Based on report made by Yauhen in: "MMC: Fix multiblock SDIO transfers in AT91 MCI" patch, I report those changes to the brother driver: atmel-mci.
So, this patch sets SDIO transfer types: SDIO block and SDIO byte transfers instead of using ordinary MMC block transfers. It is checking opcode for SDIO CMD53 and setting transfer type in MCI_CMDR register properly. Reported-by: Yauhen Kharuzhy <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]> --- Hi Chris, In addition to the at91_mci multiblock SDIO fix, I add this little one too as it concerns the brother driver atmel-mci with same issue. I hope that you will be able to queue those fixes to .37-final and stable... Thanks a lot, best regards, drivers/mmc/host/atmel-mci.c | 18 ++++++++++++------ 1 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 301351a..ad2a7a0 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -26,6 +26,7 @@ #include <linux/stat.h> #include <linux/mmc/host.h> +#include <linux/mmc/sdio.h> #include <mach/atmel-mci.h> #include <linux/atmel-mci.h> @@ -532,12 +533,17 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, data = cmd->data; if (data) { cmdr |= MCI_CMDR_START_XFER; - if (data->flags & MMC_DATA_STREAM) - cmdr |= MCI_CMDR_STREAM; - else if (data->blocks > 1) - cmdr |= MCI_CMDR_MULTI_BLOCK; - else - cmdr |= MCI_CMDR_BLOCK; + + if (cmd->opcode == SD_IO_RW_EXTENDED) { + cmdr |= MCI_CMDR_SDIO_BLOCK; + } else { + if (data->flags & MMC_DATA_STREAM) + cmdr |= MCI_CMDR_STREAM; + else if (data->blocks > 1) + cmdr |= MCI_CMDR_MULTI_BLOCK; + else + cmdr |= MCI_CMDR_BLOCK; + } if (data->flags & MMC_DATA_READ) cmdr |= MCI_CMDR_TRDIR_READ; -- 1.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
