The patch titled
sdhci: implement CAP_CLOCK_BASE_BROKEN quirk
has been added to the -mm tree. Its filename is
sdhci-implement-cap_clock_base_broken-quirk.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: sdhci: implement CAP_CLOCK_BASE_BROKEN quirk
From: Anton Vorontsov <[email protected]>
Some hosts (e.g. as found in CNS3xxx SOCs) report wrong value in
CLOCK_BASE capability field, and currently there is no way to force the
SDHCI core to use the platform-provided base clock value.
This patch implements CAP_CLOCK_BASE_BROKEN quirk. When enabled, the
SDHCI core will always use base clock frequency provided by the platform.
Signed-off-by: Anton Vorontsov <[email protected]>
Cc: Richard Röjfors <[email protected]>
Cc: David Vrabel <[email protected]>
Cc: Pierre Ossman <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/mmc/host/sdhci.c | 3 ++-
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
diff -puN drivers/mmc/host/sdhci.c~sdhci-implement-cap_clock_base_broken-quirk
drivers/mmc/host/sdhci.c
--- a/drivers/mmc/host/sdhci.c~sdhci-implement-cap_clock_base_broken-quirk
+++ a/drivers/mmc/host/sdhci.c
@@ -1743,7 +1743,8 @@ int sdhci_add_host(struct sdhci_host *ho
host->max_clk =
(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
host->max_clk *= 1000000;
- if (host->max_clk == 0) {
+ if (host->max_clk == 0 || host->quirks &
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
if (!host->ops->get_max_clock) {
printk(KERN_ERR
"%s: Hardware doesn't specify base clock "
diff -puN drivers/mmc/host/sdhci.h~sdhci-implement-cap_clock_base_broken-quirk
drivers/mmc/host/sdhci.h
--- a/drivers/mmc/host/sdhci.h~sdhci-implement-cap_clock_base_broken-quirk
+++ a/drivers/mmc/host/sdhci.h
@@ -236,6 +236,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
/* Controller uses SDCLK instead of TMCLK for data timeouts */
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
+/* Controller reports wrong base clock capability */
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
_
Patches currently in -mm which might be from [email protected] are
linux-next.patch
gpiolib-introduce-chip-addition-removal-notifier.patch
of-gpio-add-support-for-two-stage-registration-for-the-of_gpio_chips.patch
of-gpio-implement-gpiolib-notifier-hooks.patch
of-gpio-implement-gpiolib-notifier-hooks-fix.patch
of-gpio-implement-gpiolib-notifier-hooks-fix-fix2.patch
powerpc-mcu_mpc8349emitx-remove-of-gpio-handling-stuff.patch
gpiolib-cosmetic-improvements-for-error-handling-in-gpiochip_add.patch
sdhci-implement-cap_clock_base_broken-quirk.patch
sdhci-pltfm-implement-platform-data-passing.patch
sdhci-pltfm-do-not-print-errors-in-case-of-an-extended-iomem-size.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
