Dmitry Shmidt <[email protected]>
> On Mon, May 21, 2012 at 9:01 PM, Seungwon Jeon <[email protected]> wrote:
> > IDMAC may not be cleaned in driver probe if it has
> > been already used in boot time. So IDMAC needs sw
> > reset newly. And DMA interface reset precedes the
> > internal DMAC reset. Additionally SDMMC_IDMAC_SWRESET
> > is replaced with magic code.
> >
> > Signed-off-by: Seungwon Jeon <[email protected]>
> > ---
> > drivers/mmc/host/dw_mmc.c | 24 ++++++++++++------------
> > 1 files changed, 12 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> > index b46faf0..98fe023 100644
> > --- a/drivers/mmc/host/dw_mmc.c
> > +++ b/drivers/mmc/host/dw_mmc.c
> > @@ -418,6 +418,8 @@ static int dw_mci_idmac_init(struct dw_mci *host)
> > p->des3 = host->sg_dma;
> > p->des0 = IDMAC_DES0_ER;
> >
> > + mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET);
> > +
> > /* Mask out interrupts - get Tx & Rx complete only */
> > mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
> > SDMMC_IDMAC_INT_TI);
> > @@ -1724,7 +1726,8 @@ static void dw_mci_work_routine_card(struct
> > work_struct *work)
> >
> > #ifdef CONFIG_MMC_DW_IDMAC
> > ctrl = mci_readl(host, BMOD);
> > - ctrl |= 0x01; /* Software reset of DMA */
> > + /* Software reset of DMA */
> > + ctrl |= SDMMC_IDMAC_SWRESET;
> > mci_writel(host, BMOD, ctrl);
> > #endif
> >
> > @@ -1949,10 +1952,6 @@ int dw_mci_probe(struct dw_mci *host)
> > spin_lock_init(&host->lock);
> > INIT_LIST_HEAD(&host->queue);
> >
> > -
> > - host->dma_ops = host->pdata->dma_ops;
> > - dw_mci_init_dma(host);
> > -
> > /*
> > * Get the host data width - this assumes that HCON has been set with
> > * the correct values.
> > @@ -1980,10 +1979,11 @@ int dw_mci_probe(struct dw_mci *host)
> > }
> >
> > /* Reset all blocks */
> > - if (!mci_wait_reset(&host->dev, host)) {
> > - ret = -ENODEV;
> > - goto err_dmaunmap;
> > - }
> > + if (!mci_wait_reset(&host->dev, host))
> > + return -ENODEV;
>
> You would probably want something like this:
> + if (!mci_wait_reset(&host->dev, host)) {
> + ret = -ENODEV;
> + goto err_free_hclk;
> + }
This is applicable to only our local branch.
>
> > +
> > + host->dma_ops = host->pdata->dma_ops;
> > + dw_mci_init_dma(host);
> >
> > /* Clear the interrupts for the host controller */
> > mci_writel(host, RINTSTS, 0xFFFFFFFF);
> > @@ -2169,14 +2169,14 @@ int dw_mci_resume(struct dw_mci *host)
> > if (host->vmmc)
> > regulator_enable(host->vmmc);
> >
> > - if (host->dma_ops->init)
> > - host->dma_ops->init(host);
> > -
> > if (!mci_wait_reset(&host->dev, host)) {
> > ret = -ENODEV;
> > return ret;
> > }
> >
> > + if (host->dma_ops->init)
> > + host->dma_ops->init(host);
> > +
> > /* Restore the old value at FIFOTH register */
> > mci_writel(host, FIFOTH, host->fifoth_val);
> >
> > --
> > 1.7.0.4
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
