> -----Original Message-----
> From: Arindam Nath [mailto:[email protected]] On Behalf Of Arindam
> Nath
> Sent: Friday, March 04, 2011 5:03 PM
> To: [email protected]
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; Arindam Nath
> Subject: [PATCH v2 12/12] mmc: sdhci: add support for retuning mode 1
> 
> Host Controller v3.00 can support retuning modes 1,2 or 3 depending on
> the bits 46-47 of the Capabilities register. Also, the timer count for
> retuning is indicated by bits 40-43 of the same register. We initialize
> timer_list for retuning after successfull UHS-I initialization. Since
> retuning mode 1 sets a limit of 4MB on the maximum data length, we set
> max_blk_count appropriately. Once the tuning timer expires, we set
> SDHCI_NEEDS_RETUNING flag, and if the flag is set, we execute tuning
> procedure before sending the next command. We need to restore
> mmc_request
> structure after executing retuning procedure since host->mrq is used
> inside the procedure to send CMD19. We also disable and re-enable this
> flag during suspend and resume respectively, as per the spec v3.00.
> 
> Signed-off-by: Arindam Nath <[email protected]>
> ---
>  drivers/mmc/core/sd.c     |    5 ++
>  drivers/mmc/host/sdhci.c  |  109
> ++++++++++++++++++++++++++++++++++++++++++++-
>  drivers/mmc/host/sdhci.h  |    6 ++-
>  include/linux/mmc/host.h  |    1 +
>  include/linux/mmc/sdhci.h |    6 +++
>  5 files changed, 124 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index ae7a771..1f3cf57 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -641,6 +641,11 @@ static int mmc_sd_init_uhs_card(struct mmc_card
> *card)
>       if (!mmc_host_is_spi(card->host) && card->host->ops-
> >execute_tuning)
>               card->host->ops->execute_tuning(card->host);
> 
> +     /* Initialize and start re-tuning timer */
> +     if (!mmc_host_is_spi(card->host) &&
> +         card->host->ops->start_retuning_timer)
> +             card->host->ops->start_retuning_timer(card->host);

Why you need extra mmc_ops for this? You can start the retuning timer when
first time your driver's "execute_tuning" ops gets executed.

> +
>  out:
>       kfree(status);
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 2ffb0c4..8bf0408 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -48,6 +48,8 @@ static void sdhci_finish_data(struct sdhci_host *);
> 
>  static void sdhci_send_command(struct sdhci_host *, struct mmc_command
> *);
>  static void sdhci_finish_command(struct sdhci_host *);
> +static void sdhci_execute_tuning(struct mmc_host *mmc);
> +static void sdhci_tuning_timer(unsigned long data);
> 
>  static void sdhci_dumpregs(struct sdhci_host *host)
>  {
> @@ -1240,8 +1242,34 @@ static void sdhci_request(struct mmc_host *mmc,
> struct mmc_request *mrq)
>       if (!present || host->flags & SDHCI_DEVICE_DEAD) {
>               host->mrq->cmd->error = -ENOMEDIUM;
>               tasklet_schedule(&host->finish_tasklet);
> -     } else
> +     } else {
> +             u32 present_state;
> +
> +             present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
> +             /*
> +              * Check if the re-tuning timer has already expired and
> there
> +              * is no on-going data transfer. If so, we need to execute
> +              * tuning procedure before sending command.
