This patch uses runtime PM to allow the system to power down the MMC controller, when the MMC closk is switched off.
Signed-off-by: Guennadi Liakhovetski <[email protected]> --- drivers/mmc/host/tmio_mmc_pio.c | 39 +++++++++++++++++++-------------------- 1 files changed, 19 insertions(+), 20 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index ad6347b..a36535e 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -771,33 +771,30 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_unlock_irqrestore(&host->lock, flags); - if (ios->clock) - tmio_mmc_set_clock(host, ios->clock); - - /* Power sequence - OFF -> UP -> ON */ - if (ios->power_mode == MMC_POWER_UP) { - if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) && !pdata->power) { + /* + * pdata->power == false only if COLD_CD is available, otherwise only + * in short time intervals during probing or resuming + */ + if (ios->power_mode == MMC_POWER_ON && ios->clock) { + if (!pdata->power) { pm_runtime_get_sync(&host->pdev->dev); pdata->power = true; } + tmio_mmc_set_clock(host, ios->clock); /* power up SD bus */ if (host->set_pwr) host->set_pwr(host->pdev, 1); - } else if (ios->power_mode == MMC_POWER_OFF || !ios->clock) { - /* power down SD bus */ - if (ios->power_mode == MMC_POWER_OFF) { - if (host->set_pwr) - host->set_pwr(host->pdev, 0); - if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) && - pdata->power) { - pdata->power = false; - pm_runtime_put(&host->pdev->dev); - } - } - tmio_mmc_clk_stop(host); - } else { /* start bus clock */ tmio_mmc_clk_start(host); + } else if (ios->power_mode != MMC_POWER_UP) { + if (host->set_pwr) + host->set_pwr(host->pdev, 0); + if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) && + pdata->power) { + pdata->power = false; + pm_runtime_put(&host->pdev->dev); + } + tmio_mmc_clk_stop(host); } switch (ios->bus_width) { @@ -921,8 +918,10 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, tmio_mmc_request_dma(_host, pdata); /* We have to keep the device powered for its card detection to work */ - if (!(pdata->flags & TMIO_MMC_HAS_COLD_CD)) + if (!(pdata->flags & TMIO_MMC_HAS_COLD_CD)) { + pdata->power = true; pm_runtime_get_noresume(&pdev->dev); + } mmc_add_host(mmc); -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
