Hi Girish,
Girish K S wrote:
>
> V2- The datatype of the cmd6_timeout is changed from u8 to unsigned int,
> as it can hold a value upto 255*10=2550.
> This patch adds the code to handle the default timeout
> for switch command.
> For eMMC 4.5 devices if timeout is not specified for the switch
> command while accessing a specific field,then the default timeout
> shall be used to timeout. Specification says there is no timeout
> defined while accessing BKOPS_START, SANITIZE_START, FLUSH_CACHE
> field(so these fields are excluded).
>
> Signed-off-by: Girish K S <[email protected]>
> ---
> drivers/mmc/core/mmc.c | 5 +++++
> drivers/mmc/core/mmc_ops.c | 8 ++++++++
> include/linux/mmc/card.h | 1 +
> include/linux/mmc/mmc.h | 4 ++++
> 4 files changed, 18 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 5700b1c..5b9fb6a 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -405,6 +405,11 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8
> *ext_csd)
> if (card->ext_csd.rev >= 5)
> card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
>
> + if (card->ext_csd.rev > 5) {
> + /* (eMMC 4.5)timeout is expressed in units of 10 ms*/
> + card->ext_csd.cmd6_timeout = ext_csd[EXT_CSD_CMD6_TIME]*10;
> + }
> +
> if (ext_csd[EXT_CSD_ERASED_MEM_CONT])
> card->erased_byte = 0xFF;
> else
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index 770c3d0..c4d82f4 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -394,6 +394,14 @@ int mmc_switch(struct mmc_card *card, u8 set, u8
> index, u8 value,
> cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
> cmd.cmd_timeout_ms = timeout_ms;
>
> + /* timeout is not defined for below command indexes (eMMC 4.5) */
> + if ((timeout_ms == 0) &&
> + (card->ext_csd->rev > 5) &&
> + (index != EXT_CSD_BKOPS_START) &&
> + (index != EXT_CSD_SANITIZE_START) &&
> + (index != EXT_CSD_FLUSH_CACHE))
> + cmd.cmd_timeout_ms = card->ext_csd->cmd6_timeout;
> +
mmc_switch doesn't need to take over '0' value for timeout_ms except for
undefined timeout(Background operation, sanitize, etc)
It is possible and good to pass the argument of specific timeout_ms(including
default cmd6 timeout) explicitly rather than '0',
if timeout value for cmd6 is defined.
Then, mmc_switch maybe doesn't need to handle timeout for some exception case.
> err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
> if (err)
> return err;
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index b460fc2..ef88412 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -50,6 +50,7 @@ struct mmc_ext_csd {
> u8 rel_sectors;
> u8 rel_param;
> u8 part_config;
> + unsigned int cmd6_timeout; /* timeout in ms */
> unsigned int part_time; /* Units: ms */
> unsigned int sa_timeout; /* Units: 100ns */
> unsigned int hs_max_dtr;
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 5a794cb..a23f836 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -270,8 +270,11 @@ struct _mmc_csd {
> * EXT_CSD fields
> */
>
> +#define EXT_CSD_FLUSH_CACHE 32 /* R/W */
> #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
> #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
> +#define EXT_CSD_BKOPS_START 164 /* R/W */
> +#define EXT_CSD_SANITIZE_START 165 /* R/W */
> #define EXT_CSD_WR_REL_PARAM 166 /* RO */
> #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
> #define EXT_CSD_PART_CONFIG 179 /* R/W */
> @@ -293,6 +296,7 @@ struct _mmc_csd {
> #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
> #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
> #define EXT_CSD_TRIM_MULT 232 /* RO */
> +#define EXT_CSD_CMD6_TIME 248 /* RO */
>
> /*
> * EXT_CSD field definitions
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
