The power-mode sequence on MMC is MMC_POWER_OFF -> MMC_POWER_UP -> MMC_POWER_ON and not MMC_POWER_ON -> MMC_POWER_UP, as the driver currently is implying.
Signed-off-by: Guennadi Liakhovetski <[email protected]> --- Please, test on MFD! V2: rebase on top of driver split drivers/mmc/host/tmio_mmc_pio.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index e1aed25..69772ab 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -746,20 +746,20 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->clock) tmio_mmc_set_clock(host, ios->clock); - /* Power sequence - OFF -> ON -> UP */ + /* Power sequence - OFF -> UP -> ON */ switch (ios->power_mode) { case MMC_POWER_OFF: /* power down SD bus */ if (host->set_pwr) host->set_pwr(host->pdev, 0); tmio_mmc_clk_stop(host); break; - case MMC_POWER_ON: /* power up SD bus */ + case MMC_POWER_ON: /* start bus clock */ + tmio_mmc_clk_start(host); + break; + case MMC_POWER_UP: /* power up SD bus */ if (host->set_pwr) host->set_pwr(host->pdev, 1); break; - case MMC_POWER_UP: /* start bus clock */ - tmio_mmc_clk_start(host); - break; } switch (ios->bus_width) { -- 1.7.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
