Begin forwarded message:
> From: Philip Rakity <[email protected]>
> Date: April 22, 2011 1:18:33 PM PDT
> To: "[email protected]" <[email protected]>
> Cc: Zhangfei Gao <[email protected]>
> Subject: [PATCH] sdhci: sdhci-pxa.c: Add post reset processing for chip
> specific registers
>
>
> RESET_ALL resets chips private registers.
> Reset to values specified in board file.
>
> depends on board specific mach-mmp/plat-pxa sdhci.h definitions
>
> Signed-off-by: Philip Rakity <[email protected]>
> ---
> drivers/mmc/host/sdhci-pxa.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 42 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
> index c8abf0f..1dc0988 100644
> --- a/drivers/mmc/host/sdhci-pxa.c
> +++ b/drivers/mmc/host/sdhci-pxa.c
> @@ -29,6 +29,13 @@
>
> #define DRIVER_NAME "sdhci-pxa"
>
> +#define SD_CLOCK_AND_BURST_SIZE_SETUP 0x10A
> +#define SDCLK_DELAY_MASK 0x1F
> +#define SDCLK_SEL_MASK 0x1
> +#define SDCLK_DELAY_SHIFT 9
> +#define SDCLK_SEL_SHIFT 8
> +
> +
> struct sdhci_pxa {
> struct sdhci_host *host;
> struct sdhci_pxa_platdata *pdata;
> @@ -53,7 +60,42 @@ static void enable_clock(struct sdhci_host *host)
> }
> }
>
> +static void set_clock_and_burst_size(struct sdhci_host *host)
> +{
> + u16 tmp;
> + struct sdhci_pxa *pxa = sdhci_priv(host);
> +
> + pr_debug("%s:%s: adjust = %d\n",
> + __func__, mmc_hostname(host->mmc), pxa->pdata->adjust_clocks);
> +
> + if (pxa->pdata->adjust_clocks) {
> + tmp = readw(host->ioaddr + SD_CLOCK_AND_BURST_SIZE_SETUP);
> + pr_debug("%s:%s: (B) SD_CLOCK_AND_BURST = %04X, "
> + "delay = %d, sel = %d\n",
> + __func__, mmc_hostname(host->mmc), tmp,
> + pxa->pdata->clk_delay, pxa->pdata->clk_select);
> + tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT);
> + tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT);
> + tmp |= (pxa->pdata->clk_delay & SDCLK_DELAY_MASK) <<
> + SDCLK_DELAY_SHIFT;
> + tmp |= (pxa->pdata->clk_select & SDCLK_SEL_MASK) <<
> + SDCLK_SEL_SHIFT;
> + writew(tmp, host->ioaddr + SD_CLOCK_AND_BURST_SIZE_SETUP);
> + pr_debug("%s:%s: (A) SD_CLOCK_AND_BURST_SIZE_SETUP = %04X\n",
> + __func__, mmc_hostname(host->mmc), tmp);
> + }
> +}
> +
> +static void platform_reset_exit(struct sdhci_host *host, u8 mask)
> +{
> + if (mask == SDHCI_RESET_ALL) {
> + /* reset private registers */
> + set_clock_and_burst_size(host);
> + }
> +}
> +
> static struct sdhci_ops sdhci_pxa_ops = {
> + .platform_reset_exit = platform_reset_exit,
> };
>
> /*****************************************************************************\
> --
> 1.7.0.4
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
On Apr 27, 2011, at 2:33 AM, Russell King - ARM Linux wrote:
> On Fri, Apr 22, 2011 at 01:13:28PM -0700, Philip Rakity wrote:
>> The PXA168, PXA910, and MMP2 SoC have the ability to adjust the SD/MMC
>> clock. This feature is useful and required depending on the board
>> design. Add infrastructure to support SD clock tuning.
>
> It just adds fields to a structure which remain unused. On its own this
> patch is useless, and I don't see a patch which makes use of these new
> fields in any way. Did you forget to copy it to the linux-arm-kernel
> list?
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
