On 25 September 2012 19:38, Kevin Liu <[email protected]> wrote:
> From: Kevin Liu <[email protected]>
>
> Use voltage range as below rather than a specific value
> 3.3v: (3.2v, 3.4v)
> 3.0v: (2.9v, 3.1v)
> 1.8v: (1.65v, 1.95v)
Any specific reason to give range and not specific value?
>
> Signed-off-by: Jialing Fu <[email protected]>
> Signed-off-by: Kevin Liu <[email protected]>
> ---
> drivers/mmc/host/sdhci.c | 18 +++++++++---------
> 1 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 2f844e5..f50efa6 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1628,7 +1628,7 @@ static int sdhci_do_3_3v_signal_voltage_switch(struct
> sdhci_host *host,
> sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
>
> if (host->vqmmc) {
> - ret = regulator_set_voltage(host->vqmmc, 3300000, 3300000);
> + ret = regulator_set_voltage(host->vqmmc, 3200000, 3400000);
> if (ret) {
> pr_warning("%s: Switching to 3.3V signalling voltage "
> " failed\n", mmc_hostname(host->mmc));
> @@ -1672,7 +1672,7 @@ static int sdhci_do_1_8v_signal_voltage_switch(struct
> sdhci_host *host,
> */
> if (host->vqmmc)
> ret = regulator_set_voltage(host->vqmmc,
> - 1800000, 1800000);
> + 1650000, 1950000);
> else
> ret = 0;
>
> @@ -2856,7 +2856,7 @@ int sdhci_add_host(struct sdhci_host *host)
> pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc));
> host->vqmmc = NULL;
> }
> - else if (regulator_is_supported_voltage(host->vqmmc, 1800000,
> 1800000))
> + else if (regulator_is_supported_voltage(host->vqmmc, 1650000,
> 1950000))
> regulator_enable(host->vqmmc);
> else
> caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
> @@ -2927,16 +2927,16 @@ int sdhci_add_host(struct sdhci_host *host)
>
> #ifdef CONFIG_REGULATOR
> if (host->vmmc) {
> - ret = regulator_is_supported_voltage(host->vmmc, 3300000,
> - 3300000);
> + ret = regulator_is_supported_voltage(host->vmmc, 3200000,
> + 3400000);
> if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
> caps[0] &= ~SDHCI_CAN_VDD_330;
> - ret = regulator_is_supported_voltage(host->vmmc, 3000000,
> - 3000000);
> + ret = regulator_is_supported_voltage(host->vmmc, 2900000,
> + 3100000);
> if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
> caps[0] &= ~SDHCI_CAN_VDD_300;
> - ret = regulator_is_supported_voltage(host->vmmc, 1800000,
> - 1800000);
> + ret = regulator_is_supported_voltage(host->vmmc, 1650000,
> + 1950000);
> if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
> caps[0] &= ~SDHCI_CAN_VDD_180;
> }
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