> +              */
> +             if ((host->flags & SDHCI_NEEDS_RETUNING) &&
> +                 !(present_state & (SDHCI_DOING_WRITE |
> +                  SDHCI_DOING_READ))) {
> +                     host->flags &= ~SDHCI_NEEDS_RETUNING;
> +                     /* Reload the new initial value for timer */
> +                     if (host->tuning_mode == SDHCI_TUNING_MODE_1)
> +                             mod_timer(&host->tuning_timer, jiffies +
> +                                     host->tuning_count * HZ);
> +
> +                     spin_unlock_irqrestore(&host->lock, flags);
> +                     sdhci_execute_tuning(mmc);
> +                     spin_lock_irqsave(&host->lock, flags);
> +
> +                     /* Restore original mmc_request structure */
> +                     host->mrq = mrq;
> +             }
> +
>               sdhci_send_command(host, mrq->cmd);
> +     }
> 
>       mmiowb();
>       spin_unlock_irqrestore(&host->lock, flags);
> @@ -1667,6 +1695,26 @@ static void sdhci_disable_preset_value(struct
> sdhci_host *host)
>       sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
>  }
> 
> +static void sdhci_start_retuning_timer(struct mmc_host *mmc)
> +{
> +     struct sdhci_host *host;
> +     unsigned long flags;
> +
> +     host = mmc_priv(mmc);
> +
> +     spin_lock_irqsave(&host->lock, flags);
> +
> +     if (host->tuning_count &&
> +         (host->tuning_mode == SDHCI_TUNING_MODE_1)) {
> +             mod_timer(&host->tuning_timer, jiffies + host->tuning_count
> *
> +                     HZ);
> +             /* Tuning mode 1 limits the maximum data length to 4MB */
> +             mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size;
> +     }
> +
> +     spin_unlock_irqrestore(&host->lock, flags);
> +}
> +
>  static const struct mmc_host_ops sdhci_ops = {
>       .request        = sdhci_request,
>       .set_ios        = sdhci_set_ios,
> @@ -1676,6 +1724,7 @@ static const struct mmc_host_ops sdhci_ops = {
>       .get_max_current_180            = sdhci_get_max_current_180,
>       .execute_tuning                 = sdhci_execute_tuning,
>       .enable_preset_value            = sdhci_enable_preset_value,
> +     .start_retuning_timer           = sdhci_start_retuning_timer,
>  };
> 
> 
> /**********************************************************************
> *******\
> @@ -1725,6 +1774,10 @@ static void sdhci_tasklet_finish(unsigned long
> param)
> 
>       del_timer(&host->timer);
> 
> +     if (host->version >= SDHCI_SPEC_300)
> +             del_timer(&host->tuning_timer);
> +
> +
>       mrq = host->mrq;
> 
>       /*
> @@ -1799,6 +1852,20 @@ static void sdhci_timeout_timer(unsigned long
> data)
>       spin_unlock_irqrestore(&host->lock, flags);
>  }
> 
> +static void sdhci_tuning_timer(unsigned long data)
> +{
> +     struct sdhci_host *host;
> +     unsigned long flags;
> +
> +     host = (struct sdhci_host *)data;
> +
> +     spin_lock_irqsave(&host->lock, flags);
> +
> +     host->flags |= SDHCI_NEEDS_RETUNING;
> +
> +     spin_unlock_irqrestore(&host->lock, flags);
> +}
> +
> 
> /**********************************************************************
> *******\
>   *
> *
>   * Interrupt handling
> *
> @@ -2057,6 +2124,15 @@ int sdhci_suspend_host(struct sdhci_host *host,
> pm_message_t state)
> 
>       sdhci_disable_card_detection(host);
> 
> +     /* Disable tuning since we are suspending */
> +     if ((host->version >= SDHCI_SPEC_300) &&
> +         host->tuning_count &&
> +         (host->tuning_mode == SDHCI_TUNING_MODE_1)) {
> +             host->flags &= ~SDHCI_NEEDS_RETUNING;
> +             mod_timer(&host->tuning_timer, jiffies +
> +                     host->tuning_count * HZ);
> +     }
> +
>       ret = mmc_suspend_host(host->mmc);
>       if (ret)
>               return ret;
> @@ -2098,6 +2174,12 @@ int sdhci_resume_host(struct sdhci_host *host)
>       ret = mmc_resume_host(host->mmc);
>       sdhci_enable_card_detection(host);
> 
> +     /* Set the re-tuning expiration flag */
> +     if ((host->version >= SDHCI_SPEC_300) &&
> +         host->tuning_count &&
> +         (host->tuning_mode == SDHCI_TUNING_MODE_1))
> +             host->flags |= SDHCI_NEEDS_RETUNING;
> +
>       return ret;
>  }
> 
> @@ -2353,6 +2435,21 @@ int sdhci_add_host(struct sdhci_host *host)
>       if (caps[1] & SDHCI_DRIVER_TYPE_D)
>               mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
> 
> +     /* Initial value for re-tuning timer count */
> +     host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK)
> >>
> +                           SDHCI_RETUNING_TIMER_COUNT_SHIFT;
> +
> +     /*
> +      * In case Re-tuning Timer is not disabled, the actual value of
> +      * re-tuning timer will be 2 ^ (n - 1).
