For loops that start with i=0, re-use a single counter int.

Signed-off-by: Chris Ball <[email protected]>
---
 drivers/mmc/host/vub300.c |   33 ++++++++++++++-------------------
 1 files changed, 14 insertions(+), 19 deletions(-)

diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index ac2fa06..0463921 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -905,6 +905,7 @@ static void send_command(struct vub300_mmc_host *vub300)
        struct mmc_command *cmd = vub300->cmd;
        struct mmc_data *data = vub300->data;
        int retval;
+       int i;
        u8 response_type;
        if (vub300->app_spec) {
                switch (cmd->opcode) {
@@ -1014,14 +1015,11 @@ static void send_command(struct vub300_mmc_host *vub300)
                        vub300->resp_len = 0;
                        break;
                case 16:
-               {
-                       int i;
                        for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
                                vub300->fbs[i] = 0xFFFF & cmd->arg;
                        response_type = SDRT_1;
                        vub300->resp_len = 6;
                        break;
-               }
                case 17:
                case 18:
                case 24:
@@ -2215,33 +2213,30 @@ static int vub300_probe(struct usb_interface *interface,
        vub300->command_res_urb = command_res_urb;
        vub300->usb_timed_out = 0;
        vub300->dynamic_register_count = 0;
-       {
-               int i;
-               for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
-                       vub300->fn[i].offload_point = 0;
-                       vub300->fn[i].offload_count = 0;
-               }
+
+       for (i = 0; i < ARRAY_SIZE(vub300->fn); i++) {
+               vub300->fn[i].offload_point = 0;
+               vub300->fn[i].offload_count = 0;
        }
+
        vub300->total_offload_count = 0;
        vub300->irq_enabled = 0;
        vub300->irq_disabled = 0;
        vub300->irqs_queued = 0;
-       {
-               int i;
-               for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
-                       vub300->sdio_register[i++].activate = 0;
-       }
+
+       for (i = 0; i < ARRAY_SIZE(vub300->sdio_register); i++)
+               vub300->sdio_register[i++].activate = 0;
+
        vub300->udev = udev;
        vub300->interface = interface;
        vub300->cmnd_res_ep = 0;
        vub300->cmnd_out_ep = 0;
        vub300->data_inp_ep = 0;
        vub300->data_out_ep = 0;
-       {
-               int i;
-               for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
-                       vub300->fbs[i] = 512;
-       }
+
+       for (i = 0; i < ARRAY_SIZE(vub300->fbs); i++)
+               vub300->fbs[i] = 512;
+
        /*
         *      set up the endpoint information
         *
-- 
1.7.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to