The patch titled
s3cmci: fix direct write to interrupt mask
has been removed from the -mm tree. Its filename was
s3cmci-fix-direct-write-to-interrupt-mask.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: s3cmci: fix direct write to interrupt mask
From: Ben Dooks <[email protected]>
The clear_imask() call should be used to clear the interrupt mask
register, as it may end up clearing the SDIO interrupt bit if this is
enabled.
Change all writes of zero to SDIIMSK register to use clear_imask() ready
for the SDIO updates.
Signed-off-by: Ben Dooks <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/mmc/host/s3cmci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff -puN drivers/mmc/host/s3cmci.c~s3cmci-fix-direct-write-to-interrupt-mask
drivers/mmc/host/s3cmci.c
--- a/drivers/mmc/host/s3cmci.c~s3cmci-fix-direct-write-to-interrupt-mask
+++ a/drivers/mmc/host/s3cmci.c
@@ -681,9 +681,9 @@ out:
fail_request:
host->mrq->data->error = -EINVAL;
host->complete_what = COMPLETION_FINALIZE;
- writel(0, host->base + host->sdiimsk);
- goto out;
+ clear_imask(host);
+ goto out;
}
static void finalize_request(struct s3cmci_host *host)
@@ -726,7 +726,7 @@ static void finalize_request(struct s3cm
writel(0, host->base + S3C2410_SDICMDARG);
writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
writel(0, host->base + S3C2410_SDICMDCON);
- writel(0, host->base + host->sdiimsk);
+ clear_imask(host);
if (cmd->data && cmd->error)
cmd->data->error = cmd->error;
_
Patches currently in -mm which might be from [email protected] are
gpiolib-add-names-file-in-gpio-chip-sysfs.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
