From: Thomas Abraham <[email protected]>

The s3c6410 sdhci controller does not support the 'End' attribute and NOP
attribute in the same 8-Byte ADMA descriptor.  This patch adds a new quirk
to identify sdhci host contollers with such behaviour.  In addition to
this, for controllers using the new quirk, the last entry in the ADMA
descritor table is marked with the 'End' attribute (instead of using a NOP
descriptor with 'End' attribute).

Signed-off-by: Maurus Cuelenaere <[email protected]>
Signed-off-by: Thomas Abraham <[email protected]>
Acked-by: Ben Dooks <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---

 drivers/mmc/host/sdhci.c |   20 +++++++++++++++-----
 drivers/mmc/host/sdhci.h |    2 ++
 2 files changed, 17 insertions(+), 5 deletions(-)

diff -puN 
drivers/mmc/host/sdhci.c~s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build
 drivers/mmc/host/sdhci.c
--- 
a/drivers/mmc/host/sdhci.c~s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build
+++ a/drivers/mmc/host/sdhci.c
@@ -496,12 +496,22 @@ static int sdhci_adma_table_pre(struct s
                WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
        }
 
-       /*
-        * Add a terminating entry.
-        */
+       if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
+               /*
+               * Mark the last descriptor as the terminating descriptor
+               */
+               if (desc != host->adma_desc) {
+                       desc -= 8;
+                       desc[0] |= 0x2; /* end */
+               }
+       } else {
+               /*
+               * Add a terminating entry.
+               */
 
-       /* nop, end, valid */
-       sdhci_set_adma_desc(desc, 0, 0, 0x3);
+               /* nop, end, valid */
+               sdhci_set_adma_desc(desc, 0, 0, 0x3);
+       }
 
        /*
         * Resync align buffer as we might have changed it.
diff -puN 
drivers/mmc/host/sdhci.h~s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build
 drivers/mmc/host/sdhci.h
--- 
a/drivers/mmc/host/sdhci.h~s3c6410-add-new-quirk-in-sdhci-driver-and-update-adma-descriptor-build
+++ a/drivers/mmc/host/sdhci.h
@@ -238,6 +238,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK            (1<<24)
 /* Controller reports wrong base clock capability */
 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN              (1<<25)
+/* Controller cannot support End Attribute in NOP ADMA descriptor */
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC              (1<<26)
 
        int                     irq;            /* Device IRQ */
        void __iomem *          ioaddr;         /* Mapped address */
_
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to