Last tests showed some problems with MX51, especially with card_detect. While
the approach in general will suffice for i.MX5x, it seems there are a few
details missing right now. Because I do not have the resources (both time and
hardware) to deal with these issues, I propose a step by step approach. Let's
add the functionality for mx25/35 first and make sure there is no difference in
behaviour for mx5x. (Note that the i.MX5x can route the pins directly to the
controller, so a properly designed board should not need these gpio-additions.)
That is what this patch series does: The main change is that mx5x won't notice
any difference. For mx25/35, it is the same as it has been tested by Eric and
Marc.
Thanks to all involved in providing feedback, I hope it can go in now. If you
want to add support for it to your board, please CC me.
Have a nice weekend,
Wolfram
Wolfram Sang (3):
mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO on
mx25/35
mmc: sdhci-esdhc: broken card detection is not a default quirk
mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35
arch/arm/plat-mxc/include/mach/esdhc.h | 12 +++-
drivers/mmc/host/sdhci-esdhc-imx.c | 134 +++++++++++++++++++++++++++++---
drivers/mmc/host/sdhci-esdhc.h | 1 -
drivers/mmc/host/sdhci-of-esdhc.c | 3 +-
4 files changed, 135 insertions(+), 15 deletions(-)
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
