The patch extends card_detect and write_protect support to get mx5 family and more scenarios supported. The changes include:
* Turn platform_data from optional to mandatory * Add cd_types and wp_types into platform_data to cover more use cases * Remove the use of flag ESDHC_FLAG_GPIO_FOR_CD * Adjust some machine codes to adopt the platform_data changes With this patch, card_detect and write_protect gets supported on mx51_babbage, and other mx5 machines can easily get there with the least board level configuration added. Signed-off-by: Shawn Guo <[email protected]> --- Changes since v1: * Took the suggestion from Arnaud Patard to add default pdata in imx_add_sdhci_esdhc_imx(), to avoid touching every single board file for the platform_data changes arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 3 +- arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 3 +- arch/arm/mach-imx/mach-mx25_3ds.c | 2 + arch/arm/mach-imx/mach-pcm043.c | 2 + arch/arm/mach-mx5/board-mx51_babbage.c | 27 +++++- .../plat-mxc/devices/platform-sdhci-esdhc-imx.c | 12 ++ arch/arm/plat-mxc/include/mach/esdhc.h | 25 ++++- drivers/mmc/host/sdhci-esdhc-imx.c | 115 +++++++++++--------- 8 files changed, 130 insertions(+), 59 deletions(-) diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 01ebcb3..66e8726 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -225,7 +225,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { static struct esdhc_platform_data sd1_pdata = { .cd_gpio = GPIO_SD1CD, - .wp_gpio = -EINVAL, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; /* diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 558eb52..0f0af02 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -236,7 +236,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { static struct esdhc_platform_data sd1_pdata = { .cd_gpio = GPIO_SD1CD, - .wp_gpio = -EINVAL, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; /* diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 01534bb..7f66a91 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -215,6 +215,8 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = { static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { .wp_gpio = SD1_GPIO_WP, .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, }; static void __init mx25pdk_init(void) diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 163cc31..660ec3e 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -349,6 +349,8 @@ __setup("otg_mode=", pcm043_otg_mode); static struct esdhc_platform_data sd1_pdata = { .wp_gpio = SD1_GPIO_WP, .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, }; /* diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index e54e4bf..4db6cf9 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -34,6 +34,8 @@ #include "devices.h" #include "cpu_op-mx51.h" +#define BABBAGE_ESDHC2_WP IMX_GPIO_NR(1, 5) +#define BABBAGE_ESDHC2_CD IMX_GPIO_NR(1, 6) #define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) #define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27) #define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5) @@ -142,6 +144,10 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD1_DATA1__SD1_DATA1, MX51_PAD_SD1_DATA2__SD1_DATA2, MX51_PAD_SD1_DATA3__SD1_DATA3, + /* CD signal */ + MX51_PAD_GPIO1_0__SD1_CD, + /* WP signal */ + MX51_PAD_GPIO1_1__SD1_WP, /* SD 2 */ MX51_PAD_SD2_CMD__SD2_CMD, @@ -150,6 +156,11 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD2_DATA1__SD2_DATA1, MX51_PAD_SD2_DATA2__SD2_DATA2, MX51_PAD_SD2_DATA3__SD2_DATA3, + /* WP gpio */ + MX51_PAD_GPIO1_5__GPIO1_5, + /* CD gpio */ + MX51_PAD_GPIO1_6__GPIO1_6, + /* eCSPI1 */ MX51_PAD_CSPI1_MISO__ECSPI1_MISO, @@ -331,6 +342,18 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), }; +static const struct esdhc_platform_data esdhc1_pdata __initconst = { + .wp_type = ESDHC_WP_SIGNAL, + .cd_type = ESDHC_CD_SIGNAL, +}; + +static const struct esdhc_platform_data esdhc2_pdata __initconst = { + .wp_gpio = BABBAGE_ESDHC2_WP, + .cd_gpio = BABBAGE_ESDHC2_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, +}; + /* * Board specific initialization. */ @@ -376,8 +399,8 @@ static void __init mx51_babbage_init(void) mxc_iomux_v3_setup_pad(usbh1stp); babbage_usbhub_reset(); - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, NULL); + imx51_add_sdhci_esdhc_imx(0, &esdhc1_pdata); + imx51_add_sdhci_esdhc_imx(1, &esdhc2_pdata); spi_register_board_info(mx51_babbage_spi_board_info, ARRAY_SIZE(mx51_babbage_spi_board_info)); diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c