Hi Girish,
> -----Original Message-----
> From: [email protected] [mailto:linux-mmc-
> [email protected]] On Behalf Of Girish K S
> Sent: Wednesday, November 30, 2011 2:24 PM
> To: [email protected]
> Cc: [email protected]; [email protected];
> [email protected]; Girish K S; Chris Ball
> Subject: [PATCH V5] mmc: core: HS200 mode support for eMMC 4.5
>
> This patch adds the support of the HS200 bus speed for eMMC 4.5
> devices.
> The eMMC 4.5 devices have support for 200MHz bus speed.The mmc core and
> host modules have been touched to add support for this module.
>
> It is necessary to know the card type in the sdhci.c file to add
> support
> for eMMC tuning function. So card.h file is included to import the card
> data structure.
>
> cc: Chris Ball <[email protected]>
> Signed-off-by: Girish K S <[email protected]>
> ---
> Changes in v5:
> Reduced the case statements for better code readability. Removed
> unused macro definitions. Modified the tuning function prototype
> and definition to support tuning for both SD and eMMC cards.
> Changes in v4:
> Rebased onto chris-mmc/mmc-next branch. This patch is
> successfully
> applied on commit with id
> de022ed3fdc14808299b2fa66dbb1ed5ab921912.
> Changes in v3:
> In the previous commits of chris-mmc/mmc-next branch, the patch
> with
> commit id (c0f22a2c92e357e7cb3988b0b13034d70b7461f9) defines
> caps2 for
> more capabilities. This patch version deletes the member
> ext_caps(created
> in my earlier patch) from struct mmc_host and reuses already
> accepted
> caps2 member.
> Changes in v2:
> Rebased to latest chris-mmc/mmc-next branch. Resolved indentation
> problems identified in review. This patch has to be applied
> before
> the patch released for modifying the printk messages.
> Changes in v1:
> Case statements in switch that produce same result have
> been combined to reduce repeated assignments.
> patch recreated after rebase to chris balls mmc-next branch.
>
> drivers/mmc/core/bus.c | 3 +-
> drivers/mmc/core/mmc.c | 77
> ++++++++++++++++++++++++++++++++++++++++----
> drivers/mmc/core/sd.c | 3 +-
> drivers/mmc/core/sdio.c | 4 ++-
> drivers/mmc/host/sdhci.c | 38 +++++++++++++++++-----
> include/linux/mmc/card.h | 3 ++
> include/linux/mmc/host.h | 11 ++++++-
> include/linux/mmc/mmc.h | 66
> ++++++++++++++++++++++++++++++++++++++-
> include/linux/mmc/sdhci.h | 1 +
> 9 files changed, 185 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
> index 5639fdf..83c9f8d 100644
> --- a/drivers/mmc/core/bus.c
> +++ b/drivers/mmc/core/bus.c
> @@ -301,10 +301,11 @@ int mmc_add_card(struct mmc_card *card)
> mmc_card_ddr_mode(card) ? "DDR " : "",
> type);
> } else {
> - printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
> + pr_info("%s: new %s%s%s%s card at address %04x\n",
> mmc_hostname(card->host),
> mmc_card_uhs(card) ? "ultra high speed " :
> (mmc_card_highspeed(card) ? "high speed " : ""),
> + (mmc_card_hs200(card) ? "HS200 " : ""),
> mmc_card_ddr_mode(card) ? "DDR " : "",
> type, card->rca);
> }
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index a1223bd..f4124d6 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -285,6 +285,27 @@ static int mmc_read_ext_csd(struct mmc_card *card,
> u8 *ext_csd)
> }
> card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
> switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
> + case EXT_CSD_CARD_TYPE_SDR_ALL:
> + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V:
> + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V:
> + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
