The patch titled
sdio: add quirk to clamp byte mode transfer
has been added to the -mm tree. Its filename is
sdio-add-quirk-to-clamp-byte-mode-transfer.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: sdio: add quirk to clamp byte mode transfer
From: Bing Zhao <[email protected]>
Some SDIO cards expect byte transfers not to exceed the configured block
transfer size. Add a quirk to that effect.
Patches to make use of this quirk will be sent separately.
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/mmc/core/sdio_io.c | 7 ++++++-
include/linux/mmc/card.h | 7 +++++++
2 files changed, 13 insertions(+), 1 deletion(-)
diff -puN drivers/mmc/core/sdio_io.c~sdio-add-quirk-to-clamp-byte-mode-transfer
drivers/mmc/core/sdio_io.c
--- a/drivers/mmc/core/sdio_io.c~sdio-add-quirk-to-clamp-byte-mode-transfer
+++ a/drivers/mmc/core/sdio_io.c
@@ -189,7 +189,12 @@ static inline unsigned int sdio_max_byte
{
unsigned mval = min(func->card->host->max_seg_size,
func->card->host->max_blk_size);
- mval = min(mval, func->max_blksize);
+
+ if (mmc_blksz_for_byte_mode(func->card))
+ mval = min(mval, func->cur_blksize);
+ else
+ mval = min(mval, func->max_blksize);
+
return min(mval, 512u); /* maximum size for byte mode */
}
diff -puN include/linux/mmc/card.h~sdio-add-quirk-to-clamp-byte-mode-transfer
include/linux/mmc/card.h
--- a/include/linux/mmc/card.h~sdio-add-quirk-to-clamp-byte-mode-transfer
+++ a/include/linux/mmc/card.h
@@ -99,6 +99,8 @@ struct mmc_card {
#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes
outside of the VS CCCR range */
+#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
+ /* for byte mode */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
@@ -139,6 +141,11 @@ static inline int mmc_card_lenient_fn0(c
return c->quirks & MMC_QUIRK_LENIENT_FN0;
}
+static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c)
+{
+ return c->quirks & MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+}
+
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
_
Patches currently in -mm which might be from [email protected] are
sdio-add-quirk-to-clamp-byte-mode-transfer.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