index 6b2940b..a880f73 100644 --- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c @@ -65,6 +65,11 @@ imx53_sdhci_esdhc_imx_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX53 */ +static const struct esdhc_platform_data default_esdhc_pdata __initconst = { + .wp_type = ESDHC_WP_NONE, + .cd_type = ESDHC_CD_NONE, +}; + struct platform_device *__init imx_add_sdhci_esdhc_imx( const struct imx_sdhci_esdhc_imx_data *data, const struct esdhc_platform_data *pdata) @@ -81,6 +86,13 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx( }, }; + /* + * If machine does not provide a pdata, use the default one + * which means none WP/CD support + */ + if (!pdata) + pdata = &default_esdhc_pdata; + return imx_add_platform_device("sdhci-esdhc-imx", data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h index 86003f4..fced348 100644 --- a/arch/arm/plat-mxc/include/mach/esdhc.h +++ b/arch/arm/plat-mxc/include/mach/esdhc.h @@ -10,17 +10,32 @@ #ifndef __ASM_ARCH_IMX_ESDHC_H #define __ASM_ARCH_IMX_ESDHC_H +enum wp_types { + ESDHC_WP_NONE, /* no WP, neither signal nor gpio */ + ESDHC_WP_SIGNAL, /* mmc internal WP signal */ + ESDHC_WP_GPIO, /* external gpio pin for WP */ +}; + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither signal nor gpio */ + ESDHC_CD_SIGNAL, /* mmc internal CD signal */ + ESDHC_CD_GPIO, /* external gpio pin for CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + /** - * struct esdhc_platform_data - optional platform data for esdhc on i.MX - * - * strongly recommended for i.MX25/35, not needed for other variants + * struct esdhc_platform_data - platform data for esdhc on i.MX * - * @wp_gpio: gpio for write_protect (-EINVAL if unused) - * @cd_gpio: gpio for card_detect interrupt (-EINVAL if unused) + * @wp_gpio: gpio for write_protect + * @cd_gpio: gpio for card_detect interrupt + * @wp_type: type of write_protect method (see wp_types enum above) + * @cd_type: type of card_detect method (see cd_types enum above) */ struct esdhc_platform_data { unsigned int wp_gpio; unsigned int cd_gpio; + enum wp_types wp_type; + enum cd_types cd_type; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 79b7a9a..9cba6eb 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -29,7 +29,6 @@ #define SDHCI_VENDOR_SPEC 0xC0 #define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 -#define ESDHC_FLAG_GPIO_FOR_CD (1 << 0) /* * The CMDTYPE of the CMD register (offset 0xE) should be set to * "11" when the STOP CMD12 is issued on imx53 to abort one @@ -70,19 +69,15 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i static u32 esdhc_readl_le(struct sdhci_host *host, int reg) { - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct pltfm_imx_data *imx_data = pltfm_host->priv; + struct esdhc_platform_data *boarddata = + host->mmc->parent->platform_data; - /* fake CARD_PRESENT flag on mx25/35 */ + /* fake CARD_PRESENT flag */ u32 val = readl(host->ioaddr + reg); if (unlikely((reg == SDHCI_PRESENT_STATE) - && (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD))) { - struct esdhc_platform_data *boarddata = - host->mmc->parent->platform_data; - - if (boarddata && gpio_is_valid(boarddata->cd_gpio) - && gpio_get_value(boarddata->cd_gpio)) + && gpio_is_valid(boarddata->cd_gpio))) { + if (gpio_get_value(boarddata->cd_gpio)) /* no card, if a valid gpio says so... */ val &= ~SDHCI_CARD_PRESENT; else @@ -97,12 +92,13 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct pltfm_imx_data *imx_data = pltfm_host->priv; + struct esdhc_platform_data *boarddata = + host->mmc->parent->platform_data; if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE) - && (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD))) + && (boarddata->cd_type == ESDHC_CD_GPIO))) /* * these interrupts won't work with a custom card_detect gpio - * (only applied to mx25/35) */ val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT); @@ -201,6 +197,18 @@ static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host) return clk_get_rate(pltfm_host->clk) / 256 / 16; } +static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host) +{ + struct esdhc_platform_data *boarddata = + host->mmc->parent->platform_data; + + if (gpio_is_valid(boarddata->wp_gpio)) + return gpio_get_value(boarddata->wp_gpio); + else + return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) & + SDHCI_WRITE_PROTECT); +} + static struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl_le, .read_w = esdhc_readw_le, @@ -212,6 +220,7 @@ static struct sdhci_ops sdhci_esdhc_ops = { .get_min_clock = esdhc_pltfm_get_min_clock, .get_max_blk_size = esdhc_pltfm_get_max_blk_size, .get_max_blk_count = esdhc_pltfm_get_max_blk_count, + .get_ro = esdhc_pltfm_get_ro, }; static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { @@ -221,17 +230,6 @@ static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { .ops = &sdhci_esdhc_ops, }; -static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host) -{ - struct esdhc_platform_data *boarddata = - host->mmc->parent->platform_data; - - if (boarddata && gpio_is_valid(boarddata->wp_gpio)) - return gpio_get_value(boarddata->wp_gpio); - else - return -ENOSYS; -} - static irqreturn_t cd_irq(int irq, void *data) { struct sdhci_host *sdhost = (struct sdhci_host *)data; @@ -272,23 +270,33 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) if (!cpu_is_mx25()) host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; - if (cpu_is_mx25() || cpu_is_mx35()) { - /* write_protect can't be routed to controller, use gpio */ - sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro; - } - if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51())) imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT; boarddata = host->mmc->parent->platform_data; - if (boarddata) { + if (!boarddata) { + dev_err(mmc_dev(host->mmc), "no board data!\n"); + err = -EINVAL; + goto no_board_data; + } + + /* write_protect */ + if (boarddata->wp_type == ESDHC_WP_GPIO) { err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP"); if (err) { dev_warn(mmc_dev(host->mmc), - "no write-protect pin available!\n"); - boarddata->wp_gpio = err; + "no write-protect pin available!\n"); + boarddata->wp_gpio = -EINVAL; } + } else + boarddata->wp_gpio = -EINVAL; + /* card_detect */ + if (boarddata->cd_type != ESDHC_CD_GPIO) + boarddata->cd_gpio = -EINVAL; + + switch (boarddata->cd_type) { + case ESDHC_CD_GPIO: err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD"); if (err) { dev_warn(mmc_dev(host->mmc), @@ -296,10 +304,6 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) goto no_card_detect_pin; } - /* i.MX5x has issues to be researched */ - if (!cpu_is_mx25() && !cpu_is_mx35()) - goto not_supported; - err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, mmc_hostname(host->mmc), host); @@ -307,10 +311,19 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) dev_warn(mmc_dev(host->mmc), "request irq error\n"); goto no_card_detect_irq; } + /* fall through */ - imx_data->flags |= ESDHC_FLAG_GPIO_FOR_CD; - /* Now we have a working card_detect again */ + case ESDHC_CD_SIGNAL: + /* we have a working card_detect back */ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; + break; + + case ESDHC_CD_PERMANENT: + host->mmc->caps = MMC_CAP_NONREMOVABLE; + break; + + case ESDHC_CD_NONE: + break; } err = sdhci_add_host(host); @@ -319,16 +332,20 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) return 0; - no_card_detect_irq: - gpio_free(boarddata->cd_gpio); - no_card_detect_pin: - boarddata->cd_gpio = err; - not_supported: - kfree(imx_data); - err_add_host: +err_add_host: + if (gpio_is_valid(boarddata->cd_gpio)) + free_irq(gpio_to_irq(boarddata->cd_gpio), host); +no_card_detect_irq: + if (gpio_is_valid(boarddata->cd_gpio)) + gpio_free(boarddata->cd_gpio); + if (gpio_is_valid(boarddata->wp_gpio)) + gpio_free(boarddata->wp_gpio); +no_card_detect_pin: +no_board_data: clk_disable(pltfm_host->clk); clk_put(pltfm_host->clk); - err_clk_get: +err_clk_get: + kfree(imx_data); sdhci_pltfm_free(pdev); return err; } @@ -343,14 +360,12 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev) sdhci_remove_host(host, dead); - if (boarddata && gpio_is_valid(boarddata->wp_gpio)) + if (gpio_is_valid(boarddata->wp_gpio)) gpio_free(boarddata->wp_gpio); - if (boarddata && gpio_is_valid(boarddata->cd_gpio)) { + if (gpio_is_valid(boarddata->cd_gpio)) { + free_irq(gpio_to_irq(boarddata->cd_gpio), host); gpio_free(boarddata->cd_gpio); - - if (!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)) - free_irq(gpio_to_irq(boarddata->cd_gpio), host); } clk_disable(pltfm_host->clk); -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
