On 01/25/2012 02:12 PM, Seungwon Jeon wrote:

> Jaehoon Chung <[email protected]> wrote:
>> Hi Mr Jeon..
>>
>> Are Pre_req and post_req used with only the IDMAC..?
> Currently internal dma is considered.
> Do you use system dma operation?

I used the IDMAC. 
My means...other dma system can also use this feature, right?
So i just asked to you..

Best Regards,
Jaehoon Chung

> 
>>
>> On 01/20/2012 01:05 PM, Seungwon Jeon wrote:
>>
>>> This patch implements pre_req and post_req in dw_mmc
>>> to support asynchronous mmc request.
>>>
>>> Signed-off-by: Seungwon Jeon <[email protected]>
>>> ---
>>> NOTE:
>>>     Performance gains the following.
>>>     Sequential read and write improve 23% and 5% respectively.
>>>
>>>  drivers/mmc/host/dw_mmc.c |  136 
>>> ++++++++++++++++++++++++++++++++++++---------
>>>  1 files changed, 109 insertions(+), 27 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index 0e34279..1fb8114 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -297,14 +297,24 @@ static void dw_mci_stop_dma(struct dw_mci *host)
>>>  }
>>>
>>>  #ifdef CONFIG_MMC_DW_IDMAC
>>> +static int dw_mci_get_dma_dir(struct mmc_data *data)
>>> +{
>>> +   if (data->flags & MMC_DATA_WRITE)
>>> +           return DMA_TO_DEVICE;
>>> +   else
>>> +           return DMA_FROM_DEVICE;
>>> +}
>>> +
>>>  static void dw_mci_dma_cleanup(struct dw_mci *host)
>>>  {
>>>     struct mmc_data *data = host->data;
>>>
>>>     if (data)
>>> -           dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len,
>>> -                        ((data->flags & MMC_DATA_WRITE)
>>> -                         ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
>>> +           if (!data->host_cookie)
>>> +                   dma_unmap_sg(&host->pdev->dev,
>>> +                                data->sg,
>>> +                                data->sg_len,
>>> +                                dw_mci_get_dma_dir(data));
>>>  }
>>
>>              if (!data->host_cookie)
>>                      dma_unmap_sg(&host->pdev->dev,
>>                                   data->sg, data->sg_len,
>>                                   dw_mci_get_dma_dir(data));
>> also the below code..
> Sorry... What's mean?
> 
> Thanks,
> Seungwon Jeon.
>>
>> Best Regards,
>> Jaehoon Chung
>>
>>>
>>>  static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>>> @@ -420,26 +430,15 @@ static int dw_mci_idmac_init(struct dw_mci *host)
>>>     return 0;
>>>  }
>>>
>>> -static struct dw_mci_dma_ops dw_mci_idmac_ops = {
>>> -   .init = dw_mci_idmac_init,
>>> -   .start = dw_mci_idmac_start_dma,
>>> -   .stop = dw_mci_idmac_stop_dma,
>>> -   .complete = dw_mci_idmac_complete_dma,
>>> -   .cleanup = dw_mci_dma_cleanup,
>>> -};
>>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>> -
>>> -static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data 
>>> *data)
>>> +static int dw_mci_pre_dma_transfer(struct dw_mci *host,
>>> +                              struct mmc_data *data,
>>> +                              bool next)
>>>  {
>>>     struct scatterlist *sg;
>>> -   unsigned int i, direction, sg_len;
>>> -   u32 temp;
>>> -
>>> -   host->using_dma = 0;
>>> +   unsigned int i, sg_len;
>>>
>>> -   /* If we don't have a channel, we can't do DMA */
>>> -   if (!host->use_dma)
>>> -           return -ENODEV;
>>> +   if (!next && data->host_cookie)
>>> +           return data->host_cookie;
>>>
>>>     /*
>>>      * We don't do DMA on "complex" transfers, i.e. with
>>> @@ -448,6 +447,7 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, 
>>> struct mmc_data *data)
>>>      */
>>>     if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
>>>             return -EINVAL;
>>> +
>>>     if (data->blksz & 3)
>>>             return -EINVAL;
>>>