> + break;
> + case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V:
> + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
> + break;
> + case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V:
> + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52:
> + card->ext_csd.hs_max_dtr = 200000000;
> + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
> + break;
> case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
> EXT_CSD_CARD_TYPE_26:
> card->ext_csd.hs_max_dtr = 52000000;
> @@ -699,6 +720,7 @@ static int mmc_init_card(struct mmc_host *host, u32
> ocr,
> {
> struct mmc_card *card;
> int err, ddr = 0;
> + int hs_sdr = 0;
> u32 cid[4];
> unsigned int max_dtr;
> u32 rocr;
> @@ -894,11 +916,16 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> /*
> * Activate high speed (if supported)
> */
> - if ((card->ext_csd.hs_max_dtr != 0) &&
> - (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
> - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> - EXT_CSD_HS_TIMING, 1,
> - card->ext_csd.generic_cmd6_time);
> + if (card->ext_csd.hs_max_dtr != 0) {
> + err = 0;
> + if ((card->ext_csd.hs_max_dtr > 52000000) &&
> + (host->caps2 & MMC_CAP2_HS200))
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_HS_TIMING, 2, 0);
> + else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_HS_TIMING, 1, 0);
> +
> if (err && err != -EBADMSG)
> goto free_card;
>
> @@ -907,7 +934,11 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> mmc_hostname(card->host));
> err = 0;
> } else {
> - mmc_card_set_highspeed(card);
> + if ((card->ext_csd.hs_max_dtr > 52000000) &&
> + (host->caps2 & MMC_CAP2_HS200))
> + mmc_card_set_hs200(card);
> + else
> + mmc_card_set_highspeed(card);
> mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
MMC_TIMING_MMC_HS200 is defined but still not used.
So I guess it should be like this ::
+ if ((card->ext_csd.hs_max_dtr > 52000000) &&
+ (host->caps2 & MMC_CAP2_HS200)) {
+ mmc_card_set_hs200(card);
+ mmc_set_timing(card->host, MMC_TIMING_MMC_HS200)
+ } else {
+ mmc_card_set_highspeed(card);
+ mmc_set_timing(card->host,
MMC_TIMING_MMC_HS)
+ }
> }
> }
> @@ -933,7 +964,7 @@ static int mmc_init_card(struct mmc_host *host, u32
> ocr,
> */
> max_dtr = (unsigned int)-1;
>
> - if (mmc_card_highspeed(card)) {
> + if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
> if (max_dtr > card->ext_csd.hs_max_dtr)
> max_dtr = card->ext_csd.hs_max_dtr;
> } else if (max_dtr > card->csd.max_dtr) {
> @@ -959,6 +990,18 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> }
>
> /*
> + * Indicate HS200 SDR mode (if supported).
> + */
> + if (mmc_card_hs200(card)) {
> + if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V)
> + && (host->caps2 & MMC_CAP2_HS200_1_8V_SDR))
> + hs_sdr = MMC_1_8V_SDR_MODE;
> + else if ((card->ext_csd.card_type &
> EXT_CSD_CARD_TYPE_SDR_1_2V)
> + && (host->caps2 & MMC_CAP2_HS200_1_2V_SDR))
> + hs_sdr = MMC_1_2V_SDR_MODE;
> + }
> +
> + /*
> * Activate wide bus and DDR (if supported).
> */
> if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
> @@ -998,6 +1041,17 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> if (!err) {
> mmc_set_bus_width(card->host, bus_width);
>
> + if ((host->caps2 & MMC_CAP2_HS200) &&
> + card->host->ops->execute_tuning)
> + err = card->host->ops-> \
> + execute_tuning(card->host,
> +
MMC_SEND_TUNING_BLOCK_HS200);
execute_tuning should be done right after the timing is changed to HS200 and
clock rate is changed to 200Mhz. This is not the correct sequence to call
the execute_tuning().
