On Nov 7, 2010, at 2:04 PM, Wolfram Sang wrote: > On Fri, Oct 08, 2010 at 12:31:34PM -0700, Philip Rakity wrote: >> >> 8 bit width is a new feature in the sd 3.0 spec. Add checks to >> ensure HOST_CONTROL register set 8 bit mode only if sd 3.0 >> >> add quirk to indicate that board design supports 8 data lines. >> The controller can support 8 data bits but the board design may >> only bring out 4 data bits. > > This isn't a quirk, this is platform_data, no?
Never sure of the difference between a quirk and platform data. example: Broken card detect is a quirk but maybe some slots on the board work and some do not > > Without looking deeply into it, I think we need to use the callback you > introduced in the other patch? > It is needed in my experience because of how board design is done. The controller can support 8 bits but the board may not have DAT4-DAT7 connected. > Regards, > > Wolfram > > PS: Sorry if there already was a discussion I might have missed. The bus width > thingie became a bit scattered, so I lost track... > > -- > Pengutronix e.K. | Wolfram Sang | > Industrial Linux Solutions | http://www.pengutronix.de/ | -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
