Hi Arindam, Since this mmc_set_signal_voltage() routine will be used by SDIO and MMC should the code be moved the code core.c ?
I am not sure about drive strength or driver type since SDIO handles these differently then SD. Philip On Apr 26, 2011, at 8:26 AM, Philip Rakity wrote: > > Hi Arindam, > > On Apr 25, 2011, at 11:45 PM, Nath, Arindam wrote: > >> Hi Philip, >> >> >>> -----Original Message----- >>> From: Philip Rakity [mailto:[email protected]] >>> Sent: Saturday, April 23, 2011 1:56 AM >>> To: [email protected] >>> Cc: Nath, Arindam >>> Subject: [PATCH] mmc: eMMC signal voltage does not use CMD11 >>> >>> >>> eMMC chips do not use CMD11 when changing voltage. Add extra >>> argument to call to indicate if CMD11 needs to be sent. >>> >>> Signed-off-by: Philip Rakity <[email protected]> >>> --- >>> drivers/mmc/core/sd.c | 4 ++-- >>> drivers/mmc/core/sd_ops.c | 4 ++-- >>> drivers/mmc/core/sd_ops.h | 3 ++- >>> 3 files changed, 6 insertions(+), 5 deletions(-) >>> >>> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c >>> index ed6b11b..362716c 100644 >>> --- a/drivers/mmc/core/sd.c >>> +++ b/drivers/mmc/core/sd.c >>> @@ -734,7 +734,7 @@ try_again: >>> */ >>> if (!mmc_host_is_spi(host) && rocr && >>> ((*rocr & 0x41000000) == 0x41000000)) { >>> - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); >>> + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, >>> 1); >>> if (err) { >>> ocr &= ~(1 << 24); >>> goto try_again; >>> @@ -1115,7 +1115,7 @@ int mmc_attach_sd(struct mmc_host *host) >>> host->ocr_avail = host->ocr_avail_sd; >>> >>> /* Make sure we are at 3.3V signalling voltage */ >>> - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330); >>> + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); >>> if (err) >>> return err; >>> >>> diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c >>> index fc7edc4..6fd35f6 100644 >>> --- a/drivers/mmc/core/sd_ops.c >>> +++ b/drivers/mmc/core/sd_ops.c >>> @@ -149,7 +149,7 @@ int mmc_app_set_bus_width(struct mmc_card *card, >>> int width) >>> return 0; >>> } >>> >>> -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) >>> +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, >>> int cmd11) >>> { >>> struct mmc_command cmd; >>> int err = 0; >>> @@ -160,7 +160,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, >>> int signal_voltage) >>> * Send CMD11 only if the request is to switch the card to >>> * 1.8V signalling. >>> */ >>> - if (signal_voltage == MMC_SIGNAL_VOLTAGE_180) { >>> + if (signal_voltage != MMC_SIGNAL_VOLTAGE_330 && cmd11) { >> >> Since we are going to send CMD11 only to change to 1.8V signaling, and when >> cmd11 is set, isn't it better to have >> >> if ((signal_voltage == MMC_SIGNAL_VOLTAGE_180) && cmd11) { > > I am okay with this. Wanted to cover the possible future case for 1.2V > support and CMD11. I know eMMC does not do > CMD11 but incase SD or SDIO ever did. If you feel strongly will change code. >> >> Thanks, >> Arindam >> >>> memset(&cmd, 0, sizeof(struct mmc_command)); >>> >>> cmd.opcode = SD_SWITCH_VOLTAGE; >>> diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h >>> index d5bdda5..2670e71 100644 >>> --- a/drivers/mmc/core/sd_ops.h >>> +++ b/drivers/mmc/core/sd_ops.h >>> @@ -20,7 +20,8 @@ int mmc_app_send_scr(struct mmc_card *card, u32 >>> *scr); >>> int mmc_sd_switch(struct mmc_card *card, int mode, int group, >>> u8 value, u8 *resp); >>> int mmc_app_sd_status(struct mmc_card *card, void *ssr); >>> -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); >>> +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, >>> + int cmd11); >>> >>> #endif >>> >>> -- >>> 1.7.0.4 >>> >>> >> >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
