On 20 December 2012 12:11, Kevin Liu <[email protected]> wrote:
> Signed-off-by: Jialing Fu <[email protected]>
> Signed-off-by: Kevin Liu <[email protected]>
> ---
> drivers/mmc/host/sdhci-pxav3.c | 89 ++++++++++++++++++++++++++++++++++++++-
> 1 files changed, 86 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index fad0966..ba3a524 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -32,10 +32,15 @@
> #include <linux/of.h>
> #include <linux/of_device.h>
> #include <linux/of_gpio.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
> +#include <plat/pm.h>
>
> #include "sdhci.h"
> #include "sdhci-pltfm.h"
>
> +#define PXAV3_RPM_DELAY_MS 50
> +
> #define SD_CLOCK_BURST_SIZE_SETUP 0x10A
> #define SDCLK_SEL 0x100
> #define SDCLK_DELAY_SHIFT 9
> @@ -253,8 +258,9 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
> goto err_clk_get;
> }
> pltfm_host->clk = clk;
> +#ifndef CONFIG_PM_RUNTIME
I think it would be better to always enable the clk and the resourses
you need in the probe function.
To reflect that in runtime PM you shall use:
pm_runtime_enable
pm_runtime_get_noresume
pm_runtime_set_active
When you leave your probe function do pm_runtime_put*, to put back
your resources and maybe enter
Thus you can get rid of the ifdefs in the probe function.
> clk_prepare_enable(clk);
> -
> +#endif
> host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
> | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
> | SDHCI_QUIRK_32BIT_ADMA_SIZE
> @@ -303,9 +309,17 @@ static int sdhci_pxav3_probe(struct platform_device
> *pdev)
>
> sdhci_get_of_property(pdev);
>
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev,
> + PXAV3_RPM_DELAY_MS);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_suspend_ignore_children(&pdev->dev, 1);
> +
> ret = sdhci_add_host(host);
> if (ret) {
> dev_err(&pdev->dev, "failed to add host\n");
> + pm_runtime_forbid(&pdev->dev);
> + pm_runtime_get_noresume(&pdev->dev);
> goto err_add_host;
> }
>
> @@ -314,7 +328,9 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
> return 0;
>
> err_add_host:
> +#ifndef CONFIG_PM_RUNTIME
> clk_disable_unprepare(clk);
> +#endif
> clk_put(clk);
> mmc_gpio_free_cd(host->mmc);
> err_cd_req:
> @@ -332,8 +348,10 @@ static int sdhci_pxav3_remove(struct platform_device
> *pdev)
> struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
>
> sdhci_remove_host(host, 1);
> -
> + pm_runtime_disable(&pdev->dev);
> +#ifndef CONFIG_PM_RUNTIME
> clk_disable_unprepare(pltfm_host->clk);
> +#endif
> clk_put(pltfm_host->clk);
>
> if (gpio_is_valid(pdata->ext_cd_gpio))
> @@ -347,6 +365,71 @@ static int sdhci_pxav3_remove(struct platform_device
> *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int sdhci_pxav3_suspend(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> +
> + return sdhci_suspend_host(host);
> +}
> +
> +static int sdhci_pxav3_resume(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> +
> + return sdhci_resume_host(host);
> +}
> +#endif
> +
> +#ifdef CONFIG_PM_RUNTIME
> +static int sdhci_pxav3_runtime_suspend(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + unsigned long flags;
> +
> + if (pltfm_host->clk) {
> + spin_lock_irqsave(&host->lock, flags);
> + host->runtime_suspended = true;
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> + clk_disable_unprepare(pltfm_host->clk);
> + }
> +
> + return 0;
> +}
> +
> +static int sdhci_pxav3_runtime_resume(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + unsigned long flags;
> +
> + if (pltfm_host->clk) {
> + clk_prepare_enable(pltfm_host->clk);
> +
> + spin_lock_irqsave(&host->lock, flags);
> + host->runtime_suspended = false;
> + spin_unlock_irqrestore(&host->lock, flags);
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_PM
> +static const struct dev_pm_ops sdhci_pxav3_pmops = {
> + SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
> + SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
> + sdhci_pxav3_runtime_resume, NULL)
> +};
> +
> +#define SDHCI_PXAV3_PMOPS (&sdhci_pxav3_pmops)
> +
> +#else
> +#define SDHCI_PXAV3_PMOPS NULL
> +#endif
> +
> static struct platform_driver sdhci_pxav3_driver = {
> .driver = {
> .name = "sdhci-pxav3",
> @@ -354,7 +437,7 @@ static struct platform_driver sdhci_pxav3_driver = {
> .of_match_table = sdhci_pxav3_of_match,
> #endif
> .owner = THIS_MODULE,
> - .pm = SDHCI_PLTFM_PMOPS,
> + .pm = SDHCI_PXAV3_PMOPS,
> },
> .probe = sdhci_pxav3_probe,
> .remove = sdhci_pxav3_remove,
> --
> 1.7.0.4
>
Kind regards
Ulf Hansson
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
