Friday, October 26, 2012, Jaehoon Chung <[email protected]> > I think right that dw_mci_setup_bus() is called into set_ios(). > Actually clock is enabled at dw_mci_setup_bus() in now. > Then didn't ensure to wait the 74clock. This will be ensured when first command is sent with 'send_initialization' flag of CMD register. But I feel this change is reasonable. Looks good to me if commit message is modified.
Acked-by: Seungwon Jeon <[email protected]> Thanks. Seungwon Jeon > To stable clock is relocated the position into dw_mci_set_ios(). > > Signed-off-by: Jaehoon Chung <[email protected]> > Signed-off-by: Kyungmin Park <[email protected]> > --- > drivers/mmc/host/dw_mmc.c | 6 +++--- > 1 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 250aa18..9001844 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -682,9 +682,6 @@ static void __dw_mci_start_request(struct dw_mci *host, > if (host->pdata->select_slot) > host->pdata->select_slot(slot->id); > > - /* Slot specific timing and width adjustment */ > - dw_mci_setup_bus(slot); > - > host->cur_slot = slot; > host->mrq = mrq; > > @@ -810,6 +807,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct > mmc_ios *ios) > if (slot->host->drv_data->set_ios) > slot->host->drv_data->set_ios(slot->host, ios); > > + /* Slot specific timing and width adjustment */ > + dw_mci_setup_bus(slot); > + > switch (ios->power_mode) { > case MMC_POWER_UP: > set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags); > -- > 1.7.4.1 > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