>>> @@ -456,15 +456,95 @@ static int dw_mci_submit_data_dma(struct dw_mci 
>>> *host, struct mmc_data *data)
>>>                     return -EINVAL;
>>>     }
>>>
>>> -   host->using_dma = 1;
>>> +   sg_len = dma_map_sg(&host->pdev->dev,
>>> +                       data->sg,
>>> +                       data->sg_len,
>>> +                       dw_mci_get_dma_dir(data));
>>> +   if (sg_len == 0)
>>> +           return -EINVAL;
>>>
>>> -   if (data->flags & MMC_DATA_READ)
>>> -           direction = DMA_FROM_DEVICE;
>>> -   else
>>> -           direction = DMA_TO_DEVICE;
>>> +   if (next)
>>> +           data->host_cookie = sg_len;
>>> +
>>> +   return sg_len;
>>> +}
>>>
>>> -   sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len,
>>> -                       direction);
>>> +static void dw_mci_pre_req(struct mmc_host *mmc,
>>> +                      struct mmc_request *mrq,
>>> +                      bool is_first_req)
>>> +{
>>> +   struct dw_mci_slot *slot = mmc_priv(mmc);
>>> +   struct mmc_data *data = mrq->data;
>>> +
>>> +   if (!data)
>>> +           return;
>>> +
>>> +   if (data->host_cookie) {
>>> +           data->host_cookie = 0;
>>> +           return;
>>> +   }
>>> +
>>> +   if (slot->host->use_dma) {
>>> +           if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
>>> +                   data->host_cookie = 0;
>>> +   }
>>> +}
>>> +
>>> +static void dw_mci_post_req(struct mmc_host *mmc,
>>> +                       struct mmc_request *mrq,
>>> +                       int err)
>>> +{
>>> +   struct dw_mci_slot *slot = mmc_priv(mmc);
>>> +   struct mmc_data *data = mrq->data;
>>> +
>>> +   if (!data)
>>> +           return;
>>> +
>>> +   if (slot->host->use_dma) {
>>> +           if (data->host_cookie)
>>> +                   dma_unmap_sg(&slot->host->pdev->dev,
>>> +                                data->sg,
>>> +                                data->sg_len,
>>> +                                dw_mci_get_dma_dir(data));
>>> +           data->host_cookie = 0;
>>> +   }
>>> +}
>>> +
>>> +static struct dw_mci_dma_ops dw_mci_idmac_ops = {
>>> +   .init = dw_mci_idmac_init,
>>> +   .start = dw_mci_idmac_start_dma,
>>> +   .stop = dw_mci_idmac_stop_dma,
>>> +   .complete = dw_mci_idmac_complete_dma,
>>> +   .cleanup = dw_mci_dma_cleanup,
>>> +};
>>> +#else
>>> +static int dw_mci_pre_dma_transfer(struct dw_mci *host,
>>> +                              struct mmc_data *data,
>>> +                              bool next)
>>> +{
>>> +   return -ENOSYS;
>>> +}
>>> +
>>> +#define dw_mci_pre_req     NULL
>>> +#define dw_mci_post_req    NULL
>>> +#endif /* CONFIG_MMC_DW_IDMAC */
>>> +
>>> +static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data 
>>> *data)
>>> +{
>>> +   int sg_len;
>>> +   u32 temp;
>>> +
>>> +   host->using_dma = 0;
>>> +
>>> +   /* If we don't have a channel, we can't do DMA */
>>> +   if (!host->use_dma)
>>> +           return -ENODEV;
>>> +
>>> +   sg_len = dw_mci_pre_dma_transfer(host, data, 0);
>>> +   if (sg_len < 0)
>>> +           return sg_len;
>>> +
>>> +   host->using_dma = 1;
>>>
>>>     dev_vdbg(&host->pdev->dev,
>>>              "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
>>> @@ -795,6 +875,8 @@ static void dw_mci_enable_sdio_irq(struct mmc_host 
>>> *mmc, int enb)
>>>
>>>  static const struct mmc_host_ops dw_mci_ops = {
>>>     .request                = dw_mci_request,
>>> +   .pre_req                = dw_mci_pre_req,
>>> +   .post_req               = dw_mci_post_req,
>>>     .set_ios                = dw_mci_set_ios,
>>>     .get_ro                 = dw_mci_get_ro,
>>>     .get_cd                 = dw_mci_get_cd,
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to [email protected]
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to