> -----Original Message-----
> From: Adrian Hunter [mailto:[email protected]]
> Sent: Saturday, January 16, 2010 7:33 PM
> To: Tony Lindgren
> Cc: Adrian Hunter; Madhusudhan Chikkature; Paul Walmsley; linux-omap
> Mailing List; linux-mmc Mailing List; Andrew Morton
> Subject: [PATCH V2 0/10] omap_hsmmc changes V2
>
> Hi
>
> Here are some changes we need for omap_hsmmc. They are dependent on OMAP
> board files so it would be simplest if the patches all went via the OMAP
> tree.
>
> This is version 2 of this patch set. Thank you Tony, Paul and Madhu for
> your comments.
>
> Changes from version 1:
> - amended patch 'omap_hsmmc: Move gpio and regulator control from
> board file' so that system control functions remain in the board
> file
> - for clarity, split patch 'omap: Rename mmc-twl4030 to hsmmc' into
> 'omap: Rename mmc-twl4030 files to hsmmc' and
> 'omap: Rename hsmmc symbols to reflect independence from twl4030'
> - removed patch 'omap_hsmmc: set DVFS/PM constraints'
> - added patch 'omap: Add functions for dynamic remuxing of pins'
> - renamed and reworked patch 'omap: RX51: Remux to pull eMMC lines
> down when powering off' (was 'omap_hsmmc: RX51: set padconfs to pull
> down when powering off eMMC')
> - added patch 'omap_hsmmc: Ensure regulator enable / disable are
> paired'
> - fixed mistakes in patch 'omap_hsmmc: Allow for a shared VccQ'
>
Reviewed the omap_hsmmc changes and did a sanity test on Zoom2.
Acked-by: Madhusudhan Chikkature <[email protected]>
Regards,
Madhu
>
> Adrian Hunter (9):
> omap_hsmmc: Move gpio and regulator control from board file
> omap: Rename mmc-twl4030 files to hsmmc
> omap: Rename hsmmc symbols to reflect independence from twl4030
> omap: Reconnect hsmmc context loss count
> omap: RX51: Remux to pull eMMC lines down when powering off
> omap_hsmmc: Allow for power saving without going off
> omap_hsmmc: Fix disable timeouts
> omap_hsmmc: Ensure regulator enable / disable are paired
> omap_hsmmc: Allow for a shared VccQ
>
> Tony Lindgren (1):
> omap: Add functions for dynamic remuxing of pins
>
> arch/arm/configs/rx51_defconfig | 4 +-
> arch/arm/mach-omap2/Makefile | 28 +-
> arch/arm/mach-omap2/board-2430sdp.c | 6 +-
> arch/arm/mach-omap2/board-3430sdp.c | 6 +-
> arch/arm/mach-omap2/board-cm-t35.c | 6 +-
> arch/arm/mach-omap2/board-igep0020.c | 6 +-
> arch/arm/mach-omap2/board-ldp.c | 6 +-
> arch/arm/mach-omap2/board-omap3beagle.c | 6 +-
> arch/arm/mach-omap2/board-omap3evm.c | 6 +-
> arch/arm/mach-omap2/board-omap3pandora.c | 6 +-
> arch/arm/mach-omap2/board-omap3touchbook.c | 6 +-
> arch/arm/mach-omap2/board-overo.c | 6 +-
> arch/arm/mach-omap2/board-rx51-peripherals.c | 63 +++-
> arch/arm/mach-omap2/board-zoom-peripherals.c | 6 +-
> arch/arm/mach-omap2/hsmmc.c | 261 ++++++++++++
> arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} | 14 +-
> arch/arm/mach-omap2/mmc-twl4030.c | 537 -------------------
> -----
> arch/arm/mach-omap2/mux.c | 22 +-
> arch/arm/mach-omap2/mux.h | 24 +
> arch/arm/plat-omap/include/plat/mmc.h | 35 ++-
> drivers/mmc/host/omap_hsmmc.c | 375 ++++++++++++++++-
> 21 files changed, 788 insertions(+), 641 deletions(-)
> create mode 100644 arch/arm/mach-omap2/hsmmc.c
> rename arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} (63%)
> delete mode 100644 arch/arm/mach-omap2/mmc-twl4030.c
>
>
>
> Regards
> Adrian
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
