The patch titled
mmc: fix incorrect interpretation of card type bits
has been added to the -mm tree. Its filename is
mmc-fix-incorrect-interpretation-of-card-type-bits.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: mmc: fix incorrect interpretation of card type bits
From: Adrian Hunter <[email protected]>
In the extended CSD register the CARD_TYPE is an 8-bit value of which the
upper 6 bits were reserved in JEDEC specifications prior to version 4.4.
In version 4.4 two of the reserved bits were designated for identifying
support for the newly added High-Speed Dual Data Rate. Unfortunately the
mmc_read_ext_csd() function required that the reserved bits be zero
instead of ignoring them as it should.
This patch makes mmc_read_ext_csd() ignore the CARD_TYPE bits that are
reserved or not yet supported. It also stops the function jumping to the
end as though an error occurred, when it is only warns that the CARD_TYPE
bits (that it does interpret) are invalid.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/mmc/core/mmc.c | 3 +--
include/linux/mmc/mmc.h | 1 +
2 files changed, 2 insertions(+), 2 deletions(-)
diff -puN
drivers/mmc/core/mmc.c~mmc-fix-incorrect-interpretation-of-card-type-bits
drivers/mmc/core/mmc.c
--- a/drivers/mmc/core/mmc.c~mmc-fix-incorrect-interpretation-of-card-type-bits
+++ a/drivers/mmc/core/mmc.c
@@ -225,7 +225,7 @@ static int mmc_read_ext_csd(struct mmc_c
mmc_card_set_blockaddr(card);
}
- switch (ext_csd[EXT_CSD_CARD_TYPE]) {
+ switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
card->ext_csd.hs_max_dtr = 52000000;
break;
@@ -237,7 +237,6 @@ static int mmc_read_ext_csd(struct mmc_c
printk(KERN_WARNING "%s: card is mmc v4 but doesn't "
"support any high-speed modes.\n",
mmc_hostname(card->host));
- goto out;
}
if (card->ext_csd.rev >= 3) {
diff -puN
include/linux/mmc/mmc.h~mmc-fix-incorrect-interpretation-of-card-type-bits
include/linux/mmc/mmc.h
--- a/include/linux/mmc/mmc.h~mmc-fix-incorrect-interpretation-of-card-type-bits
+++ a/include/linux/mmc/mmc.h
@@ -268,6 +268,7 @@ struct _mmc_csd {
#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_MASK 0x3 /* Mask out reserved and DDR bits */
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
_
Patches currently in -mm which might be from [email protected] are
mmc-fix-incorrect-interpretation-of-card-type-bits.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
