Hi Johan,
On Thu, Sep 20 2012, Johan Rudholm wrote:
> Signed-off-by: Johan Rudholm <[email protected]>
> ---
> drivers/mmc/core/core.c | 2 +-
> drivers/mmc/core/core.h | 1 +
> drivers/mmc/core/sd.c | 8 ++++++--
> 3 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 3779431..671986a 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -1346,7 +1346,7 @@ static void mmc_poweroff_notify(struct mmc_host *host)
> * If a host does all the power sequencing itself, ignore the
> * initial MMC_POWER_UP stage.
> */
> -static void mmc_power_up(struct mmc_host *host)
> +void mmc_power_up(struct mmc_host *host)
> {
> int bit;
>
> diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
> index 3bdafbc..5a5170d 100644
> --- a/drivers/mmc/core/core.h
> +++ b/drivers/mmc/core/core.h
> @@ -45,6 +45,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int
> signal_voltage,
> void mmc_set_timing(struct mmc_host *host, unsigned int timing);
> void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
> void mmc_power_off(struct mmc_host *host);
> +void mmc_power_up(struct mmc_host *host);
>
> static inline void mmc_delay(unsigned int ms)
> {
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 74972c2..9a165451 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -720,6 +720,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32
> *cid, u32 *rocr)
> * state. We wait 1ms to give cards time to
> * respond.
> */
> +try_again:
> mmc_go_idle(host);
>
> /*
> @@ -748,7 +749,6 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32
> *cid, u32 *rocr)
> if (max_current > 150)
> ocr |= SD_OCR_XPC;
>
> -try_again:
> err = mmc_send_app_op_cond(host, ocr, rocr);
> if (err)
> return err;
> @@ -761,7 +761,11 @@ try_again:
> ((*rocr & 0x41000000) == 0x41000000)) {
> err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
> true);
> if (err) {
> - ocr &= ~SD_OCR_S18R;
> + /* Power cycle card */
> + pr_warning("%s: Signal voltage switch failed, "
> + "power cycling card\n", mmc_hostname(host));
> + mmc_power_off(host);
> + mmc_power_up(host);
> goto try_again;
> }
> }
Hasn't the card already been power-cycled inside mmc_set_signal_voltage's
call to sdhci_do_start_signal_voltage_switch()?
/*
* If we are here, that means the switch to 1.8V signaling
* failed. We power cycle the card, and retry initialization
* sequence by setting S18R to 0.
*/
pwr = sdhci_readb(host, SDHCI_POWER_CONTROL);
pwr &= ~SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
(If you're going to do it here instead, should we remove this code from
sdhci.c?)
Dan, maybe you could see if this patch (there's a 1/2 patch too) solves
your UHS problem?
Thanks,
- Chris.
--
Chris Ball <[email protected]> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