> +
> + if (err) {
> + pr_warning("tuning execution
failed\n");
> + continue;
> + }
> +
> /*
> * If controller can't handle bus width
test,
> * compare ext_csd previously read in 1 bit
> mode
> @@ -1056,6 +1110,15 @@ static int mmc_init_card(struct mmc_host *host,
> u32 ocr,
> mmc_card_set_ddr_mode(card);
> mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50);
> mmc_set_bus_width(card->host, bus_width);
> + } else if (hs_sdr) {
> + if (hs_sdr == EXT_CSD_CARD_TYPE_SDR_1_2V) {
> + err = mmc_set_signal_voltage(host,
> + MMC_SIGNAL_VOLTAGE_120, 0);
> + if (err)
> + goto err;
> + }
> + mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
> + mmc_set_bus_width(card->host, bus_width);
> }
> }
>
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 1d5a3bd..c1d3ee3 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -660,7 +660,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card
> *card)
>
> /* SPI mode doesn't define CMD19 */
> if (!mmc_host_is_spi(card->host) && card->host->ops-
> >execute_tuning)
> - err = card->host->ops->execute_tuning(card->host);
> + err = card->host->ops->execute_tuning(card->host, \
> +
MMC_SEND_TUNING_BLOCK);
>
> out:
> kfree(status);
> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
> index 8c04f7f..8ef8817 100644
> --- a/drivers/mmc/core/sdio.c
> +++ b/drivers/mmc/core/sdio.c
> @@ -14,6 +14,7 @@
>
> #include <linux/mmc/host.h>
> #include <linux/mmc/card.h>
> +#include <linux/mmc/mmc.h>
> #include <linux/mmc/sdio.h>
> #include <linux/mmc/sdio_func.h>
> #include <linux/mmc/sdio_ids.h>
> @@ -556,7 +557,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card
> *card)
>
> /* Initialize and start re-tuning timer */
> if (!mmc_host_is_spi(card->host) && card->host->ops-
> >execute_tuning)
> - err = card->host->ops->execute_tuning(card->host);
> + err = card->host->ops->execute_tuning(card->host,
> +
MMC_SEND_TUNING_BLOCK);
>
> out:
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index a7c2311..13d74bb 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -49,7 +49,7 @@ static void sdhci_finish_data(struct sdhci_host *);
>
> static void sdhci_send_command(struct sdhci_host *, struct mmc_command
> *);
> static void sdhci_finish_command(struct sdhci_host *);
> -static int sdhci_execute_tuning(struct mmc_host *mmc);
> +static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
> static void sdhci_tuning_timer(unsigned long data);
>
> #ifdef CONFIG_PM_RUNTIME
> @@ -1016,7 +1016,8 @@ static void sdhci_send_command(struct sdhci_host
> *host, struct mmc_command *cmd)
> flags |= SDHCI_CMD_INDEX;
>
> /* CMD19 is special in that the Data Present Select should be set
> */
> - if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK))
> + if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK) ||
> + (cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))
> flags |= SDHCI_CMD_DATA;
>
> sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags),
> SDHCI_COMMAND);
> @@ -1287,7 +1288,7 @@ static void sdhci_request(struct mmc_host *mmc,
> struct mmc_request *mrq)
> if ((host->flags & SDHCI_NEEDS_RETUNING) &&
> !(present_state & (SDHCI_DOING_WRITE |
> SDHCI_DOING_READ))) {
> spin_unlock_irqrestore(&host->lock, flags);
> - sdhci_execute_tuning(mmc);
> + sdhci_execute_tuning(mmc, mrq->cmd->opcode);
> spin_lock_irqsave(&host->lock, flags);
>
> /* Restore original mmc_request structure */
> @@ -1673,7 +1674,7 @@ static int
> sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
> return err;
> }
>
> -static int sdhci_execute_tuning(struct mmc_host *mmc)
> +static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> {
> struct sdhci_host *host;
> u16 ctrl;
> @@ -1694,10 +1695,13 @@ static int sdhci_execute_tuning(struct mmc_host
> *mmc)
> * Host Controller needs tuning only in case of SDR104 mode
> * and for SDR50 mode when Use Tuning for SDR50 is set in
> * Capabilities register.
> + * If the Host Controller supports the HS200 mode then tuning
> + * function has to be executed.
