The patch titled
sdhci: add support for the SysKonnect CardBus2SDIO adapter
has been removed from the -mm tree. Its filename was
sdhci-add-support-for-the-syskonnect-cardbus2sdio-adapter.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: sdhci: add support for the SysKonnect CardBus2SDIO adapter
From: Nicolas Pitre <[email protected]>
This is still in use especially to develop SDIO device drivers on laptop
machines which are lacking SDIO slots. This adapter supports SDIO cards
only due to lack of 136-bit response capability.
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/mmc/host/sdhci-pci.c | 75 +++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff -puN
drivers/mmc/host/sdhci-pci.c~sdhci-add-support-for-the-syskonnect-cardbus2sdio-adapter
drivers/mmc/host/sdhci-pci.c
---
a/drivers/mmc/host/sdhci-pci.c~sdhci-add-support-for-the-syskonnect-cardbus2sdio-adapter
+++ a/drivers/mmc/host/sdhci-pci.c
@@ -285,6 +285,73 @@ static const struct sdhci_pci_fixes sdhc
.resume = jmicron_resume,
};
+/* SysKonnect CardBus2SDIO extra registers */
+#define SYSKT_CTRL 0x200
+#define SYSKT_RDFIFO_STAT 0x204
+#define SYSKT_WRFIFO_STAT 0x208
+#define SYSKT_POWER_DATA 0x20c
+#define SYSKT_POWER_330 0xef
+#define SYSKT_POWER_300 0xf8
+#define SYSKT_POWER_184 0xcc
+#define SYSKT_POWER_CMD 0x20d
+#define SYSKT_POWER_START (1 << 7)
+#define SYSKT_POWER_STATUS 0x20e
+#define SYSKT_POWER_STATUS_OK (1 << 0)
+#define SYSKT_BOARD_REV 0x210
+#define SYSKT_CHIP_REV 0x211
+#define SYSKT_CONF_DATA 0x212
+#define SYSKT_CONF_DATA_1V8 (1 << 2)
+#define SYSKT_CONF_DATA_2V5 (1 << 1)
+#define SYSKT_CONF_DATA_3V3 (1 << 0)
+
+static int syskt_probe(struct sdhci_pci_chip *chip)
+{
+ if ((chip->pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
+ chip->pdev->class &= ~0x0000FF;
+ chip->pdev->class |= PCI_SDHCI_IFDMA;
+ }
+ return 0;
+}
+
+static int syskt_probe_slot(struct sdhci_pci_slot *slot)
+{
+ int tm, ps;
+
+ u8 board_rev = readb(slot->host->ioaddr + SYSKT_BOARD_REV);
+ u8 chip_rev = readb(slot->host->ioaddr + SYSKT_CHIP_REV);
+ dev_info(&slot->chip->pdev->dev, "SysKonnect CardBus2SDIO, "
+ "board rev %d.%d, chip rev %d.%d\n",
+ board_rev >> 4, board_rev & 0xf,
+ chip_rev >> 4, chip_rev & 0xf);
+ if (chip_rev >= 0x20)
+ slot->host->quirks |= SDHCI_QUIRK_FORCE_DMA;
+
+ writeb(SYSKT_POWER_330, slot->host->ioaddr + SYSKT_POWER_DATA);
+ writeb(SYSKT_POWER_START, slot->host->ioaddr + SYSKT_POWER_CMD);
+ udelay(50);
+ tm = 10; /* Wait max 1 ms */
+ do {
+ ps = readw(slot->host->ioaddr + SYSKT_POWER_STATUS);
+ if (ps & SYSKT_POWER_STATUS_OK)
+ break;
+ udelay(100);
+ } while (--tm);
+ if (!tm) {
+ dev_err(&slot->chip->pdev->dev,
+ "power regulator never stabilized");
+ writeb(0, slot->host->ioaddr + SYSKT_POWER_CMD);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_syskt = {
+ .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER,
+ .probe = syskt_probe,
+ .probe_slot = syskt_probe_slot,
+};
+
static int via_probe(struct sdhci_pci_chip *chip)
{
if (chip->pdev->revision == 0x10)
@@ -363,6 +430,14 @@ static const struct pci_device_id pci_id
},
{
+ .vendor = PCI_VENDOR_ID_SYSKONNECT,
+ .device = 0x8000,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_syskt,
+ },
+
+ {
.vendor = PCI_VENDOR_ID_VIA,
.device = 0x95d0,
.subvendor = PCI_ANY_ID,
_
Patches currently in -mm which might be from [email protected] are
origin.patch
linux-next.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