> +      */
> +     if (host->tuning_count)
> +             host->tuning_count = 1 << (host->tuning_count - 1);
> +
> +     /* Re-tuning mode supported by the Host Controller */
> +     host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >>
> +                          SDHCI_RETUNING_MODE_SHIFT;
> +
>       ocr_avail = 0;
>       /*
>        * According to SD Host Controller spec v3.00, if the Host System
> @@ -2488,9 +2585,15 @@ int sdhci_add_host(struct sdhci_host *host)
> 
>       setup_timer(&host->timer, sdhci_timeout_timer, (unsigned
> long)host);
> 
> -     if (host->version >= SDHCI_SPEC_300)
> +     if (host->version >= SDHCI_SPEC_300) {
>               init_waitqueue_head(&host->buf_ready_int);
> 
> +             /* Initialize re-tuning timer */
> +             init_timer(&host->tuning_timer);
> +             host->tuning_timer.data = (unsigned long)host;
> +             host->tuning_timer.function = sdhci_tuning_timer;
> +     }
> +
>       ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
>               mmc_hostname(mmc), host);
>       if (ret)
> @@ -2584,6 +2687,8 @@ void sdhci_remove_host(struct sdhci_host *host,
> int dead)
>       free_irq(host->irq, host);
> 
>       del_timer_sync(&host->timer);
> +     if (host->version >= SDHCI_SPEC_300)
> +             del_timer_sync(&host->tuning_timer);
> 
>       tasklet_kill(&host->card_tasklet);
>       tasklet_kill(&host->finish_tasklet);
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 37a8c32..53d5909 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -190,7 +190,11 @@
>  #define  SDHCI_DRIVER_TYPE_A 0x00000010
>  #define  SDHCI_DRIVER_TYPE_C 0x00000020
>  #define  SDHCI_DRIVER_TYPE_D 0x00000040
> -#define  SDHCI_USE_SDR50_TUNING      0x00002000
> +#define  SDHCI_RETUNING_TIMER_COUNT_MASK     0x00000F00
> +#define  SDHCI_RETUNING_TIMER_COUNT_SHIFT    8
> +#define  SDHCI_USE_SDR50_TUNING                      0x00002000
> +#define  SDHCI_RETUNING_MODE_MASK            0x0000C000
> +#define  SDHCI_RETUNING_MODE_SHIFT           14
>  #define  SDHCI_CLOCK_MUL_MASK        0x00FF0000
>  #define  SDHCI_CLOCK_MUL_SHIFT       16
> 
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index e63e063..09f5d03 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -131,6 +131,7 @@ struct mmc_host_ops {
>       int     (*get_max_current_180)(struct mmc_host *mmc);
>       void    (*execute_tuning)(struct mmc_host *host);
>       void    (*enable_preset_value)(struct mmc_host *host);
> +     void    (*start_retuning_timer)(struct mmc_host *host);
>  };
> 
>  struct mmc_card;
> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
> index 4be4022..c6539be 100644
> --- a/include/linux/mmc/sdhci.h
> +++ b/include/linux/mmc/sdhci.h
> @@ -110,6 +110,7 @@ struct sdhci_host {
>  #define SDHCI_REQ_USE_DMA    (1<<2)  /* Use DMA for this req. */
>  #define SDHCI_DEVICE_DEAD    (1<<3)  /* Device unresponsive */
>  #define SDHCI_SDR50_NEEDS_TUNING (1<<4)      /* SDR50 needs tuning */
> +#define SDHCI_NEEDS_RETUNING (1<<5)  /* Host needs retuning */
> 
>       unsigned int version;   /* SDHCI spec. version */
> 
> @@ -152,6 +153,11 @@ struct sdhci_host {
>       wait_queue_head_t       buf_ready_int;  /* Waitqueue for Buffer Read
> Ready interrupt */
>       unsigned int            tuning_done;    /* Condition flag set
> when CMD19 succeeds */
> 
> +     unsigned int            tuning_count;   /* Timer count for re-
> tuning */
> +     unsigned int            tuning_mode;    /* Re-tuning mode
> supported by host */
> +#define SDHCI_TUNING_MODE_1  0
> +     struct timer_list       tuning_timer;   /* Timer for tuning */
> +
>       unsigned long private[0] ____cacheline_aligned;
>  };
>  #endif /* __SDHCI_H */
> --
> 1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to