> */
> if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
> (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
> - (host->flags & SDHCI_SDR50_NEEDS_TUNING)))
> + (host->flags & SDHCI_SDR50_NEEDS_TUNING)) ||
> + (host->flags & SDHCI_HS200_NEEDS_TUNING))
> ctrl |= SDHCI_CTRL_EXEC_TUNING;
> else {
> spin_unlock(&host->lock);
> @@ -1733,7 +1737,7 @@ static int sdhci_execute_tuning(struct mmc_host
> *mmc)
> if (!tuning_loop_counter && !timeout)
> break;
>
> - cmd.opcode = MMC_SEND_TUNING_BLOCK;
> + cmd.opcode = opcode;
> cmd.arg = 0;
> cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
> cmd.retries = 0;
> @@ -1748,7 +1752,17 @@ static int sdhci_execute_tuning(struct mmc_host
> *mmc)
> * block to the Host Controller. So we set the block size
> * to 64 here.
> */
> - sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
> SDHCI_BLOCK_SIZE);
> + if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) {
> + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
> + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
> + SDHCI_BLOCK_SIZE);
> + else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
> + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
> + SDHCI_BLOCK_SIZE);
> + } else {
> + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
> + SDHCI_BLOCK_SIZE);
> + }
>
> /*
> * The tuning block is sent by the card to the host
> controller.
> @@ -2131,12 +2145,14 @@ static void sdhci_show_adma_error(struct
> sdhci_host *host) { }
>
> static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> {
> + u32 command;
> BUG_ON(intmask == 0);
>
> /* CMD19 generates _only_ Buffer Read Ready interrupt */
> if (intmask & SDHCI_INT_DATA_AVAIL) {
> - if (SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) ==
> - MMC_SEND_TUNING_BLOCK) {
> + command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
> + if ((command == MMC_SEND_TUNING_BLOCK) ||
> + (command == MMC_SEND_TUNING_BLOCK_HS200)) {
> host->tuning_done = 1;
> wake_up(&host->buf_ready_int);
> return;
> @@ -2741,6 +2757,10 @@ int sdhci_add_host(struct sdhci_host *host)
> if (caps[1] & SDHCI_USE_SDR50_TUNING)
> host->flags |= SDHCI_SDR50_NEEDS_TUNING;
>
> + /* Does the host needs tuning for HS200? */
> + if (mmc->caps2 & MMC_CAP2_HS200)
> + host->flags |= SDHCI_HS200_NEEDS_TUNING;
> +
> /* Driver Type(s) (A, C, D) supported by the host */
> if (caps[1] & SDHCI_DRIVER_TYPE_A)
> mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 534974c..e76f649 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -209,6 +209,7 @@ struct mmc_card {
> #define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high
> speed mode */
> #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra
> high speed mode */
> #define MMC_CARD_SDXC (1<<6) /* card is SDXC */
> +#define MMC_STATE_HIGHSPEED_200 (1<<7) /* card is in HS200
> mode */
> unsigned int quirks; /* card quirks */
> #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0
> writes outside of the VS CCCR range */
> #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func-
> >cur_blksize */
> @@ -365,6 +366,7 @@ static inline void __maybe_unused
> remove_quirk(struct mmc_card *card, int data)
> #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT)
> #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
> #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
> +#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200)
> #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
> #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
> #define mmc_card_uhs(c) ((c)->state &
> MMC_STATE_ULTRAHIGHSPEED)
> @@ -374,6 +376,7 @@ static inline void __maybe_unused
> remove_quirk(struct mmc_card *card, int data)
> #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
> #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
> #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
> +#define mmc_card_set_hs200(c) ((c)->state |=
> MMC_STATE_HIGHSPEED_200)
> #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
> #define mmc_card_set_ddr_mode(c) ((c)->state |=
> MMC_STATE_HIGHSPEED_DDR)
> #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 706f722..5eac57a 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -50,6 +50,7 @@ struct mmc_ios {
>
> #define MMC_TIMING_LEGACY 0
> #define MMC_TIMING_MMC_HS 1
> +#define MMC_TIMING_MMC_HS200 2
> #define MMC_TIMING_SD_HS 2
> #define MMC_TIMING_UHS_SDR12 MMC_TIMING_LEGACY
> #define MMC_TIMING_UHS_SDR25 MMC_TIMING_SD_HS
> @@ -60,6 +61,8 @@ struct mmc_ios {
> #define MMC_SDR_MODE 0
> #define MMC_1_2V_DDR_MODE 1
> #define MMC_1_8V_DDR_MODE 2
> +#define MMC_1_2V_SDR_MODE 3
