Hi all,
I have updated the HW reset feature patch to be version4, but no one has given 
me any comment....
Does any want to review these patches?

> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Chuanxiao Dong
> Sent: Friday, December 03, 2010 8:13 PM
> To: [email protected]
> Cc: [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected]
> Subject: [PATCH v2 0/4]enable Background operations and HPI feature for
> eMMC4.41 card
> 
> Hi,
>       This is the version 2 patch to enable background operations and HPI
>       feature for eMMC4.41 card. Both of these two features are optional.
> 
>       Background operations can be started when user request queue is idle. So
>       each time user start to handle a new request, driver should check
>       whether the card is doing BKOPS. If so, should wait until BKOPS is done
>       or use a HPI command to interrupt it if eMMC card support HPI. The
>       serial patches were designed as this work flow.
> 
>       This version patch only use HPI to interrupt background operation,
>       didnot implement to interrupt foreground operations.
> 
>       patch1: enable background operations feature for supported eMMC card.
>       patch2: start to do background operations when user request queue is
>       idle. Check whether card is doing BKOPS when start a new user request.
>       patch3: enable HPI for supported eMMC card.
>       patch4: use HPI command to interrupt BKOPS.
> 
>       change-log:
> 
>       patch2: remove the added workqueue in the version 1 patch. This
>       workqueue is used to put card in runtime suspend state. Since current
>       MMC driver has not a runtime power management in card block layer, just
>       remove this workqueue. Define erro response to be macro
> R1_ERROR_RESPONSE
> 
>       patch3: fixed community comment. Thanks for Kyungmin Park.
> 
> Thanks
> Chuanxiao
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to