Use the usleep_range() to simplify mmc_delay() and give some more
accuracy to it - but with an exception of mmc_card_sleepawake():
for the hosts with very small (<100us) sleep/awake timeout, it's
value is rounded up to 100us so usleep_range() always makes sense.
---
drivers/mmc/core/core.h | 8 ++------
drivers/mmc/core/mmc_ops.c | 9 ++++++---
2 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 3bdafbc..fbd2cba 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -48,12 +48,8 @@ void mmc_power_off(struct mmc_host *host);
static inline void mmc_delay(unsigned int ms)
{
- if (ms < 1000 / HZ) {
- cond_resched();
- mdelay(ms);
- } else {
- msleep(ms);
- }
+ unsigned long us = ms * USEC_PER_MSEC;
+ usleep_range(us, us + 1000);
}
void mmc_rescan(struct work_struct *work);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 4d41fa9..457443a 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -82,9 +82,12 @@ int mmc_card_sleepawake(struct mmc_host *host, int sleep)
* SEND_STATUS command to poll the status because that command (and most
* others) is invalid while the card sleeps.
*/
- if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
- mmc_delay(DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000));
-
+ if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY)) {
+ /* JEDEC MMCA 4.41 specifies the timeout value is in
200ns..838.86ms
+ range, which is rounded it up to 100us here. */
+ unsigned long us = DIV_ROUND_UP(card->ext_csd.sa_timeout, 1000);
+ usleep_range(us, us + 100);
+ }
if (!sleep)
err = mmc_select_card(card);
--
1.7.7.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
