Hello Chris,
Several days ago, I send a patch which is used to implement the
eMMC4.4 hardware reset feature. But did not get any response till
now. I have splitted that patch into 2 for easy understanding, and
posting here for you to review it. Thanks.
The 2 patches implemented eMMC4.4 hardware reset feature in core
layer and sdhci host layer, but need each sdhci host controller to
implement the real reset part specially.
patch 0001: implemented eMMC4.4 hardware reset feature in mmc core
layer.
patch 0002: implemented hardware reset callback in sdhci host
layer.
I also have a concern about the enabling hardware reset part. As
eMMC 4.4 standar says, to enable hardware reset need to set the bit
0 of byte 162 in ext_csd register. However this register is onetime
programmable, once setted, cannot be changed any more. And the
standar also says this feature is disabled by default. If driver
does not set it, the feature can not be enabled. So is it suitable
for driver to set this bit?
Thanks
Chuanxiao
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