> +#define MMC_1_8V_SDR_MODE 4
>
> unsigned char signal_voltage; /* signalling voltage
> (1.8V or 3.3V) */
>
> @@ -148,7 +151,9 @@ struct mmc_host_ops {
> void (*init_card)(struct mmc_host *host, struct mmc_card *card);
>
> int (*start_signal_voltage_switch)(struct mmc_host *host,
> struct mmc_ios *ios);
> - int (*execute_tuning)(struct mmc_host *host);
> +
> + /* The tuning command opcode value is different for SD and eMMC
> cards */
> + int (*execute_tuning)(struct mmc_host *host, u32 opcode);
> void (*enable_preset_value)(struct mmc_host *host, bool enable);
> int (*select_drive_strength)(unsigned int max_dtr, int
> host_drv, int card_drv);
> void (*hw_reset)(struct mmc_host *host);
> @@ -242,6 +247,10 @@ struct mmc_host {
> #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */
> #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff
> supported */
> #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads
> don't work */
> +#define MMC_CAP2_HS200_1_8V_SDR (1 << 4) /* can support */
> +#define MMC_CAP2_HS200_1_2V_SDR (1 << 5) /* can support */
> +#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
> + MMC_CAP2_HS200_1_2V_SDR)
>
> mmc_pm_flag_t pm_caps; /* supported pm features */
> unsigned int power_notify_type;
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 0e71356..7996272 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -51,6 +51,7 @@
> #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1
> */
> #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1
> */
> #define MMC_SEND_TUNING_BLOCK 19 /* adtc R1
> */
> +#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
>
> /* class 3 */
> #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1
> */
> @@ -333,13 +334,76 @@ struct _mmc_csd {
>
> #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
> #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
> -#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */
> +#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */
> #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz
> */
> /* DDR mode @1.8V or 3V I/O */
> #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz
> */
> /* DDR mode @1.2V I/O */
> #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
> | EXT_CSD_CARD_TYPE_DDR_1_2V)
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at
> 200MHz */
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at
> 200MHz */
> + /* SDR mode @1.2V I/O */
> +
> +#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_SDR_1_2V)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_ALL (EXT_CSD_CARD_TYPE_SDR_200 \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_ALL
> (EXT_CSD_CARD_TYPE_SDR_1_2V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_ALL
> (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_52 \
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V
> (EXT_CSD_CARD_TYPE_SDR_1_2V \
> + | EXT_CSD_CARD_TYPE_DDR_1_8V
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V
> (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_DDR_1_8V
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V
> (EXT_CSD_CARD_TYPE_SDR_1_2V \
> + | EXT_CSD_CARD_TYPE_DDR_1_2V
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V
> (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_DDR_1_2V
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52
> (EXT_CSD_CARD_TYPE_SDR_1_2V \
> + | EXT_CSD_CARD_TYPE_DDR_52
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52
> (EXT_CSD_CARD_TYPE_SDR_1_8V \
> + | EXT_CSD_CARD_TYPE_DDR_52
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V
> (EXT_CSD_CARD_TYPE_SDR_200 \
> + | EXT_CSD_CARD_TYPE_DDR_1_8V
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V
> (EXT_CSD_CARD_TYPE_SDR_200 \
> + | EXT_CSD_CARD_TYPE_DDR_1_2V
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
> +
> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52 (EXT_CSD_CARD_TYPE_SDR_200
> \
> + | EXT_CSD_CARD_TYPE_DDR_52
\
> + | EXT_CSD_CARD_TYPE_52
\
> + | EXT_CSD_CARD_TYPE_26)
>
> #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
> #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
> index e4b6935..d9a2222 100644
> --- a/include/linux/mmc/sdhci.h
> +++ b/include/linux/mmc/sdhci.h
> @@ -121,6 +121,7 @@ struct sdhci_host {
> #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
> #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
> #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
> +#define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */
>
> unsigned int version; /* SDHCI spec. version */
>
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
