From: Philip Rakity <[email protected]> Power needs to be removed from the card when switching to 1.8v fails.
If a regulator is used to control vmmc we need to turn the regulator off and then back on otherwise power will not be removed from the card. Signed-off-by: Philip Rakity <[email protected]> --- drivers/mmc/host/sdhci.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index f4b8b4d..ef4231a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1663,11 +1663,15 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, pwr = sdhci_readb(host, SDHCI_POWER_CONTROL); pwr &= ~SDHCI_POWER_ON; sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + if (host->vmmc) + regulator_disable(host->vmmc); /* Wait for 1ms as per the spec */ usleep_range(1000, 1500); pwr |= SDHCI_POWER_ON; sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + if (host->vmmc) + regulator_enable(host->vmmc); pr_info(DRIVER_NAME ": Switching to 1.8V signalling " "voltage failed, retrying with S18R set to 0\n"); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
