Hi all,
We are using a Freescale i.MX233 and are running on mainline Linux.
A wifi chip company (Redpine Signals) is doing a port of their sdio driver for
their Wifi module for our platform. But they are running into problems with the
sdio.
We have tested the mxs-mmc port using normal sd card which is working, but now
with sdio we keep on getting these error messages in our serial console:
[ 45.180000] mmc0: new high speed SDIO card at address fffd
[ 46.200000] mmc0: card fffd removed
[ 46.370000] mmc0: new high speed SDIO card at address fffd
[ 47.390000] mmc0: card fffd removed
[ 47.560000] mmc0: new high speed SDIO card at address fffd
[ 48.580000] mmc0: card fffd removed
[ 48.750000] mmc0: new high speed SDIO card at address fffd
[ 49.770000] mmc0: card fffd
These are printed in drivers/mmc/core/bus.c:
void mmc_remove_card(struct mmc_card *card)
{
#ifdef CONFIG_DEBUG_FS
mmc_remove_card_debugfs(card);
#endif
if (mmc_card_present(card)) {
if (mmc_host_is_spi(card->host)) {
printk(KERN_INFO "%s: SPI card removed\n",
mmc_hostname(card->host));
} else {
printk(KERN_INFO "%s: card %04x removed\n",
mmc_hostname(card->host), card->rca);
}
device_del(&card->dev);
}
put_device(&card->dev);
}
This function is being invoked from mmc.c file from mmc_attach_mmc() in failure
cases (label remove_card).
Normal SD cards are working, but the sdio seems to be causing issues.
Is this a known problem?
We have tested this since linux 2.6.39-rc5 and now on mainline things are still
the same.
Any idea on where to look for a solution?
Might this have something to do with a timeout which is triggering this?
Thanks
Koen Beel
DISCLAIMER:
Unless indicated otherwise, the information contained in this message is
privileged and confidential, and is intended only for the use of the
addressee(s) named above and others who have been specifically authorized to
receive it. If you are not the intended recipient, you are hereby notified that
any dissemination, distribution or copying of this message and/or attachments
is strictly prohibited. The company accepts no liability for any damage caused
by any virus transmitted by this email. Furthermore, the company does not
warrant a proper and complete transmission of this information, nor does it
accept liability for any delays. If you have received this message in error,
please contact the sender and delete the message. Thank you.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
