ping.
On Thu, Nov 26, 2009 at 12:10:13PM +0100, Daniel Mack wrote: > On platforms where the vmmc regulator is used, it might still be > necessary to call the platform data's setpower() callback in order to > drive GPIOs to power up hardware. > > I can't see any pxamci user with power regulators enabled, hence this > shouldn't break anything. > > Signed-off-by: Daniel Mack <[email protected]> > Cc: Pierre Ossman <[email protected]> > Cc: Eric Miao <[email protected]> > Cc: [email protected] > --- > drivers/mmc/host/pxamci.c | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c > index b00d673..c35df2b 100644 > --- a/drivers/mmc/host/pxamci.c > +++ b/drivers/mmc/host/pxamci.c > @@ -84,7 +84,7 @@ static inline void pxamci_init_ocr(struct pxamci_host *host) > host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc); > if (host->pdata && host->pdata->ocr_mask) > dev_warn(mmc_dev(host->mmc), > - "ocr_mask/setpower will not be used\n"); > + "given ocr_mask will not be used\n"); > } > #endif > if (host->vcc == NULL) { > @@ -109,7 +109,7 @@ static inline void pxamci_set_power(struct pxamci_host > *host, unsigned int vdd) > gpio_set_value(host->pdata->gpio_power, > !!on ^ host->pdata->gpio_power_invert); > } > - if (!host->vcc && host->pdata && host->pdata->setpower) > + if (host->pdata && host->pdata->setpower) > host->pdata->setpower(mmc_dev(host->mmc), vdd); > } > > -- > 1.6.5.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
