On Fri, Sep 03, 2010 at 05:34:53AM +0800, Hein_Tibosch wrote:
> In the latest releases of the mmc driver, the freq during initialization
> is set to a fixed 400 Khz. This was reportedly too fast for several
> users. As there doesn't seem to be an ideal frequency which-works-for-all,
> Pierre suggested to let the driver try several frequencies.
>
> This patch implements that idea. It will try mmc-initialization using
> several frequencies from an array 400, 300, 200 and 100.
> I submitted it earlier but it's now adapted to and tested with kernel
> 2.6.36-rc3.
>
> In case SDIO is broken, it'll still try to detect SDMEM, also at different
> freqs.
>
> Signed-off-by: Hein Tibosch <[email protected]>
>
> ---
> diff -Nurp a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> --- a/drivers/mmc/core/core.c 2010-08-29 23:36:04.000000000 +0800
> +++ b/drivers/mmc/core/core.c 2010-09-03 04:28:52.000000000 +0800
> @@ -907,12 +907,7 @@ static void mmc_power_up(struct mmc_host
> */
> mmc_delay(10);
>
> - if (host->f_min > 400000) {
> - pr_warning("%s: Minimum clock frequency too high for "
> - "identification mode\n", mmc_hostname(host));
> - host->ios.clock = host->f_min;
> - } else
> - host->ios.clock = 400000;
> + host->ios.clock = host->f_init;
>
> host->ios.power_mode = MMC_POWER_ON;
> mmc_set_ios(host);
> @@ -1404,6 +1399,8 @@ void mmc_rescan(struct work_struct *work
> u32 ocr;
> int err;
> unsigned long flags;
> + int i;
> + unsigned freqs[] = { 400000, 300000, 200000, 100000 };
>
> spin_lock_irqsave(&host->lock, flags);
>
> @@ -1443,55 +1440,64 @@ void mmc_rescan(struct work_struct *work
> if (host->ops->get_cd && host->ops->get_cd(host) == 0)
> goto out;
>
> - mmc_claim_host(host);
> + for (i = 0; i < ARRAY_SIZE(freqs); i++) {
> + mmc_claim_host(host);
>
> - mmc_power_up(host);
> - sdio_reset(host);
> - mmc_go_idle(host);
> + if (freqs[i] >= host->f_min)
> + host->f_init = freqs[i];
> + else if (i && freqs[i-1] <= host->f_min)
> + goto out;
The label 'out' does not release the claim on the host.
> + else
> + host->f_init = host->f_min;
>
> - mmc_send_if_cond(host, host->ocr_avail);
> + printk ("mmc_rescan: trying %u Hz\n", host->f_init);
> + mmc_power_up(host);
> + sdio_reset(host);
> + mmc_go_idle(host);
>
> - /*
> - * First we search for SDIO...
> - */
> - err = mmc_send_io_op_cond(host, 0, &ocr);
> - if (!err) {
> - if (mmc_attach_sdio(host, ocr)) {
> - mmc_claim_host(host);
> - /* try SDMEM (but not MMC) even if SDIO is broken */
> - if (mmc_send_app_op_cond(host, 0, &ocr))
> - goto out_fail;
> + mmc_send_if_cond(host, host->ocr_avail);
> +
> + /*
> + * First we search for SDIO...
> + */
> + err = mmc_send_io_op_cond(host, 0, &ocr);
> + if (!err) {
> + if (mmc_attach_sdio(host, ocr)) {
> + mmc_claim_host(host);
> + /* try SDMEM (but not MMC) even if SDIO is
> broken */
> + if (mmc_send_app_op_cond(host, 0, &ocr))
> + goto out_fail;
> +
> + if (mmc_attach_sd(host, ocr))
> + mmc_power_off(host);
> + }
> + goto out;
> + }
>
> + /*
> + * ...then normal SD...
> + */
> + err = mmc_send_app_op_cond(host, 0, &ocr);
> + if (!err) {
> if (mmc_attach_sd(host, ocr))
> mmc_power_off(host);
> + goto out;
Same problem here.
> }
> - goto out;
> - }
>
> - /*
> - * ...then normal SD...
> - */
> - err = mmc_send_app_op_cond(host, 0, &ocr);
> - if (!err) {
> - if (mmc_attach_sd(host, ocr))
> - mmc_power_off(host);
> - goto out;
> - }
> -
> - /*
> - * ...and finally MMC.
> - */
> - err = mmc_send_op_cond(host, 0, &ocr);
> - if (!err) {
> - if (mmc_attach_mmc(host, ocr))
> - mmc_power_off(host);
> - goto out;
> - }
> + /*
> + * ...and finally MMC.
> + */
> + err = mmc_send_op_cond(host, 0, &ocr);
> + if (!err) {
> + if (mmc_attach_mmc(host, ocr))
> + mmc_power_off(host);
> + goto out;
> + }
And here.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
