
- /*
- * We all hosts that cannot perform the command
- * to fail more gracefully
- */
- if (err != -EINVAL)
+ /* If the host or the card can't do the switch,
+ * fail more gracefully. */
+ if ((err != -EINVAL)
+ && (err != -ENOSYS)
+ && (err != -EFAULT))
goto out;
/*
diff -puN
drivers/mmc/core/sd.c~mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command
drivers/mmc/core/sd.c
---
a/drivers/mmc/core/sd.c~mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command
+++ a/drivers/mmc/core/sd.c
@@ -210,11 +210,11 @@ static int mmc_read_switch(struct mmc_ca
err = mmc_sd_switch(card, 0, 0, 1, status);
if (err) {
- /*
- * We all hosts that cannot perform the command
- * to fail more gracefully
- */
- if (err != -EINVAL)
+ /* If the host or the card can't do the switch,
+ * fail more gracefully. */
+ if ((err != -EINVAL)
+ && (err != -ENOSYS)
+ && (err != -EFAULT))
goto out;
printk(KERN_WARNING "%s: problem reading switch "
_
Patches currently in -mm which might be from [email protected] are
mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
