On Wed, Dec 12, 2012 at 12:39 PM, Kevin Liu <[email protected]> wrote:
>> 3) In the suspend() callback, sleep until the clock indicates
>> that the card is declocked with something like:
>> while (clk_is_enabled(host->clk)) { sleep(1) }
>> However the clk framework does not have clk_is_enabled()
>> so you'd either have to add that or use a local atomic
>> variable host_clk_enabled set in (2).
>>
>> Should work, I think?
>
> Since we use pm runtime with delay setting to 50ms, so there is no such
> problem?
Depends on the clock to the card I guess?
The MMCI is default-clocked at 515633 Hz, so period
time T = 1/515633 and for 8 clock cycles on the card clock
it needs 8/515633 ~ 0.01 ms so it's pretty sufficient :-)
OK I'm in on using runtime PM then.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
