Hi Andrei,

> -----Original Message-----
> From: Andrei Warkentin [mailto:[email protected]]
> Sent: Saturday, April 16, 2011 4:11 PM
> To: [email protected]
> Cc: Nath, Arindam; Andrei Warkentin; [email protected]; [email protected]
> Subject: [patchv3 4/5] MMC: Block CMD23 support for UHS104/SDXC cards.
> 
> SD cards operating at UHS104 or better support SET_BLOCK_COUNT.
> 
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Andrei Warkentin <[email protected]>
> ---
>  drivers/mmc/card/block.c |    9 ++++++---
>  drivers/mmc/core/sd.c    |    1 +
>  include/linux/mmc/card.h |    1 +
>  include/linux/mmc/sd.h   |    1 +
>  4 files changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
> index 4b1a58e..23da6e6 100644
> --- a/drivers/mmc/card/block.c
> +++ b/drivers/mmc/card/block.c
> @@ -851,9 +851,12 @@ static struct mmc_blk_data
> *mmc_blk_alloc_req(struct mmc_card *card,
>       blk_queue_logical_block_size(md->queue.queue, 512);
>       set_capacity(md->disk, size);
> 
> -     if (mmc_host_cmd23(card->host) &&
> -         mmc_card_mmc(card))
> -             md->flags |= MMC_BLK_CMD23;
> +     if (mmc_host_cmd23(card->host)) {
> +             if (mmc_card_mmc(card) ||
> +                 (mmc_card_sd(card) &&
> +                  card->scr.cmds & SCR_CMDS_CMD23))
> +                     md->flags |= MMC_BLK_CMD23;
> +     }
> 
>       if (mmc_card_mmc(card) &&
>           md->flags & MMC_BLK_CMD23 &&
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 6dac89f..16a1f10 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -195,6 +195,7 @@ static int mmc_decode_scr(struct mmc_card *card)
>       else
>               card->erased_byte = 0x0;
> 
> +     scr->cmds = UNSTUFF_BITS(resp, 32, 2);

Since support for CMD20 and CMD23 have been added in Physical Layer Spec v3.01, 
IMO it is better to set scr->cmds based on the spec version, rather than doing 
it unconditionally. Something like,

+       if (scr->sda_vsn == SCR_SPEC_VER_2) {
+               /* Check if Physical Layer Spec v3.0 is supported*/
+               scr->sda_spec3 = UNSTUFF_BITS(resp, 47, 1);
+               if (scr->sda_spec3)
+                       scr->cmds = UNSTUFF_BITS(resp, 32, 2);
+       }

>       return 0;
>  }
> 
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index c758181..b33186a 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -70,6 +70,7 @@ struct sd_scr {
>       unsigned char           bus_widths;
>  #define SD_SCR_BUS_WIDTH_1   (1<<0)
>  #define SD_SCR_BUS_WIDTH_4   (1<<2)
> +     unsigned char           cmds;
>  };

How about...

struct sd_scr {
       unsigned char           sda_vsn;
+       unsigned char           sda_spec3;
       unsigned char           bus_widths;
 #define SD_SCR_BUS_WIDTH_1     (1<<0)
 #define SD_SCR_BUS_WIDTH_4     (1<<2)
+       unsigned char           cmds;
+#define SD_SCR_CMD20_SUPPORT   (1<<0)
+#define SD_SCR_CMD23_SUPPORT   (1<<1)
 };

This way we can let go of...

> diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
> index 3fd85e0..81ba37b 100644
> --- a/include/linux/mmc/sd.h
> +++ b/include/linux/mmc/sd.h
> +#define SCR_CMDS_CMD23               (1 << 1) /* Supports CMD23 */

Thanks,
Arindam
 


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to